Laserfiche WebLink
3/28/2024 <br />RE: Structural Certification for Installation of Residential Solar <br /> LISVETH MENDOZA:1504 S PARTON ST, SANTA ANA, CA 92707 <br />Attn: To Whom It May Concern <br />Design Criteria <br />Code 2022 California Building Code (ASCE 7-16) <br />Risk category II Wind Load (component and Cladding) <br />Roof Dead Load Dr 10 psf V 96 mph <br />PV Dead Load DPV 3 psf Exposure C <br />Roof Live Load Lr 20 psf <br />Ground Snow S 0 psf <br />If you have any questions on the above, please do not hesitate to call. <br />Sincerely, <br />Eugene Munyanziza, P.E. <br />EV Engineering, LLC <br />projects@evengineersnet.com Signed 3/28/2024 <br />http://www.evengineersnet.com <br />Exp: 06/30/2024 <br />This Letter is for the existing roof framing which supports the new PV modules as well as the attachment of the <br />PV system to existing roof framing. From the field observation report, the roof is made of Composition shingle <br />roofing over roof plywood supported by 2X4 Rafters at 24 inches. The slope of the roof was approximated to be <br />13 and 19 degrees. <br />After review and based on our structural capacity calculation, the existing roof framing has been determined to <br />be adequate to support the imposed loads without structural upgrades. <br /> I certify that the PV module assembly including all attachments supporting it have been reviewed to be in <br />accordance with manufacturer's specifications. Capacity Calculations were done in accordance with applicable <br />building codes. <br />projects@evengineersnet.com <br />http://www.evengineersnet.com <br />1504 S Parton St <br />5/8/2024