|
731 South Highway 101, Suite 1M,
<br />Solana Beach, CA 92075
<br />(714) 639-9860
<br />ry-aoarchitects.com
<br />Plan Check Number:
<br />Project Number:
<br />20
<br />2
<br />2
<br />
<br />R
<br />Y
<br />+
<br />A
<br />O
<br />,
<br />
<br />L
<br />L
<br />P
<br />Th
<br />e
<br />s
<br />e
<br />
<br />p
<br />l
<br />a
<br />n
<br />s
<br />
<br />a
<br />r
<br />e
<br />
<br />c
<br />o
<br />p
<br />y
<br />r
<br />i
<br />g
<br />h
<br />t
<br />
<br />p
<br />r
<br />o
<br />t
<br />e
<br />c
<br />t
<br />e
<br />d
<br />.
<br />
<br />
<br />U
<br />n
<br />d
<br />e
<br />r
<br />
<br />s
<br />u
<br />c
<br />h
<br />
<br />p
<br />r
<br />ot
<br />e
<br />c
<br />t
<br />i
<br />o
<br />n
<br />
<br />u
<br />n
<br />a
<br />u
<br />t
<br />h
<br />o
<br />r
<br />i
<br />z
<br />e
<br />d
<br />
<br />u
<br />s
<br />e
<br />
<br />i
<br />s
<br />
<br />n
<br />o
<br />t
<br />
<br />p
<br />e
<br />r
<br />m
<br />i
<br />t
<br />t
<br />e
<br />d
<br />.
<br />
<br />T
<br />h
<br />e
<br />s
<br />e
<br />
<br />p
<br />la
<br />n
<br />s
<br />
<br />s
<br />h
<br />a
<br />l
<br />l
<br />
<br />n
<br />o
<br />t
<br />
<br />b
<br />e
<br />
<br />r
<br />e
<br />p
<br />r
<br />o
<br />d
<br />u
<br />c
<br />e
<br />d
<br />
<br />o
<br />r
<br />
<br />u
<br />s
<br />e
<br />d
<br />
<br />w
<br />i
<br />t
<br />h
<br />o
<br />u
<br />t
<br />
<br />w
<br />r
<br />i
<br />t
<br />t
<br />e
<br />n
<br />p
<br />e
<br />r
<br />m
<br />i
<br />s
<br />s
<br />i
<br />o
<br />n
<br />
<br />b
<br />y
<br />
<br />A
<br />r
<br />c
<br />h
<br />i
<br />t
<br />e
<br />c
<br />t
<br />s
<br />
<br />O
<br />r
<br />a
<br />n
<br />g
<br />e
<br />.
<br />c
<br />SEAL
<br />CONSULTANT
<br />Dr
<br />a
<br />w
<br />i
<br />n
<br />g
<br />
<br />F
<br />i
<br />l
<br />e
<br />
<br />N
<br />a
<br />m
<br />e
<br />:
<br />Sh
<br />e
<br />e
<br />t
<br />
<br />P
<br />l
<br />o
<br />t
<br />t
<br />e
<br />d
<br />:
<br />S H E E T
<br />--
<br />C:
<br />\
<br />U
<br />s
<br />e
<br />r
<br />s
<br />\
<br />r
<br />o
<br />b
<br />e
<br />r
<br />t
<br />s
<br />\
<br />O
<br />n
<br />e
<br />D
<br />r
<br />i
<br />v
<br />e
<br />
<br />-
<br />
<br />A
<br />O
<br />\
<br />D
<br />o
<br />c
<br />u
<br />m
<br />e
<br />n
<br />t
<br />s
<br />\
<br />2
<br />0
<br />2
<br />3
<br />-
<br />0
<br />6
<br />4
<br />6
<br />
<br />SC
<br />E
<br />
<br />S
<br />a
<br />n
<br />t
<br />a
<br />
<br />A
<br />n
<br />a
<br />
<br />B
<br />l
<br />d
<br />g
<br />
<br />C
<br />
<br />S
<br />e
<br />i
<br />s
<br />m
<br />i
<br />c
<br />
<br />R
<br />e
<br />t
<br />r
<br />o
<br />f
<br />i
<br />t
<br />_
<br />a
<br />o
<br />_
<br />c
<br />o
<br />m
<br />m
<br />_
<br />r
<br />o
<br />b
<br />e
<br />r
<br />ts
<br />.
<br />r
<br />v
<br />t
<br />6/
<br />1
<br />1
<br />/
<br />2
<br />0
<br />2
<br />4
<br />
<br />5
<br />:
<br />4
<br />0
<br />:
<br />1
<br />2
<br />
<br />P
<br />M
<br />CA
<br />L
<br />G
<br />R
<br />E
<br />E
<br />N
<br />
<br />C
<br />H
<br />E
<br />C
<br />K
<br />L
<br />I
<br />S
<br />T
<br />
<br />2
<br />0
<br />2
<br />2
<br />2023-0646
<br />8631 RUSH STREET
<br />ROSEMEAD, CA 91770
<br />626-302-3687
<br />SOUTHERN CALIFORNIA EDISON
<br />SC
<br />E
<br />
<br />-
<br />
<br />S
<br />a
<br />n
<br />t
<br />a
<br />
<br />A
<br />n
<br />a
<br />
<br />B
<br />l
<br />d
<br />g
<br />
<br />C
<br />
<br />V
<br />o
<br />l
<br />u
<br />n
<br />t
<br />a
<br />r
<br />y
<br />Se
<br />i
<br />s
<br />m
<br />i
<br />c
<br />
<br />R
<br />e
<br />t
<br />r
<br />o
<br />f
<br />i
<br />t
<br />13
<br />2
<br />7
<br />
<br />S
<br />O
<br />U
<br />T
<br />H
<br />
<br />G
<br />R
<br />A
<br />N
<br />D
<br />
<br />A
<br />V
<br />E
<br />N
<br />U
<br />E
<br />SA
<br />N
<br />T
<br />A
<br />
<br />A
<br />N
<br />A
<br />,
<br />
<br />C
<br />A
<br />
<br />9
<br />2
<br />7
<br />0
<br />5
<br />101119260
<br />T4.0
<br />2024-01-24 Issue for Plan Check
<br />2024-02-21 Issue for City Planning
<br />2024-06-11 Re-Issue for Plan Check
<br />2022 CALIFORNIA GREEN BUILDING STANDARD CODE
<br />NON-RESIDENTIAL MANDATORY MEASURES
<br />PROJ. REQUIREMENT MANDATORY FEATURE OR MEASURE COMPLIANCE
<br />DIVISION 5.5 – ENVIRONMENTAL QUALITY CONTINUED
<br />5.504.4.1 ADHESIVES, SEALANTS AND CAULKS
<br />ADHESIVES, SEALANTS AND CAULKS USED ON THE PROJECT SHALL MEET THE REQUIREMENTS OF THE FOLLOWING STANDARDS:
<br />1. ADHESIVES, ADHESIVE BONDING PRIMERS, ADHESIVE PRIMERS, SEALANTS, SEALANT PRIMERS AND CAULKS SHALL COMPLY WITH
<br />LOCAL OR REGIONAL AIR POLLUTION CONTROL OR AIR QUALITY MANAGEMENT DISTRICT RULES WHERE APPLICABLE, OR SCAQMD
<br />RULE 1168 VOC LIMITS, AS SHOWN IN TABLES 5.504.4.1 AND 5.504.4.2. SUCH PRODUCTS ALSO SHALL COMPLY WITH THE RULE 1168
<br />PROHIBITION ON THE USE OF CERTAIN TOXIC COMPOUNDS (CHLOROFORM, ETHYLENE DICHLORIDE, METHYLENE CHLORIDE,
<br />PERCHLOROETHYLENE AND TRICHLOROETHYLENE), EXCEPT FOR AEROSOL PRODUCTS AS SPECIFIED IN SUBSECTION 2, BELOW.
<br />2. AEROSOL ADHESIVES, AND SMALLER UNIT SIZES OF ADHESIVES, AND SEALANT OR CAULKING COMPOUNDS (IN UNITS OF PRODUCT,
<br />LESS PACKAGING, WHICH DO NOT WEIGH MORE THAN ONE POUND AND DO NOT CONSIST OF MORE THAN 16 FLUID OUNCES) SHALL
<br />COMPLY WITH STATEWIDE VOC STANDARDS AND OTHER REQUIREMENTS, INCLUDING PROHIBITIONS ON USE OF CERTAIN TOXIC
<br />COMPOUNDS, OF CALIFORNIA CODE OF REGULATIONS, TITLE 17, COMMENCING WITH SECTION 94507.
<br />5.504.4.3 PAINTS AND COATINGS
<br />ARCHITECTURAL PAINTS AND COATINGS SHALL COMPLY WITH VOC LIMITS IN TABLE 1 OF THE ARB ARCHITECTURAL COATINGS
<br />SUGGESTED CONTROL MEASURE, AS SHOWN IN TABLE 5.504.4.3, UNLESS MORE STRINGENT LOCAL LIMITS APPLY. THE VOC CONTENT
<br />LIMIT FOR COATINGS THAT DO NOT MEET THE DEFINITIONS FOR THE SPECIALTY COATINGS CATEGORIES LISTED IN TABLE 5.504.4.3
<br />SHALL BE DETERMINED BY CLASSIFYING THE COATING AS A FLAT, NONFLAT OR NONFLAT-HIGH GLOSS COATING, BASED ON ITS GLOSS,
<br />AS DEFINED IN SUBSECTIONS 4.21, 4.36 AND 4.37 OF THE 2007 CALIFORNIA AIR RESOURCES BOARD SUGGESTED CONTROL MEASURE,
<br />AND THE CORRESPONDING FLAT, NONFLAT OR NONFLAT-HIGH GLOSS VOC LIMIT IN TABLE 5.504.4.3 SHALL APPLY.
<br />5.504.4.3.1 AEROSOL PAINTS AND COATINGS: AEROSOL PAINTS AND COATINGS SHALL MEET THE PWMIR LIMITS FOR ROC IN SECTION
<br />94522(A)(3) AND OTHER REQUIREMENTS, INCLUDING PROHIBITIONS ON USE OF CERTAIN TOXIC COMPOUNDS AND OZONE DEPLETING
<br />SUBSTANCES, IN SECTIONS 94522(C)(2) AND (D)(2) OF CALIFORNIA CODE OF REGULATIONS, TITLE 17, COMMENCING WITH SECTION
<br />94520; AND IN AREAS UNDER THE JURISDICTION OF THE BAY AREA AIR QUALITY MANAGEMENT DISTRICT ADDITIONALLY COMPLY WITH
<br />THE PERCENT VOC BY WEIGHT OF PRODUCT LIMITS OF REGULATION 8 RULE 49.
<br />5.504.4.3.2 VERIFICATION: VERIFICATION OF COMPLIANCE WITH THIS SECTION SHALL BE PROVIDED AT THE REQUEST OF THE
<br />ENFORCING AGENCY. DOCUMENTATION MAY INCLUDE, BUT IS NOT LIMITED TO, THE FOLLOWING:
<br />1. MANUFACTURER'S PRODUCT SPECIFICATION
<br />2. FIELD VERIFICATION OF ON-SITE PRODUCT CONTAINERS
<br />SEALANTS VOC LIMIT
<br />ARCHITECTURAL 250
<br />MARINE DECK
<br />NONMEMBRANE ROOF
<br />ROADWAY
<br />SINGLE-PLY ROOF MEMBRANE
<br />OTHER
<br />SEALANT PRIMERS
<br />ARCHITECTURAL
<br /> NONPOROUS
<br /> POROUS
<br />MODIFIED BITUMINOUS
<br />MARINE DECK
<br />OTHER
<br />NOTE: FOR ADDITIONAL INFORMATION REGARDING
<br />METHODS TO MEASURE THE VOC CONTENT SPECIFIED IN
<br />THESE TABLES, SEE SOUTH COAST AIR QUALITY
<br />MANAGEMENT DISTRICT RULE 1168.
<br />TABLE 5.504.4.3
<br />VOC CONTENT LIMITS FOR ARCHITECTURAL COATINGS 2, 3
<br />GRAMS OF VOC PER LITER OF COATING,
<br />LESS WATER AND LESS EXEMPT COMPOUNDS
<br />COATING CATEGORY CURRENT LIMIT
<br />FLAT COATINGS 50
<br />NONFLAT COATINGS 100
<br />NONFLAT-HIGH GLOSS COATINGS 150
<br />SPECIALTY COATINGS
<br />ALUMINUM ROOF COATINGS 400
<br />BASEMENT SPECIALTY COATINGS 400
<br />BITUMINOUS ROOF COATINGS 50
<br />BITUMINOUS ROOF PRIMERS 350
<br />BOND BREAKERS 350
<br />CONCRETE CURING COMPOUNDS 350
<br />CONCRETE/MASONRY SEALERS 100
<br />DRIVEWAY SEALERS 50
<br />DRY FOG COATINGS 150
<br />FAUX FINISHING COATINGS 350
<br />FIRE RESISTIVE COATINGS 350
<br />FLOOR COATINGS 100
<br />FORM-RELEASE COMPOUNDS 250
<br />GRAPHIC ARTS COATINGS (SIGN PAINTS) 500
<br />HIGH TEMPERATURE COATINGS 420
<br />INDUSTRIAL MAINTENANCE COATINGS 250
<br />LOW SOLIDS COATINGS1 120
<br />MAGNESITE CEMENT COATINGS 450
<br />MASTIC TEXTURE COATINGS 100
<br />METALLIC PIGMENTED COATINGS 500
<br />MULTICOLOR COATINGS 250
<br />PRETREATMENT WASH PRIMERS 420
<br />PRIMERS, SEALERS, AND UNDERCOATERS 100
<br />REACTIVE PENETRATING SEALERS 350
<br />RECYCLED COATINGS 250
<br />ROOF COATINGS 50
<br />RUST PREVENTATIVE COATINGS 250
<br />SHELLACS
<br /> CLEAR 730
<br /> OPAQUE 550
<br />SPECIALTY PRIMERS, SEALERS & UNDERCOATERS 100
<br />STAINS 250
<br />STONE CONSOLIDANTS 450
<br />SWIMMING POOL COATINGS 340
<br />TRAFFIC MARKING COATINGS 100
<br />TUB AND TILE REFINISH COATINGS 420
<br />WATERPROOFING MEMBRANES 250
<br />WOOD COATINGS 275
<br />WOOD PRESERVATIVES 350
<br />ZINC-RICH PRIMERS 340
<br />1. GRAMS OF VOC PER LITER OF COATING, INCLUDING WATER AND
<br />INCLUDING EXEMPT COMPOUNDS.
<br />2. THE SPECIFIED LIMITS REMAIN IN EFFECT UNLESS REVISED LIMITS
<br />ARE LISTED IN SUBSEQUENT COLUMNS IN THE TABLE.
<br />3. VALUES IN THIS TABLE ARE DERIVED FROM THOSE SPECIFIED BY
<br />THE CALIFORNIA AIR RESOURCES BOARD, ARCHITECTURAL
<br />COATINGS SUGGESTED CONTROL MEASURE, FEBRUARY 1, 2008.
<br />MORE INFORMATION IS AVAILABLE FROM THE AIR RESOURCES
<br />BOARD.
<br />PRODUCT
<br />HARDWOOD PLYWOOD VENEER CORE
<br />HARDWOOD PLYWOOD COMPOSITE CORE
<br />PARTICLEBOARD
<br />MEDIUM DENSITY FIBERBOARD
<br />THIN MEDIUM DENSITY FIBERBOARD 2
<br />5.504.4.4 CARPET SYSTEMS
<br />ALL CARPET INSTALLED IN THE BUILDING INTERIOR SHALL MEET THE REQUIREMENTS OF THE CALIFORNIA DEPARTMENT OF PUBLIC
<br />HEALTH, "STANDARD METHOD FOR THE TESTING AND EVALUATION OF VOLATILE ORGANIC CHEMICAL EMISSIONS FROM INDOOR
<br />SOURCES USING ENVIRONMENTAL CHAMBERS," VERSION 1.2, JANUARY 2017 (EMISSION TESTING METHOD FOR CALIFORNIA
<br />SPECIFICATION 01350). SEE CALIFORNIA DEPARTMENT OF PUBLIC HEALTH'S WEBSITE FOR CERTIFICATION PROGRAMS AND TESTING
<br />LABS.
<br />5.504.4.4.1 CARPET CUSHION: ALL CARPET CUSHION INST ALLED IN THE BUILDING INTERIOR SHALL MEET THE REQUIREMENTS OF THE
<br />CALIFORNIA DEPARTMENT OF PUBLIC HEALTH, "STANDARD METHOD FOR THE TESTING AND EVALUATION OF VOLATILE ORGANIC
<br />CHEMICAL EMISSIONS FROM INDOOR SOURCES USING ENVIRONMENTAL CHAMBERS," VERSION 1.2, JANUARY 2017 (EMISSION TESTING
<br />METHOD FOR CALIFORNIA SPECIFICATION 01350).SEE CALIFORNIA DEPARTMENT OF PUBLIC HEALTH'S WEBSITE FOR CERTIFICATION
<br />PROGRAMS AND TESTING LABS.
<br />5.504.4.4.2 CARPET ADHESIVE: ALL CARPET ADHESIVE SHALL MEET THE REQUIREMENTS OF TABLE 5.504.4.1.
<br />5.504.4.5 COMPOSITE WOOD PRODUCTS
<br />HARDWOOD PLYWOOD, PARTICLEBOARD AND MEDIUM DENSITY FIBERBOARD COMPOSITE WOOD PRODUCTS USED ON THE INTERIOR
<br />OR EXTERIOR OF THE BUILDING SHALL MEET THE REQUIREMENTS FOR FORMALDEHYDE AS SPECIFIED IN ARB'S AIR TOXICS CONTROL
<br />MEASURE (ATCM) FOR COMPOSITE WOOD (17 CCR 93120 ET SEQ.) THOSE MATERIALS NOT EXEMPTED UNDER THE ATCM MUST MEET
<br />THE SPECIFIED EMISSION LIMITS, AS SHOWN IN TABLE 5.504.4.5.
<br />5.504.4.5.3 DOCUMENTATION: VERIFICATION OF COMPLIANCE WITH THIS SECTION SHALL BE PROVIDED AS REQUESTED BY THE
<br />ENFORCING AGENCY. DOCUMENTATION SHALL INCLUDE AT LEAST ONE OF THE FOLLOWING:
<br />1. PRODUCT CERTIFICATIONS AND SPECIFICATIONS.
<br />2. CHAIN OF CUSTODY CERTIFICATIONS.
<br />3. PRODUCT LABELED AND INVOICED AS MEETING THE COMPOSITE WOOD PRODUCTS REGULATION
<br />4. EXTERIOR GRADE PRODUCTS MARKED AS MEETING THE PS-1 OR PS-2 STANDARDS OF THE ENGINEERED WOOD ASSOCIATION, THE
<br />AUSTRALIAN AS/NZS 2269 OR EUROPEAN 636 3S STANDARDS.
<br />5. OTHER METHODS ACCEPTABLE TO THE ENFORCING AGENCY.
<br />5.504.4.6 RESILIENT FLOORING SYSTEMS
<br />WHERE RESILIENT FLOORING IS INSTALLED, AT LEAST 80 PERCENT OF FLOOR AREA RECEIVING RESILIENT FLOORING SHALL MEET THE
<br />REQUIREMENTS OF THE CALIFORNIA DEPARTMENT OF PUBLIC HEALTH, "STANDARD METHOD FOR THE TESTING AND EVALUATION OF
<br />VOLATILE ORGANIC CHEMICAL EMISSIONS FROM INDOOR SOURCES USING ENVIRONMENTAL CHAMBERS," VERSION 1.2, JANUARY 2017
<br />(EMISSION TESTING METHOD FOR CALIFORNIA SPECIFICATION 01350).
<br />SEE CALIFORNIA DEPARTMENT OF PUBLIC HEALTH'S WEBSITE FOR CERTIFICATION PROGRAMS AND TESTING LABS.
<br />5.504.4.6.1 VERIFICATION OF COMPLIANCE: DOCUMENTATION SHALL BE PROVIDED VERIFYING THAT RESILIENT FLOORING MATERIALS
<br />MEET THE POLLUTANT EMISSION LIMITS.
<br />5.504.7 ENVIRONMENTAL TOBACCO SMOKE (ETS) CONTROL
<br />WHERE OUTDOOR AREAS ARE PROVIDED FOR SMOKING, PROHIBIT SMOKING WITHIN 25 FEET OF BUILDING ENTRIES, OUTDOOR AIR
<br />INTAKES AND OPERABLE WINDOWS AND WITHIN THE BUILDING AS ALREADY PROHIBITED BY OTHER LAWS OR REGULATIONS; OR AS
<br />ENFORCED BY ORDINANCES, REGULATIONS OR POLICIES OF ANY CITY, COUNTY, CITY AND COUNTY, CALIFORNIA COMMUNITY COLLEGE,
<br />CAMPUS OF THE CALIFORNIA STATE UNIVERSITY, OR CAMPUS OF THE UNIVERSITY OF CALIFORNIA, WHICHEVER ARE MORE STRINGENT.
<br />WHEN ORDINANCES, REGULATIONS OR POLICIES ARE NOT IN PLACE, POST SIGNAGE TO INFORM BUILDING OCCUPANTS OF THE
<br />PROHIBITIONS.
<br />5.505.1 INDOOR MOISTURE CONTROL:
<br />BUILDINGS SHALL MEET OR EXCEED THE PROVISIONS OF CALIFORNIA BUILDING CODE, CCR, TITLE 24, PART 2, SECTIONS 1202
<br />(VENTILATION) AND CHAPTER 14 (EXTERIOR WALLS). FOR ADDITIONAL MEASURES NOT APPLICABLE TO LOW-RISE RESIDENTIAL
<br />OCCUPANCIES, SEE SECTION 5.407.2 OF THIS CODE.
<br />5.506.2 CARBON DIOXIDE (CO2) MONITORING
<br />FOR BUILDINGS OR ADDITIONS EQUIPPED WITH DEMAND CONTROL VENTILATION, CO2 SENSORS AND VENTILATION CONTROLS SHALL BE SPECIFIED
<br />AND INSTALLED IN ACCORDANCE WITH THE REQUIREMENTS OF THE CALIFORNIA ENERGY CODE, SECTION 120.1(C)(4).
<br />5.507.4.3 INTERIOR SOUND TRANSMISSION:
<br />WALL AND FLOOR-CEILING ASSEMBLIES SEPARATING TENANT SPACES AND TENANT SPACES AND PUBLIC PLACES SHALL HAVE AN STC OF AT LEAST 40.
<br />NOTE: EXAMPLES OF ASSEMBLIES AND THEIR VARIOUS STC RATINGS MAY BE FOUND AT THE CALIFORNIA OFFICE OF NOISE CONTROL
<br />PROJ. REQUIREMENT MANDATORY FEATURE OR MEASURE COMPLIANCE
<br />ARCHITECTURAL APPLICATIONS VOC LIMIT
<br />INDOOR CARPET ADHESIVES
<br />CARPET PAD ADHESIVES
<br />OUTDOOR CARPET ADHESIVES
<br />WOOD FLOORING ADHESIVE
<br />RUBBER FLOOR ADHESIVES
<br />SUBFLOOR ADHESIVES
<br />CERAMIC TILE ADHESIVES
<br />VCT AND ASPHALT TILE ADHESIVES
<br />DRYWALL AND PANEL ADHESIVES
<br />COVE BASE ADHESIVES
<br />MULTIPURPOSE CONSTRUCTION ADHESIVES
<br />STRUCTURAL GLAZING ADHESIVES
<br />SINGLE-PLY ROOF MEMBRANE ADHESIVES
<br />OTHER ADHESIVE NOT SPECIFICALLY LISTED
<br />SPECIALTY APPLICATIONS
<br />PVC WELDING
<br />CPVC WELDING
<br />ABS WELDING
<br />PLASTIC CEMENT WELDING
<br />ADHESIVE PRIMER FOR PLASTIC
<br />CONTACT ADHESIVE
<br />SPECIAL PURPOSE CONTACT ADHESIVE
<br />STRUCTURAL WOOD MEMBER ADHESIVE
<br />TOP AND TRIM ADHESIVE
<br />SUBSTRATE SPECIFIC APPLICATIONS
<br />METAL TO METAL
<br />PLASTIC FOAMS
<br />POROUS MATERIAL (EXCEPT WOOD)
<br />WOOD
<br />FIBERGLASS
<br />1. IF AN ADHESIVE IS USED TO BOND DISSIMILAR
<br />SUBSTRATES TOGETHER THE ADHESIVE WITH THE
<br />HIGHEST VOC CONTENT SHALL BE ALLOWED.
<br />2. FOR ADDITIONAL INFORMATION REGARDING METHODS
<br />TO MEASURE THE VOC CONTENT SPECIFIED IN THIS
<br />TABLE, SEE SOUTH COAST AIR QUALITY MANAGEMENT
<br />DISTRICT RULE 1168, .
<br />50
<br />50
<br />150
<br />100
<br />60
<br />50
<br />65
<br />50
<br />50
<br />50
<br />70
<br />100
<br />250
<br />50
<br />510
<br />490
<br />325
<br />250
<br />550
<br />80
<br />250
<br />140
<br />250
<br />30
<br />50
<br />50
<br />30
<br />80
<br />TABLE 5.504.4.1
<br />ADHESIVE VOC LIMIT 1,2
<br />LESS WATER & LESS EXEMPT COMPOUNDS
<br />IN GRAMS PER LITER
<br />760
<br />300
<br />250
<br />450
<br />420
<br />250
<br />775
<br />500
<br />760
<br />750
<br />TABLE 5.504.4.2
<br />SEALANT VOC LIMIT
<br />LESS WATER AND LESS EXEMPT COMPOUNDS
<br />IN GRAMS PER LITER
<br />5.508 OUTDOOR AIR QUALITY
<br />5.508.1.1 CHLOROFLUOROCARBONS (CFCS): INSTALL HVAC, REFRIGERATION AND FIRE SUPPRESSION EQUIPMENT THAT DO NOT CONTAIN CFCS.
<br />5.508.1.2 HALONS: INSTALL HVAC, REFRIGERATION AND FIRE SUPPRESSION EQUIPMENT THAT DO NOT CONTAIN HALONS.
<br />5.508.2 SUPERMARKET REFRIGERANT LEAK REDUCTION
<br />NEW COMMERCIAL REFRIGERATION SYSTEMS SHALL COMPLY WITH THE PROVISIONS OF THIS SECTION WHEN INSTALLED IN RETAIL FOOD STORES
<br />8,000 SQUARE FEET OR MORE CONDITIONED AREA, AND THAT UTILIZE EITHER REFRIGERATED DISPLAY CASES, OR WALK-IN COOLERS OR
<br />FREEZERS CONNECTED TO REMOTE COMPRESSOR UNITS OR CONDENSING UNITS. THE LEAK REDUCTION MEASURES APPLY TO REFRIGERATION
<br />SYSTEMS CONTAINING HIGH-GLOBAL-WARMING POTENTIAL (HIGH-GWP) REFRIGERANTS WITH A GWP OF 150 OR GREATER. NEW REFRIGERATION
<br />SYSTEMS INCLUDE BOTH NEW FACILITIES AND THE REPLACEMENT OF EXISTING REFRIGERATION SYSTEMS IN EXISTING FACILITIES.
<br />EXCEPTION: REFRIGERATION SYSTEMS CONTAINING LOW-GLOBAL WARMING POTENTIAL (LOW-GWP) REFRIGERANT WITH A GWP VALUE LESS THAN
<br />150 ARE NOT SUBJECT TO THIS SECTION. LOW-GWP REFRIGERANTS ARE NONOZONE-DEPLETING REFRIGERANTS THAT INCLUDE AMMONIA, CARBON
<br />DIOXIDE (CO2), AND POTENTIALLY OTHER REFRIGERANTS.
<br />5.508.2.1 REFRIGERANT PIPING: PIPING COMPLIANT WITH THE CALIFORNIA MECHANICAL CODE SHALL BE INSTALLED TO BE ACCESSIBLE FOR LEAK
<br />PROTECTION AND REPAIRS. PIPING RUNS USING THREADED PIPE, COPPER TUBING WITH AN OUTSIDE DIAMETER (OD) LESS THAN 1/4 INCH,
<br />FLARED TUBING CONNECTIONS AND SHORT RADIUS ELBOWS SHALL NOT BE USED IN REFRIGERANT SYSTEMS EXCEPT AS NOTED BELOW.
<br />5.508.2.1.1 THREADED PIPE: THREADED CONNECTIONS ARE PERMITTED AT THE COMPRESSOR RACK.
<br />5.508.2.1.2 COPPER PIPE: COPPER TUBING WITH AN OD LESS THAN 1/4 INCH MAY BE USED IN SYSTEMS WITH A REFRIGERANT CHARGE OF 5
<br />POUNDS OR LESS.
<br />5.508.2.1.2.1 ANCHORAGE: ONE-FOURTH-INCH OD TUBING SHALL BE SECURELY CLAMPED TO A RIGID BASE TO KEEP VIBRATION LEVELS BELOW 8
<br />MILS.
<br />5.508.2.1.3 FLARED TUBING CONNECTIONS: DOUBLE-FLARED TUBING CONNECTIONS MAY BE USED FOR PRESSURE CONTROLS, VALVE PILOT LINES
<br />AND OIL.
<br />EXCEPTION: SINGLE-FLARED TUBING CONNECTIONS MAY BE USED WITH A MULTIRING SEAL COATED WITH INDUSTRIAL SEALANT SUITABLE FOR
<br />USE WITH REFRIGERANTS AND TIGHTENED IN ACCORDANCE WITH MANUFACTURER'S RECOMMENDATIONS.
<br />5.508.2.1.4 ELBOWS: SHORT RADIUS ELBOWS ARE ONLY PERMITTED WHERE SPACE LIMITATIONS PROHIBIT USE OF LONG RADIUS ELBOWS.
<br />5.508.2.2 VALVES VALVES AND FITTINGS SHALL COMPLY WITH THE CALIFORNIA MECHANICAL CODE AND AS FOLLOWS.
<br />5.508.2.2.1 PRESSURE RELIEF VALVES: FOR VESSELS CONTAINING HIGH-GWP REFRIGERANT, A RUPTURE DISC SHALL BE INSTALLED BETWEEN
<br />THE OUTLET OF THE VESSEL AND THE INLET OF THE PRESSURE RELIEF VALVE.
<br />5.508.2.2.1.1 PRESSURE DETECTION: A PRESSURE GAUGE, PRESSURE TRANSDUCER OR OTHER DEVICE SHALL BE INSTALLED IN THE SPACE
<br />BETWEEN THE RUPTURE DISC AND THE RELIEF VALVE INLET TO INDICATE A DISC RUPTURE OR DISCHARGE OF THE RELIEF VALVE.
<br />5.508.2.2.2 ACCESS VALVES: ONLY SCHRADER ACCESS VALVES WITH A BRASS OR STEEL BODY ARE PERMITTED FOR USE.
<br />5.508.2.2.2.1 VALVE CAPS: FOR SYSTEMS WITH A REFRIGERANT CHARGE OF 5 POUNDS OR MORE, VALVE CAPS SHALL BE BRASS OR STEEL AND
<br />NOT PLASTIC.
<br />5.508.2.2.2.2 SEAL CAPS: IF DESIGNED FOR IT, THE CAP SHALL HAVE A NEOPRENE O-RING IN PLACE.
<br />5.508.2.2.2.2.1 CHAIN TETHERS: CHAIN TETHERS TO FIT OVER THE STEM ARE REQUIRED FOR VALVES DESIGNED TO HAVE SEAL CAPS.
<br />EXCEPTION:VALVES WITH SEAL CAPS THAT ARE NOT REMOVED FROM THE VALVE DURING STEM OPERATION.
<br />5.508.2.3 REFRIGERATED SERVICE CASES: REFRIGERATED SERVICE CASES HOLDING FOOD PRODUCTS CONTAINING VINEGAR AND SALT SHALL
<br />HAVE EVAPORATOR COILS OF CORROSION-RESISTANT MATERIAL, SUCH AS STAINLESS STEEL; OR BE COATED TO PREVENT CORROSION FROM
<br />THESE SUBSTANCES.
<br />5.508.2.3.1 COIL COATING: CONSIDERATION SHALL BE GIVEN TO THE HEAT TRANSFER EFFICIENCY OF COIL COATING TO MAXIMIZE ENERGY
<br />EFFICIENCY.
<br />5.508.2.4 REFRIGERANT RECEIVERS: REFRIGERANT RECEIVERS WITH CAPACITIES GREATER THAN 200 POUNDS SHALL BE FITTED WITH A DEVICE
<br />THAT INDICATES THE LEVEL OF REFRIGERANT IN THE RECEIVER.
<br />5.508.2.5 PRESSURE TESTING: THE SYSTEM SHALL BE PRESSURE TESTED DURING INSTALLATION PRIOR TO EVACUATION AND CHARGING.
<br />5.508.2.5.1 MINIMUM PRESSURE: THE SYSTEM SHALL BE CHARGED WITH REGULATED DRY NITROGEN AND APPROPRIATE TRACER GAS TO BRING
<br />SYSTEM PRESSURE UP TO 300 PSIG MINIMUM.
<br />5.508.2.5.2 LEAKS: CHECK THE SYSTEM FOR LEAKS, REPAIR ANY LEAKS AND RETEST FOR PRESSURE USING THE SAME GAUGE.
<br />5.508.2.5.3 ALLOWABLE PRESSURE CHANGE: THE SYSTEM SHALL STAND, UNALTERED, FOR 24 HOURS WITH NO MORE THAN A +/- ONE POUND
<br />PRESSURE CHANGE FROM 300 PSIG, MEASURED WITH THE SAME GAUGE.
<br />5.508.2.6 EVACUATION: THE SYSTEM SHALL BE EVACUATED AFTER PRESSURE TESTING AND PRIOR TO CHARGING.
<br />5.508.2.6.1 FIRST VACUUM: PULL A SYSTEM VACUUM DOWN TO AT LEAST 1000 MICRONS (+/- 50 MICRONS), AND HOLD FOR 30 MINUTES.
<br />5.508.2.6.2 SECOND VACUUM: PULL A SECOND SYSTEM VACUUM TO A MINIMUM OF 500 MICRONS AND HOLD FOR 30 MINUTES.
<br />5.508.2.6.3 THIRD VACUUM: PULL A THIRD VACUUM DOWN TO A MINIMUM OF 300 MICRONS, AND HOLD FOR 24 HOURS WITH A MAXIMUM DRIFT OF
<br />100 MICRONS OVER A 24-HOUR PERIOD.
<br />PROJ. REQUIREMENT MANDATORY FEATURE OR MEASURE COMPLIANCE
<br />DIVISION 5.4 – BUILDING MAINTENANCE AND OPERATION
<br />5.410.2 COMMISSIONING BUILDINGS GRATER THAN 10,000 SQUARE FEET
<br />NEW BUILDINGS 10,000 SQUARE FEET AND OVER. FOR NEW BUILDINGS 10,000 SQUARE FEET AND OVER, BUILDING COMMISSIONING
<br />SHALL BE INCLUDED IN THE DESIGN AND CONSTRUCTION PROCESSES OF THE BUILDING PROJECT TO VERIFY THAT THE BUILDING
<br />SYSTEMS AND COMPONENTS MEET THE OWNER'S OR OWNER REPRESENTATIVE'S PROJECT REQUIREMENTS. COMMISSIONING SHALL
<br />BE PERFORMED IN ACCORDANCE WITH THIS SECTION BY TRAINED PERSONNEL WITH EXPERIENCE ON PROJECTS OF COMPARABLE SIZE
<br />AND COMPLEXITY.
<br />5.410.2.1 OWNER'S OR OWNER REPRESENTATIVE'S PROJECT REQUIREMENTS (OPR)
<br />THE EXPECTATIONS AND REQUIREMENTS OF THE BUILDING APPROPRIATE TO ITS PHASE SHALL BE DOCUMENTED BEFORE THE DESIGN
<br />PHASE OF THE PROJECT BEGINS. THIS DOCUMENTATION SHALL INCLUDE THE FOLLOWING:
<br />1. ENVIRONMENTAL AND SUSTAINABILITY GOALS.
<br />2. BUILDING SUSTAINABLE GOALS.
<br />3. INDOOR ENVIRONMENTAL QUALITY REQUIREMENTS.
<br />4. PROJECT PROGRAM, INCLUDING FACILITY FUNCTIONS AND HOURS OF OPERATION, AND NEED FOR AFTER HOURS OPERATION.
<br />5. EQUIPMENT AND SYSTEMS EXPECTATIONS.
<br />6. BUILDING OCCUPANT AND OPERATION AND MAINTENANCE (O&M) PERSONNEL EXPECTATIONS.
<br />5.410.4 TESTING AND ADJUSTING. NEW BUILDINGS LESS THAN 10,000 SQUARE FEET
<br />TESTING AND ADJUSTING OF SYSTEMS SHALL BE REQUIRED FOR NEW BUILDINGS LESS THAN 10,000 SQUARE FEET OR NEW SYSTEMS
<br />TO SERVE AN ADDITION OR ALTERATION THAT CONSIST OF BUILDING ADDITIONS OF 1,000 SQUARE FEET OR GREATER, NONCOMPLIANT
<br />PLUMBING FIXTURES REPLACEMENT WITH APPROPRIATE WATER-CONSERVING PLUMBING FIXTURES, AND/OR BUILDING ALTERATIONS
<br />WITH A PERMIT VALUATION OF $200,000 OR ABOVE .
<br />DIVISION 5.5 – ENVIRONMENTAL QUALITY
<br />1. VALUES IN THIS TABLE ARE DERIVED FROM THOSE SPECIFIED BY THE CALIFORNIA AIR
<br />RESOURCES BOARD, AIR TOXICS CONTROL MEASURE FOR COMPOSITE WOOD AS
<br />TESTED IN ACCORDANCE WITH ASTM E1333. FOR ADDITIONAL INFORMATION, SEE
<br />CALIFORNIA CODE OF REGULATIONS, TITLE 17, SECTIONS 93120 THROUGH 93120.12.
<br />2. THIN MEDIUM DENSITY FIBERBOARD HAS A MAXIMUM THICKNESS OF 5 /16 INCH (8 MM).
<br />CURRENT LIMIT
<br />0.05
<br />0.05
<br />0.09
<br />0.11
<br />0.13
<br />TABLE 5.504.4.5 FORMALDEHYDE LIMITS1
<br />MAXIMUM FORMALDEHYDE EMISSIONS IN PARTS PER MILLION
<br />5.506 INDOOR AIR QUALITY
<br />5.506.1 OUTSIDE AIR DELIVERY
<br />FOR MECHANICALLY OR NATURALLY VENTILATED SPACES IN BUILDINGS, MEET THE MINIMUM REQUIREMENTS OF SECTION 120.1 (REQUIREMENTS
<br />FOR VENTILATION) OF THE CALIFORNIA ENERGY CODE, OR THE APPLICABLE LOCAL CODE, WHICHEVER IS MORE STRINGENT, AND DIVISION 1,
<br />CHAPTER 4 OF CCR, TITLE 8.
<br />5.504.1 TEMPORARY VENTILATION
<br />THE PERMANENT HVAC SYSTEM SHALL ONLY BE USED DURING CONSTRUCTION IF NECESSARY TO CONDITION THE BUILDING OR AREAS
<br />OF ADDITION OR ALTERATION WITHIN THE REQUIRED TEMPERATURE RANGE FOR MATERIAL AND EQUIPMENT INSTALLATION. IF THE
<br />HVAC SYSTEM IS USED DURING CONSTRUCTION, USE RETURN AIR FILTERS WITH A MINIMUM EFFICIENCY REPORTING VALUE (MERV) OF
<br />8, BASED ON ASHRAE 52.2-1999, OR AN AVERAGE EFFICIENCY OF 30 PERCENT BASED ON ASHRAE 52.1-1992. REPLACE ALL FILTERS
<br />IMMEDIATELY PRIOR TO OCCUPANCY, OR, IF THE BUILDING IS OCCUPIED DURING ALTERATION, AT THE CONCLUSION OF
<br />CONSTRUCTION.
<br />5.503.1 FIREPLACES
<br />5.503.1 FIREPLACES: INSTALL ONLY A DIRECT-VENT SEALED-COMBUSTION GAS OR SEALED WOOD-BURNING FIREPLACE, OR A SEALED
<br />WOOD-STOVE OR PELLET STOVE, AND REFER TO RESIDENTIAL REQUIREMENTS IN THE CALIFORNIA ENERGY CODE, TITLE 24, PART 6,
<br />SUBCHAPTER 7, SECTION 150. WOODSTOVES, PELLET STOVES AND FIREPLACES SHALL COMPLY WITH APPLICABLE LOCAL
<br />ORDINANCES.
<br />5.503.1.1 WOODSTOVES: WOODSTOVE AND PELLET STOVES SHALL COMPLY WITH US EPA NEW SOURCE PERFORMANCE STANDARDS
<br />(NSPS) EMISSION LIMITS AS APPLICABLE, AND SHALL HAVE A PERMANENT LABEL INDICATING THEY ARE CERTIFIED TO MEET THE
<br />EMISSION LIMITS.
<br />5.504.3 COVERING OF DUCT OPENINGS AND PROTECTION OF MECHANICAL EQUIPMENT DURING CONSTRUCTION
<br />AT THE TIME OF ROUGH INSTALLATION AND DURING STORAGE ON THE CONSTRUCTION SITE UNTIL FINAL STARTUP OF THE HEATING,
<br />COOLING AND VENTILATING EQUIPMENT, ALL DUCT AND OTHER RELATED AIR DISTRIBUTION COMPONENT OPENINGS SHALL BE
<br />COVERED WITH TAPE, PLASTIC, SHEETMETAL OR OTHER METHODS ACCEPTABLE TO THE ENFORCING AGENCY TO REDUCE THE
<br />AMOUNT OF DUST, WATER AND DEBRIS WHICH MAY ENTER THE SYSTEM.
<br />PROJ. REQUIREMENT MANDATORY FEATURE OR MEASURE COMPLIANCE
<br />DIVISION 5.5 – ENVIRONMENTAL QUALITY
<br />FOR I-OCCUPANCIES THAT ARE NOT REGULATED BY OSHPD OR FOR I-OCCUPANCIES AND L-OCCUPANCIES THAT ARE NOT REGULATED
<br />BY THE CALIFORNIA ENERGY CODE SECTION 100.0 SCOPE, ALL REQUIREMENTS IN SECTIONS 5.410.2 THROUGH 5.410.2.6 SHALL APPLY.
<br />NOTE: FOR ENERGY-RELATED SYSTEMS UNDER THE SCOPE (SECTION 100) OF THE CALIFORNIA ENERGY CODE, INCLUDING HEATING,
<br />VENTILATION, AIR CONDITIONING (HVAC) SYSTEMS AND CONTROLS, INDOOR LIGHTING SYSTEMS AND CONTROLS, AS WELL AS WATER
<br />HEATING SYSTEMS AND CONTROLS, REFER TO CALIFORNIA ENERGY CODE SECTION 120.8 FOR COMMISSIONING REQUIREMENTS.
<br />A REPORT OF COMMISSIONING PROCESS ACTIVITIES UNDERTAKEN THROUGH THE DESIGN AND CONSTRUCTION PHASES OF THE
<br />BUILDING PROJECT SHALL BE COMPLETED AND PROVIDED TO THE OWNER OR REPRESENTATIVE.
<br />COMMISSIONING REQUIREMENTS SHALL INCLUDE:
<br />1. OWNER'S OR OWNER REPRESENTATIVE'S PROJECT REQUIREMENTS.
<br />2. BASIS OF DESIGN.
<br />3. COMMISSIONING MEASURES SHOWN IN THE CONSTRUCTION DOCUMENTS.
<br />4. COMMISSIONING PLAN.
<br />5. FUNCTIONAL PERFORMANCE TESTING.
<br />6. DOCUMENTATION AND TRAINING.
<br />7. COMMISSIONING REPORT.
<br />EXCEPTIONS:
<br />1. UNCONDITIONED WAREHOUSES OF ANY SIZE.
<br />2. AREAS LESS THAN 10,000 SQUARE FEET USED FOR OFFICES OR OTHER CONDITIONED ACCESSORY SPACES WITHIN
<br />UNCONDITIONED WAREHOUSES.
<br />3. TENANT IMPROVEMENTS LESS THAN 10,000 SQUARE FEET
<br />4. OPEN PARKING GARAGES OF ANY SIZE, OR OPEN PARKING GARAGE AREAS, OF ANY SIZE, WITHIN A STRUCTURE.
<br />NOTE: FOR THE PURPOSES OF THIS SECTION, UNCONDITIONED SHALL MEAN A BUILDING, AREA OR ROOM WHICH DOES NOT PROVIDE
<br />HEATING AND OR AIR CONDITIONING.
<br />5.410.2.2 BASIS OF DESIGN (BOD)
<br />A WRITTEN EXPLANATION OF HOW THE DESIGN OF THE BUILDING SYSTEMS MEETS THE OPR SHALL BE COMPLETED AT THE DESIGN
<br />PHASE OF THE BUILDING PROJECT. THE BASIS OF DESIGN DOCUMENT SHALL COVER THE FOLLOWING SYSTEMS:
<br />1. RENEWABLE ENERGY SYSTEMS.
<br />2. LANDSCAPE IRRIGATION SYSTEMS.
<br />3. WATER REUSE SYSTEMS.
<br />5.410.2.3 COMMISSIONING PLAN
<br />PRIOR TO PERMIT ISSUANCE A COMMISSIONING PLAN SHALL BE COMPLETED TO DOCUMENT HOW THE PROJECT WILL BE
<br />COMMISSIONED. THE COMMISSIONING PLAN SHALL INCLUDE THE FOLLOWING:
<br />1. GENERAL PROJECT INFORMATION.
<br />2. COMMISSIONING GOALS.
<br />3. SYSTEMS TO BE COMMISSIONED. PLANS TO TEST SYSTEMS AND COMPONENTS SHALL INCLUDE:
<br />a. AN EXPLANATION OF THE ORIGINAL DESIGN INTENT.
<br />b. EQUIPMENT AND SYSTEMS TO BE TESTED, INCLUDING THE EXTENT OF TESTS.
<br />c. FUNCTIONS TO BE TESTED.
<br />d. CONDITIONS UNDER WHICH THE TEST SHALL BE PERFORMED.
<br />4. MEASURABLE CRITERIA FOR ACCEPTABLE PERFORMANCE.
<br />5. COMMISSIONING TEAM INFORMATION.
<br />6. COMMISSIONING PROCESS ACTIVITIES, SCHEDULES AND RESPONSIBILITIES. PLANS FOR THE COMPLETION OF COMMISSIONING
<br />SHALL BE INCLUDED.
<br />5.410.2.4 FUNCTIONAL PERFORMANCE TESTING
<br />FUNCTIONAL PERFORMANCE TESTS SHALL DEMONSTRATE THE CORRECT INSTALLATION AND OPERATION OF EACH COMPONENT,
<br />SYSTEM AND SYSTEM- TO-SYSTEM INTERFACE IN ACCORDANCE WITH THE APPROVED PLANS AND SPECIFICATIONS. FUNCTIONAL
<br />PERFORMANCE TESTING REPORTS SHALL CONTAIN INFORMATION ADDRESSING EACH OF THE BUILDING COMPONENTS TESTED, THE
<br />TESTING METHODS UTILIZED, AND INCLUDE ANY READINGS AND ADJUSTMENTS MADE.
<br />5.410.2.5 DOCUMENTATION AND TRAINING
<br />A SYSTEMS MANUAL AND SYSTEMS OPERATIONS TRAINING ARE REQUIRED, INCLUDING OCCUPATIONAL SAFETY AND HEALTH ACT
<br />(OSHA) REQUIREMENTS IN CALIFORNIA CODE OF REGULATIONS (CCR), TITLE 8, SECTION 5142, AND OTHER RELATED REGULATIONS.
<br />5.410.2.5.1 SYSTEMS MANUAL: DOCUMENTATION OF THE OPERATIONAL ASPECTS OF THE BUILDING SHALL BE COMPLETED WITHIN THE
<br />SYSTEMS MANUAL AND DELIVERED TO THE BUILDING OWNER OR REPRESENTATIVE. THE SYSTEMS MANUAL SHALL INCLUDE THE
<br />FOLLOWING:
<br />1. SITE INFORMATION, INCLUDING FACILITY DESCRIPTION, HISTORY AND CURRENT REQUIREMENTS.
<br />2. SITE CONTACT INFORMATION.
<br />3. BASIC OPERATIONS AND MAINTENANCE, INCLUDING GENERAL SITE OPERATING PROCEDURES, BASIC TROUBLESHOOTING,
<br />RECOMMENDED MAINTENANCE REQUIREMENTS, SITE EVENTS LOG.
<br />4. MAJOR SYSTEMS.
<br />5. SITE EQUIPMENT INVENTORY AND MAINTENANCE NOTES.
<br />6. A COPY OF VERIFICATIONS REQUIRED BY THE ENFORCING AGENCY OR THIS CODE.
<br />7. OTHER RESOURCES AND DOCUMENTATION, IF APPLICABLE.
<br />5.410.2.5.2 SYSTEMS OPERATIONS TRAINING: A PROGRAM FOR TRAINING OF THE APPROPRIATE MAINTENANCE STAFF FOR EACH
<br />EQUIPMENT TYPE AND/OR SYSTEM SHALL BE DEVELOPED AND DOCUMENTED IN THE COMMISSIONING REPORT AND SHALL INCLUDE
<br />THE FOLLOWING:
<br />1. SYSTEM/EQUIPMENT OVERVIEW (WHAT IT IS, WHAT IT DOES AND WITH WHAT OTHER SYSTEMS AND/OR EQUIPMENT IT
<br />INTERFACES).
<br />2. REVIEW AND DEMONSTRATION OF SERVICING/PREVENTIVE MAINTENANCE.
<br />3. REVIEW OF THE INFORMATION IN THE SYSTEMS MANUAL.
<br />4. REVIEW OF THE RECORD DRAWINGS ON THE SYSTEM/EQUIPMENT.
<br />5.504.4.3 PAINTS AND COATINGS
<br />ARCHITECTURAL PAINTS AND COATINGS SHALL COMPLY WITH VOC LIMITS IN TABLE 1 OF THE ARB ARCHITECTURAL COATINGS
<br />SUGGESTED CONTROL MEASURE, AS SHOWN IN TABLE 5.504.4.3, UNLESS MORE STRINGENT LOCAL LIMITS APPLY. THE VOC CONTENT
<br />LIMIT FOR COATINGS THAT DO NOT MEET THE DEFINITIONS FOR THE SPECIALTY COATINGS CATEGORIES LISTED IN TABLE 5.504.4.3
<br />SHALL BE DETERMINED BY CLASSIFYING THE COATING AS A FLAT, NONFLAT OR NONFLAT-HIGH GLOSS COATING, BASED ON ITS GLOSS,
<br />AS DEFINED IN SUBSECTIONS 4.21, 4.36 AND 4.37 OF THE 2007 CALIFORNIA AIR RESOURCES BOARD SUGGESTED CONTROL MEASURE,
<br />AND THE CORRESPONDING FLAT, NONFLAT OR NONFLAT-HIGH GLOSS VOC LIMIT IN TABLE 5.504.4.3 SHALL APPLY.
<br />5.504.4.3.1 AEROSOL PAINTS AND COATINGS: AEROSOL PAINTS AND COATINGS SHALL MEET THE PWMIR LIMITS FOR ROC IN SECTION
<br />94522(A)(3) AND OTHER REQUIREMENTS, INCLUDING PROHIBITIONS ON USE OF CERTAIN TOXIC COMPOUNDS AND OZONE DEPLETING
<br />SUBSTANCES, IN SECTIONS 94522(C)(2) AND (D)(2) OF CALIFORNIA CODE OF REGULATIONS, TITLE 17, COMMENCING WITH SECTION
<br />94520; AND IN AREAS UNDER THE JURISDICTION OF THE BAY AREA AIR QUALITY MANAGEMENT DISTRICT ADDITIONALLY COMPLY WITH
<br />THE PERCENT VOC BY WEIGHT OF PRODUCT LIMITS OF REGULATION 8 RULE 49.
<br />5.504.4.3.2 VERIFICATION: VERIFICATION OF COMPLIANCE WITH THIS SECTION SHALL BE PROVIDED AT THE REQUEST OF THE
<br />ENFORCING AGENCY. DOCUMENTATION MAY INCLUDE, BUT IS NOT LIMITED TO, THE FOLLOWING:
<br />1. MANUFACTURER'S PRODUCT SPECIFICATION
<br />2. FIELD VERIFICATION OF ON-SITE PRODUCT CONTAINERS
<br />NOTE:FOR ENERGY-RELATED SYSTEMS UNDER THE SCOPE (SECTION 100) OF THE CALIFORNIA ENERGY CODE, INCLUDING HEATING,
<br />VENTILATION, AIR CONDITIONING (HVAC) SYSTEMS AND CONTROLS, INDOOR LIGHTING SYSTEM AND CONTROLS, AS WELL AS WATER
<br />HEATING SYSTEMS AND CONTROLS, REFER TO CALIFORNIA ENERGY CODE SECTION 120.8 FOR COMMISSIONING REQUIREMENTS AND
<br />SECTIONS 120.5, 120.6, 130.4 AND 140.9(B)3 FOR ADDITIONAL TESTING REQUIREMENTS OF SPECIFIC SYSTEMS.
<br />5.410.4.2 SYSTEMS
<br />DEVELOP A WRITTEN PLAN OF PROCEDURES FOR TESTING AND ADJUSTING SYSTEMS. SYSTEMS TO BE INCLUDED FOR TESTING AND
<br />ADJUSTING SHALL INCLUDE, AS APPLICABLE TO THE PROJECT:
<br />1. RENEWABLE ENERGY SYSTEMS.
<br />2. LANDSCAPE IRRIGATION SYSTEMS.
<br />3. WATER REUSE SYSTEMS.
<br />5.410.4.3 PROCEDURES
<br />PERFORM TESTING AND ADJUSTING PROCEDURES IN ACCORDANCE WITH MANUFACTURER'S SPECIFICATIONS AND APPLICABLE
<br />STANDARDS ON EACH SYSTEM.
<br />5.410.4.4 REPORTING
<br />AFTER COMPLETION OF TESTING, ADJUSTING AND BALANCING, PROVIDE A FINAL REPORT OF TESTING SIGNED BY THE INDIVIDUAL
<br />RESPONSIBLE FOR PERFORMING THESE SERVICES.
<br />5.410.4.5 OPERATION AND MAINTENANCE (O & M) MANUAL
<br />PROVIDE THE BUILDING OWNER OR REPRESENTATIVE WITH DETAILED OPERATING AND MAINTENANCE INSTRUCTIONS AND COPIES OF
<br />GUARANTIES/WARRANTIES FOR EACH SYSTEM. O & M INSTRUCTIONS SHALL BE CONSISTENT WITH OSHA REQUIREMENTS IN CCR, TITLE
<br />8, SECTION 5142, AND OTHER RELATED REGULATIONS.
<br />5.504.5.3 FILTERS
<br />IN MECHANICALLY VENTILATED BUILDINGS, PROVIDE REGULARLY OCCUPIED AREAS OF THE BUILDING WITH AIR FILTRATION MEDIA FOR
<br />OUTSIDE AND RETURN AIR THAT PROVIDES AT LEAST A MINIMUM EFFICIENCY REPORTING VALUE (MERV) OF 13. MERV 13 FILTERS SHALL
<br />BE INSTALLED PRIOR TO OCCUPANCY, AND RECOMMENDATIONS FOR MAINTENANCE WITH FILTERS OF THE SAME VALUE SHALL BE
<br />INCLUDED IN THE OPERATION AND MAINTENANCE MANUAL.
<br />EXCEPTION:EXISTING MECHANICAL EQUIPMENT.
<br />5.504.5.3.1 LABELING: INSTALLED FILTERS SHALL BE CLEARLY LABELED BY THE MANUFACTURER INDICATING THE MERV RATING.
<br />5.504.4.7 THERMAL INSULATION
<br />COMPLY WITH THE REQUIREMENTS OF THE CALIFORNIA DEPARTMENT OF PUBLIC HEALTH, "STANDARD METHOD FOR THE TESTING AND
<br />EVALUATION OF VOLATILE ORGANIC CHEMICAL EMISSIONS FROM INDOOR SOURCES USING ENVIRONMENTAL CHAMBERS," VERSION 1.2,
<br />JANUARY 2017 (EMISSION TESTING METHOD FOR CALIFORNIA SPECIFICATION 01350).
<br />SEE CALIFORNIA DEPARTMENT OF PUBLIC HEALTH'S WEBSITE FOR CERTIFICATION PROGRAMS AND TESTING LABS.
<br />5.504.4.7.1 VERIFICATION OF COMPLIANCE: DOCUMENTATION SHALL BE PROVIDED VERIFYING THAT THERMAL INSULATION MATERIALS
<br />MEET THE POLLUTANT EMISSION LIMITS.
<br />5.504.4.8 ACOUSTICAL CEILINGS AND WALL PANELS
<br />COMPLY WITH THE REQUIREMENTS OF THE CALIFORNIA DEPARTMENT OF PUBLIC HEALTH, "STANDARD METHOD FOR THE TESTING AND
<br />EVALUATION OF VOLATILE ORGANIC CHEMICAL EMISSIONS FROM INDOOR SOURCES USING ENVIRONMENTAL CHAMBERS," VERSION 1.2,
<br />JANUARY 2017 (EMISSION TESTING METHOD FOR CALIFORNIA SPECIFICATION 01350).
<br />SEE CALIFORNIA DEPARTMENT OF PUBLIC HEALTH'S WEBSITE FOR CERTIFICATION PROGRAMS AND TESTING LABS.
<br />5.504.4.8.1 VERIFICATION OF COMPLIANCE: DOCUMENTATION SHALL BE PROVIDED VERIFYING THAT ACOUSTICAL FINISH MATERIALS
<br />MEET THE POLLUTANT EMISSION LIMITS.
<br />5.507.4 ACOUSTICAL CONTROL
<br />EMPLOY BUILDING ASSEMBLIES AND COMPONENTS WITH SOUND TRANSMISSION CLASS (STC) VALUES DETERMINED IN ACCORDANCE WITH ASTM E90
<br />AND ASTM E413 OR OUTDOOR-INDOOR SOUND TRANSMISSION CLASS (OITC) DETERMINED IN ACCORDANCE WITH ASTM E1332, USING EITHER THE
<br />PRESCRIPTIVE OR PERFORMANCE METHOD
<br />EXCEPTION: BUILDINGS WITH FEW OR NO OCCUPANTS OR WHERE OCCUPANTS ARE NOT LIKELY TO BE AFFECTED BY EXTERIOR NOISE, AS
<br />DETERMINED BY THE ENFORCEMENT AUTHORITY, SUCH AS FACTORIES, STADIUMS, STORAGE, ENCLOSED PARKING STRUCTURES AND UTILITY
<br />BUILDINGS.
<br />5.507.4.1 EXTERIOR NOISE TRANSMISSION, PRESCRIPTIVE METHOD
<br />WALL AND ROOF-CEILING ASSEMBLIES EXPOSED TO THE NOISE SOURCE MAKING UP THE BUILDING OR ADDITION ENVELOPE OR ALTERED ENVELOPE
<br />SHALL MEET A COMPOSITE STC RATING OF AT LEAST 50 OR A COMPOSITE OITC RATING OF NO LESS THAN 40, WITH EXTERIOR WINDOWS OF A
<br />MINIMUM STC OF 40 OR OITC OF 30 IN THE FOLLOWING LO CATIONS:
<br />1. WITHIN THE 65 CNEL NOISE CONTOUR OF AN AIRPORT.
<br />EXCEPTIONS:
<br />a. LDN OR CNEL FOR MILITARY AIRPORTS SHALL BE DETERMINED BY THE FACILITY AIR INSTALLATION COMPATIBLE LAND USE ZONE (AICUZ)
<br />PLAN.
<br />b. LDN OR CNEL FOR OTHER AIRPORTS AND HELIPORTS FOR WHICH A LAND USE PLAN HAS NOT BEEN DEVELOPED SHALL BE DETERMINED BY
<br />THE LOCAL GENERAL PLAN NOISE ELEMENT.
<br />2. WITHIN THE 65 CNEL OR LDN NOISE CONTOUR OF A FREEWAY OR EXPRESSWAY, RAILROAD, INDUSTRIAL SOURCE OR FIXED- GUIDEWAY
<br />SOURCE AS DETERMINED BY THE NOISE ELEMENT OF THE GENERAL PLAN.
<br />5.507.4.1.1 NOISE EXPOSURE WHERE NOISE CONTOURS ARE NOT READILY AVAILABLE
<br />BUILDINGS EXPOSED TO A NOISE LEVEL OF 65 DB LEQ-1-HR DURING ANY HOUR OF OPERATION SHALL HAVE BUILDING, ADDITION OR ALTERATION
<br />EXTERIOR WALL AND ROOF-CEILING ASSEMBLIES EXPOSED TO THE NOISE SOURCE MEETING A COMPOSITE STC RATING OF AT LEAST 45 (OR OITC
<br />35), WITH EXTERIOR WINDOWS OF A MINIMUM STC OF 40 (OR OITC 30).
<br />5.507.4.2 PERFORMANCE METHOD
<br />FOR BUILDINGS LOCATED AS DEFINED IN SECTION 5.507.4.1 OR 5.507.4.1.1, WALL AND ROOF-CEILING ASSEMBLIES EXPOSED TO THE NOISE SOURCE
<br />MAKING UP THE BUILDING OR ADDITION ENVELOPE OR ALTERED ENVELOPE SHALL BE CONSTRUCTED TO PROVIDE AN INTERIOR NOISE
<br />ENVIRONMENT ATTRIBUTABLE TO EXTERIOR SOURCES THAT DOES NOT EXCEED AN HOURLY EQUIVALENT NOISE LEVEL (LEQ-1HR) OF 50 DBA IN
<br />OCCUPIED AREAS DURING ANY HOUR OF OPERATION.
<br />5.507.4.2.1 SITE FEATURES: EXTERIOR FEATURES SUCH AS SOUND WALLS OR EARTH BERMS MAY BE UTILIZED AS APPROPRIATE TO THE BUILDING,
<br />ADDITION OR ALTERATION PROJECT TO MITIGATE SOUND MIGRATION TO THE INTERIOR.
<br />5.507.4.2.2 DOCUMENTATION OF COMPLIANCE: AN ACOUSTICAL ANALYSIS DOCUMENTING COMPLYING INTERIOR SOUND LEVELS SHALL BE
<br />PREPARED BY PERSONNEL APPROVED BY THE ARCHITECT OR ENGINEER OF RECORD.
<br />PROJ. REQUIREMENT MANDATORY FEATURE OR MEASURE COMPLIANCE
<br />DIVISION 5.4 – MATERIAL CONSERVATION AND RESOURCE EFFICIENCY
<br />5.407.1 WEATHER PROTECTION
<br />PROVIDE A WEATHER-RESISTANT EXTERIOR WALL AND FOUNDATION ENVELOPE AS REQUIRED BY CALIFORNIA BUILDING CODE SECTION 1402.2
<br />(WEATHER PROTECTION), MANUFACTURER'S INSTALLATION INSTRUCTIONS OR LOCAL ORDINANCE, WHICHEVER IS MORE STRINGENT.
<br />5.407.2 MOISTURE CONTROL: EMPLOY MOISTURE CONTROL MEASURES BY THE FOLLOWING METHODS.
<br />5.407.2.1 SPRINKLERS: DESIGN AND MAINTAIN LANDSCAPE IRRIGATION SYSTEMS TO PREVENT SPRAY ON STRUCTURES.
<br />5.407.2.2 ENTRIES AND OPENINGS: DESIGN EXTERIOR ENTRIES AND/OR OPENINGS SUBJECT TO FOOT TRAFFIC OR WIND-DRIVEN RAIN TO PREVENT
<br />WATER INTRUSION INTO BUILDINGS AS FOLLOWS:
<br />5.407.2.2.1 EXTERIOR DOOR PROTECTION:
<br />PRIMARY EXTERIOR ENTRIES SHALL BE COVERED TO PREVENT WATER INTRUSION BY USING NONABSORBENT FLOOR AND WALL FINISHES WITHIN AT
<br />LEAST 2 FEET AROUND AND PERPENDICULAR TO SUCH OPENINGS PLUS AT LEAST ONE OF THE FOLLOWING:
<br />1. AN INSTALLED AWNING AT LEAST 4 FEET IN DEPTH.
<br />2. THE DOOR IS PROTECTED BY A ROOF OVERHANG AT LEAST 4 FEET IN DEPTH.
<br />3. THE DOOR IS RECESSED AT LEAST 4 FEET.
<br />4. OTHER METHODS WHICH PROVIDE EQUIVALENT PROTECTION.
<br />5.407.2.2.2 FLASHING: INSTALL FLASHINGS INTEGRATED WITH A DRAINAGE PLANE.
<br />SECTION 5.408 CONSTRUCTION WASTE REDUCTION, DISPOSAL AND RECYCLING
<br />5.408.1 CONSTRUCTION WASTE MANAGEMENT: RECYCLE AND/OR SALVAGE FOR REUSE A MINIMUM OF 65 PERCENT OF THE NONHAZARDOUS
<br />CONSTRUCTION AND DEMOLITION WASTE ; OR MEET A LOCAL CONSTRUCTION AND DEMOLITION WASTE MANAGEMENT ORDINANCE, WHICHEVER IS
<br />MORE STRINGENT.
<br />5.408.1.1 CONSTRUCTION WASTE MANAGEMENT PLAN: WHERE A LOCAL JURISDICTION DOES NOT HAVE A CONSTRUCTION AND DEMOLITION WASTE
<br />MANAGEMENT ORDINANCE THAT IS MORE STRINGENT, SUBMIT A CONSTRUCTION WASTE MANAGEMENT PLAN THAT
<br />1. IDENTIFIES THE CONSTRUCTION AND DEMOLITION WASTE MATERIALS TO BE DIVERTED FROM DISPOSAL BY EFFICIENT USAGE, RECYCLING,
<br />REUSE ON THE PROJECT OR SALVAGE FOR FUTURE USE OR SALE.
<br />2. DETERMINES IF CONSTRUCTION AND DEMOLITION WASTE MATERIALS WILL BE SORTED ON-SITE (SOURCE-SEPARATED) OR BULK MIXED (SINGLE
<br />STREAM).
<br />3. IDENTIFIES DIVERSION FACILITIES WHERE CONSTRUCTION AND DEMOLITION WASTE MATERIAL COLLECTED WILL BE TAKEN.
<br />4. SPECIFIES THAT THE AMOUNT OF CONSTRUCTION AND DEMOLITION WASTE MATERIALS DIVERTED SHALL BE CALCULATED BY WEIGHT OR
<br />VOLUME, BUT NOT BY BOTH.
<br />5.408.1.2 WASTE MANAGEMENT COMPANY: UTILIZE A WASTE MANAGEMENT COMPANY THAT CAN PROVIDE VERIFIABLE DOCUMENTATION THAT THE
<br />PERCENTAGE OF CONSTRUCTION AND DEMOLITION WASTE MATERIAL DIVERTED FROM THE LANDFILL COMPLIES WITH THIS SECTION.
<br />NOTE: THE OWNER OR CONTRACTOR SHALL MAKE THE DETERMINATION IF THE CONSTRUCTION AND DEMOLITION WASTE MATERIAL WILL BE
<br />DIVERTED BY A WASTE MANAGEMENT COMPANY.
<br />5.408.2 UNIVERSAL WASTE ADDITIONS AND ALTERATIONS
<br />ADDITIONS AND ALTERATIONS TO A BUILDING OR TENANT SPACE THAT CONSIST OF BUILDING ADDITIONS OF 1,000 SQ UARE FEET OR GREATER,
<br />NONCOMPLIANT PLUMBING FIXTURES REPLACEMENT WITH APPROPRIATE WATER-CONSERVING PLUMBING FIXTURES, AND/OR BUILDING ALTERATIONS
<br />WITH A PERMIT VALUATION OF $200,000 OR ABOVE SHALL REQUIRE VERIFICATION THAT UNIVERSAL WASTE ITEMS SUCH AS FLUORESCENT LAMPS AND
<br />BALLAST AND MERCURY CONTAINING THERMOSTATS AS WELL AS OTHER CALIFORNIA PROHIBITED UNIVERSAL WASTE MATERIALS ARE DISPOSED OF
<br />PROPERLY AND ARE DIVERTED FROM LANDFILLS. A LIST OF PROHIBITED UNIVERSAL WASTE MATERIALS SHALL BE INCLUDED IN THE CONSTRUCTION
<br />DOCUMENTS.
<br />EXCEPTIONS TO SECTIONS 5.408.1.1 AND 5.408.1.2:
<br />1. EXCAVATED SOIL AND LAND-CLEARING DEBRIS.
<br />2. ALTERNATE WASTE REDUCTION METHODS DEVELOPED BY WORKING WITH LOCAL AGENCIES IF DIVERSION OR RECYCLE FACILITIES CAPABLE OF
<br />COMPLIANCE WITH THIS ITEM DO NOT EXIST.
<br />3. DEMOLITION WASTE MEETING LOCAL ORDINANCE OR CALCULATED IN CONSIDERATION OF LOCAL RECYCLING FACILITIES AND MARKETS.
<br />5.408.1.3 WASTE STREAM REDUCTION ALTERNATIVE: THE COMBINED WEIGHT OF NEW CONSTRUCTION DISPOSAL THAT DOES NOT EXCEED TWO
<br />POUNDS PER SQUARE FOOT OF BUILDING AREA MAY BE DEEMED TO MEET THE 65 PERCENT MINIMUM REQUIREMENT AS APPROVED BY THE
<br />ENFORCING AGENCY.
<br />5.408.1.4 DOCUMENTATION: DOCUMENTATION SHALL BE PROVIDED TO THE ENFORCING AGENCY WHICH DEMONSTRATES COMPLIANCE WITH
<br />SECTIONS 5.408.1.1 THROUGH 5.408.1.3. THE WASTE MANAGEMENT PLAN SHALL BE UPDATED AS NECESSARY AND SHALL BE ACCESSIBLE DURING
<br />CONSTRUCTION FOR EXAMINATION BY THE ENFORCING AGENCY.
<br />NOTES:
<br />1. SAMPLE FORMS FOUND IN "A GUIDE TO THE CALIFORNIA GREEN BUILDING STANDARDS CODE (NONRESIDENTIAL) MAY BE USED TO ASSIST IN
<br />DOCUMENTING COMPLIANCE WITH THE WASTE MANAGEMENT PLAN.
<br />2. MIXED CONSTRUCTION AND DEMOLITION DEBRIS (C&D) PROCESSORS CAN BE LOCATED AT THE CALIFORNIA DEPARTMENT OF RESOURCES
<br />RECYCLING AND RECOVERY (CALRECYCLE).
<br />NOTE:REFER TO THE UNIVERSAL WASTE RULE LINK AT THE DEPARTMENT OF TOXIC SUBSTANCE CONTROL WEB SITEHTTPS://DTSC.CA.GOV/
<br />5.408.3 EXCAVATED SOIL AND LAND CLEARING DEBRIS
<br />100 PERCENT OF TREES, STUMPS, ROCKS AND ASSOCIATED VEGETATION AND SOILS RESULTING PRIMARILY FROM LAND CLEARING SHALL BE REUSED
<br />OR RECYCLED. FOR A PHASED PROJECT, SUCH MATERIAL MAY BE STOCKPILED ON SITE UNTIL THE STORAGE SITE IS DEVELOPED. EXCEPTION: REUSE,
<br />EITHER ON-OR OFF-SITE, OF VEGETATION OR SOIL CONTAMINATED BY DISEASE OR PEST INFESTATION.
<br />NOTES:IF CONTAMINATION BY DISEASE OR PEST INFESTATION IS SUSPECTED, CONTACT THE COUNTY AGRICULTURAL COMMISSIONER AND FOLLOW
<br />ITS DIRECTION FOR RECYCLING OR DISPOSAL OF THE MATERIAL. FOR A MAP OF KNOWN PEST AND/OR DISEASE QUARANTINE ZONES, CONSULT WITH
<br />THE CALIFORNIA DEPARTMENT OF FOOD AND AGRICULTURE. (WWW.CDFA.CA.GOV)
<br />REN. 4/30/25
<br />No. C-11043
<br />RICHARD S.YEN
<br />STATE OF CALIFORNIA
<br />REGISTERED ARCHITEC
<br />T
<br />2024-06-11
<br />1327 S Grand Ave
<br />12/12/2024
|