|
FINISHMARK
<br />DOOR
<br />TYPE MATERIAL THKSIZE FINISHMATERIAL
<br />HARDWARE
<br />SET
<br />FRAME REMARKS
<br />1. DOOR TO HAVE A SIGN THAT READS "DOOR TO REMAIN UNLOCKED WHILE BUILDING IS OCCUPIED".
<br />2. ALL EXIT DOORS TO HAVE PANIC HARDWARE AND PUSH BAR LOCATED, GC SUPPLIED AND INSTALLED.
<br />3. ALL EXIT DOORS TO BE OPENABLE FROM THE INSIDE WITHOUT USE OF A KEY OR ANY SPECIAL KNOWLEDGE OR EFFORT.
<br />4. DOOR TO BE TIGHT-FITTING
<br />5. DOOR / RESTROOMS SHALL BE PROVIDED WITH SELF-CLOSER AND TIGHT FITTING DOORS.
<br />6. GC TO SUBMIT SHOP DRAWINGS FOR REVIEW PRIOR TO PURCHASE & INSTALLATION OF ALL DOORS
<br />7. DOOR OPERABLE WITH 5LB. FORCE, EXCEPT FIRE DOORS WHICH IS 15LBS.
<br />8. VERIFY EXISTING DOOR SWING (SEE PLAN) - GC TO PROVIDE NEW DOOR, FRAME AND HARDWARE IF EXISTING DOOR CANNOT BE UP-GRADED
<br />9. ALL DOORS ARE EQUIPPED WITH SINGLE-EFFORT, NON-GRASP HARDWARE CENTERED BETWEEN 30" AND 44" ABOVE THE FLOOR.
<br />DOOR TYPES
<br />DOOR SCHEDULE
<br />101
<br />DOOR/FRAME SCHEDULE NOTES:
<br />DOUBLE ENTRY DOOR
<br />1
<br />33
<br />"
<br />-
<br />4
<br />0
<br />"
<br />MA
<br />X
<br />ALUMINUM
<br />10
<br />"
<br />6'
<br />-
<br />8
<br />"
<br />
<br />M
<br />I
<br />N
<br />
<br />-
<br />
<br />V
<br />E
<br />R
<br />I
<br />F
<br />Y
<br />3'-0"
<br />FULLY
<br />TEMPERED
<br />GLASS
<br />AS SCHEDULED
<br />DARK BRONZE11 3/4"HOLLOW METAL DARK BRONZE A3'-0 x 7'-0"EXISTING DOOR - SEE NOTES 1,2,3,6,7,8 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANT
<br />STOREFRONT
<br />SILLMARK
<br />WINDOW
<br />TYPE THKHEIGHT FINISHMATERIAL
<br />FRAME REMARKS
<br />WINDOW SCHEDULE
<br />A 1"ANODIZED AL DARK BRONZE8'-4"
<br />1"
<br />1"B
<br />C
<br />TYPE B (E) FIXED
<br />NO CHANGES
<br />TYPE C
<br />WIDTH
<br />20'-10"
<br />GLASS VALUE
<br />NO CHANGES TO EXISTING, TEMPERED GLASS
<br />GLAZING NOTES:
<br />1. EACH PANE OF SAFETY GLAZING INSTALLED IN HAZARDOUS LOCATIONS SHALL BE IDENTIFIED BY A MANUFACTURERS DESIGNATION SPECIFYING WHO APPLIED THE
<br />DESIGNATION, THE MANUFACTURER OR INSTALLER AND THE SAFETY GLAZING STANDARD. THE FOLLOWING SHALL BE CONSIDERED SPECIFIC HAZARDOUS LOCATIONS FOR
<br />THE PURPOSE OF SAFETY GLAZING.
<br />GLAZING IN: A. SWING DOORS
<br /> B. FIXED AND SLIDING PANELS OF SLIDING DOOR ASSEMBLIES AND PANELS IN SLIDING AND BI-FOLD CLOSET DOOR ASSEMBLIES.
<br />2. FIXED OR OPERABLE PANEL TO MEET THE FOLLOWING CONDITION :
<br />A. EXPOSED AREA OF AN INDIVIDUAL PANE GREATER THAN 9 SQUARE FEET(0.84M²)
<br />B. EXPOSED BOTTOM EDGE LESS THAN 18 INCHES (475MM) ABOVE THE FLOOR.
<br />20'-0"
<br />SINGLE ENTRY DOOR
<br />1A
<br />PANIC HARDWARE
<br />33
<br />"
<br />-
<br />4
<br />0
<br />"
<br />MA
<br />X
<br />ALUMINUM
<br />10
<br />"
<br />6'
<br />-
<br />8
<br />"
<br />
<br />M
<br />I
<br />N
<br />
<br />-
<br />
<br />V
<br />E
<br />R
<br />I
<br />F
<br />Y
<br />3'-0"
<br />FULLY
<br />TEMPERED
<br />GLASS
<br />2
<br /> EXTERIOR
<br />HOLLOW METAL-PAINT
<br />3'-0"
<br />6'
<br />-
<br />8
<br />"
<br />
<br />M
<br />I
<br />N
<br />
<br />-
<br />
<br />V
<br />E
<br />R
<br />I
<br />F
<br />Y
<br />PANIC
<br />HARDWARE
<br />33
<br />"
<br />-
<br />4
<br />0
<br />"
<br />MA
<br />X
<br />4
<br />7'
<br />-
<br />0
<br />"
<br />AS SCHEDULED
<br />33
<br />"
<br />-
<br />4
<br />0
<br />"
<br />MA
<br />X
<br /> SOLID CORE
<br /> WOOD-PAINTED
<br />HARDWARE NOTES:
<br />1. GC TO SUBMIT SHOP DRAWINGS FOR REVIEW PRIOR TO PURCHASE & INSTALLATION OF ALL DOORS AND HARDWARE
<br />2. VERIFY EXISTING DOOR TO RECEIVE NEW PANIC HARDWARE - GC TO PROVIDE NEW DOOR, HARDWARE AND FRAME IF UNABLE TO RETROFIT EXISTING DOOR
<br />3. REVERSE DOOR SWING AS SHOWN ON PLAN - GC TO PROVIDE NEW DOOR, HARDWARE AND FRAME IF UNABLE TO REVERSE SWING
<br />4. GC TO PROVIDE SHOP DRAWINGS TO ARCHITECT FOR REVIEW PRIOR TO PURCHASE / INSTALLATION
<br />5. LOCK TO BE KEYED FROM THE EGRESS SIDE AND TO BE READILY DISTINGUISHABLE AS LOCKED.
<br />AUTO FLUSH BOLT
<br />EXISTING TO REMAIN - FINISH TO BE ANODIZED DARK BRONZE ALUMINUM
<br />FINISH
<br />VON DUPRIN, TOUCHBAR SERIES 98
<br />DORMA, MODEL 7400 SERIES -
<br />HAGER, MODEL AB750 - 4 1/2 X 4 1/2
<br />TYPE 1/1A - 1 3/4" ALUMINUM STOREFRONT DOOR(S) AND FRAME
<br />MANUFACTURER & MODEL NO.
<br />STOREFRONT DOOR(S) - SET A
<br />ITEMQTY
<br />1
<br />PANIC HARDWARE
<br />CLOSER
<br />HINGES
<br />STOREFRONT DOOR AND FRAME
<br />1
<br />1
<br />1 1/2 PR
<br />1
<br />THRESHOLD1 PEMKO
<br />FINISHMANUFACTURER & MODEL NO.
<br />INTERIOR SLAB DOOR - SET B
<br />ITEMQTY
<br />HARDWARE NOTES:
<br />1. GC TO SUBMIT SHOP DRAWINGS FOR REVIEW PRIOR TO PURCHASE & INSTALLATION OF ALL DOORS AND HARDWARE
<br />FINISH
<br />DORMA, MODEL 7400 SERIES
<br />HAGER, MODEL AB750 - 4 1/2 X 4 1/2
<br />WROUGHT IRON FRAME W/ STOP
<br />MANUFACTURER & MODEL NO.
<br />PATIO DOOR - SET D
<br />ITEMQTY
<br />1
<br />1
<br />CLOSER
<br />HINGES
<br />FRAME
<br />DOOR (3'-0" X 7'-0")
<br />1
<br />1 1/2 PR
<br />HARDWARE NOTES:
<br />1. GC TO SUBMIT SHOP DRAWINGS FOR REVIEW PRIOR TO PURCHASE & INSTALLATION OF ALL DOORS AND HARDWARE
<br />KEYHOLE
<br />1 STAINLESS STEEL
<br />SATIN CHROME
<br />STAINLESS STEEL
<br />ALUMINUM
<br />FACTORY FINISH BLACK
<br />FACTORY FINISH BLACK
<br />US32D .050- SCREW MOUNTED ON PUSH SIDE OF DOOR
<br />DON-JO, 1407-630
<br />DORMA, MODEL 7400 SERIES
<br />IVES, MODEL SR64 US26D
<br />ALUMINUM METAL FRAMES W/ STOP
<br />TYPE 4 - 1 3/4" SOLID CORE1
<br />1
<br />KICKPLATE (10" X 34")
<br />DOOR SILENCER
<br />DOOR STOP
<br />CLOSER
<br />HINGES
<br />FRAME
<br />DOOR (3'-0" X 7'-0")
<br />3
<br />1
<br />SATIN CHROMESTANLEY - 3-1/2"X3-1/2"HINGES
<br />1
<br />EXISTING TO REMAIN - NO CHANGES
<br />BLACK- MATCH EXISTING WROUGHT IRON FENCETYPE 6 - WROUGHT IRON - MATCH EXISTING
<br />FINISHED FLOOR
<br />PAIR
<br />1 PAIR
<br />AL
<br />HARDWARE SCHEDULE
<br />WINDOW TYPES
<br />8-
<br />4
<br />"
<br />
<br />-
<br />
<br />V
<br />E
<br />R
<br />I
<br />F
<br />Y
<br />6-
<br />0
<br />"
<br />
<br />-
<br />
<br />V
<br />E
<br />R
<br />I
<br />F
<br />Y
<br />VERIFY
<br /> VERIFY VERIFY6'-0"
<br />STOREFRONT -B
<br />FULLY
<br />TEMPERED
<br />GLASS
<br />TYP.
<br />MATCH EXISTING , TEMPERED GLASS ANODIZED AL
<br />ANODIZED AL
<br />1" INSULATED
<br />1" INSULATED
<br />1" INSULATED
<br />4-1/2"
<br />4-1/2"
<br />4-1/2"
<br />VON DUPRIN, TOUCHBAR SERIES 98PANIC HARDWARE1
<br />1 US32D .050- SCREW MOUNTED ON PUSH SIDE OF DOORKICKPLATE (10" X 30")
<br />STOREFRONT -C
<br />102
<br />103
<br />104
<br />3
<br />7'
<br />-
<br />0
<br />"
<br />AS SCHEDULED
<br />33
<br />"
<br />-
<br />4
<br />0
<br />"
<br />MA
<br />X
<br />20
<br />"
<br />4
<br />1
<br />/
<br />2
<br />"
<br />8"8"20"
<br /> INTERIOR / EXTERIOR
<br />HOLLOW METAL-PAINT
<br />W/ FREE AIR LOUVER
<br />AT BOTTOM
<br />105 110
<br />111
<br />112
<br />DARK BRONZE11 3/4"HOLLOW METAL DARK BRONZE A3'-0 x 7'-0"SEE NOTES 1,2,3,6,7,8 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANT
<br />STOREFRONT PAIR
<br />AL
<br />DARK BRONZE1A1 3/4"HOLLOW METAL DARK BRONZE A3'-0 x 7'-0"SEE NOTES 1,2,3,6,7,8 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANT
<br />STOREFRONT
<br />AL
<br />DARK BRONZE1A1 3/4"HOLLOW METAL DARK BRONZE A3'-0 x 7'-0"SEE NOTES 1,2,3,6,7,8 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANT
<br />STOREFRONT
<br />AL
<br />FINISHMANUFACTURER & MODEL NO.
<br />INTERIOR SLAB DOOR - SET C
<br />ITEMQTY
<br />HARDWARE NOTES:
<br />1. GC TO SUBMIT SHOP DRAWINGS FOR REVIEW PRIOR TO PURCHASE & INSTALLATION OF ALL DOORS AND HARDWARE
<br />1 STAINLESS STEEL
<br />SATIN CHROME
<br />STAINLESS STEEL
<br />ALUMINUM
<br />MATCH EXISTING
<br />MATCH EXISTING
<br />US32D .050- SCREW MOUNTED ON PUSH SIDE OF DOOR
<br />DON-JO, 1407-630
<br />DORMA, MODEL 7400 SERIES
<br />IVES, MODEL SR64 US26D
<br />ALUMINUM METAL FRAMES W/ STOP
<br />TYPE 5 - 1 3/4" SOLID CORE1
<br />1
<br />KICKPLATE (10" X 34")
<br />DOOR SILENCER
<br />DOOR STOP
<br />CLOSER
<br />HINGES
<br />FRAME
<br />DOOR (3'-0" X 7'-0")
<br />3
<br />1
<br />1
<br />SATIN CHROMESTANLEY - 3-1/2"X3-1/2"HINGES
<br />1
<br />PUSH & PULL UNITS STAINLESS STEEL
<br />1 PAIR
<br />4X16 PLATE
<br />5
<br />7'
<br />-
<br />0
<br />"
<br />AS SCHEDULED
<br />33
<br />"
<br />-
<br />4
<br />0
<br />"
<br />MA
<br />X
<br /> SOLID CORE
<br /> WOOD-PAINTED
<br />(NEW)
<br />6
<br /> PATIO GATE
<br />DOOR
<br />(NEW)
<br />PANIC HARDWARE
<br />(AT PATIO SIDE ONLY)
<br />KICK PLATE
<br />PUSH/PULL
<br />UNIT
<br />33
<br />"
<br />-
<br />4
<br />0
<br />"
<br />MA
<br />X
<br />WROUGHT IRON DOOR
<br />TO MATCH EXISTING
<br />WROUGHT IRON FENCE
<br />116
<br />117
<br />118
<br />119
<br />120
<br />121
<br />SCHLAGE, MODEL AL50PD- SATURN LEVER- 626 FINISH WITH, PRIVACY LOCK1LOCKSET SATIN CHROME
<br />4 1 3/4"3'-0 x 7'-0"BSEMIGLOSS PAINT HOLLOW METAL SEE NOTES 4,5,6,7 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANTSOLID CORE
<br />5 1 3/4"3'-0 x 7'-0"CSEMIGLOSS PAINT HOLLOW METAL SEE NOTES 4,5,6,7 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANTSOLID CORE
<br />5 1 3/4"3'-0 x 7'-0"CSEMIGLOSS PAINT HOLLOW METAL SEE NOTES 4,5,6,7 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANTSOLID CORE
<br />BLACK- MATCH EXISTING WROUGHT IRON FENCE
<br />SATIN CHROME
<br />SATIN CHROME
<br />SATIN CHROME
<br />ALUMINUM
<br />SATIN CHROME
<br />STAINLESS STEEL
<br />ALUMINUM
<br />STAINLESS STEELDON-JO, 1407-630DOOR STOP1
<br />3 1 3/4"3'-0 x 7'-0"BSEMIGLOSS PAINT HOLLOW METAL SEE NOTES 4,6,7 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANTSOLID CORE
<br />4 1 3/4"3'-0 x 7'-0"BSEMIGLOSS PAINT HOLLOW METAL SEE NOTES 4,6,7 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANTSOLID CORE
<br />4 1 3/4"3'-0 x 7'-0"BSEMIGLOSS PAINT HOLLOW METAL SEE NOTES 4,6,7 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANTSOLID CORE
<br />6 1 3/4"3'-0 x 7'-0"DMATCH EXISTING HOLLOW METALWROUGHT IRON MATCH EXISTING NEW DOOR - SEE NOTES 1,2,3,6,7,8 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANT
<br />TO NOT USED
<br />113 115TO NOT USED
<br />201
<br />202
<br />203
<br />4 1 3/4"3'-0 x 7'-0"BSEMIGLOSS PAINT HOLLOW METAL SEE NOTES 4,5, 6,7 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANTSOLID CORE
<br />- PRIVACY LATCH AT SINGLE USE RESTROOMS
<br />DARK BRONZE11 3/4"HOLLOW METAL DARK BRONZE A3'-0 x 7'-0"NEW DOOR - SEE NOTES 1,2,3,6,7,8 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANT
<br />STOREFRONT PAIR
<br />AL
<br />4 1 3/4"3'-0 x 7'-0"BSEMIGLOSS PAINT HOLLOW METAL SEE NOTES 4,6,7 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANTSOLID CORE
<br />204 208TO NOT USED
<br />209 4 1 3/4"3'-0 x 7'-0"BSEMIGLOSS PAINT HOLLOW METAL SEE NOTES 4,6,7 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANTSOLID CORE
<br />MATCH EXISTING
<br />MATCH EXISTING
<br />MATCH EXISTING
<br />MATCH EXISTING
<br />MATCH EXISTING
<br />MATCH EXISTING
<br />MATCH EXISTING
<br />MATCH EXISTING
<br />MATCH EXISTING
<br />210 4 1 3/4"3'-0 x 7'-0"BSEMIGLOSS PAINT HOLLOW METAL SEE NOTES 4,6,7 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANTSOLID CORE MATCH EXISTING
<br />212 4 1 3/4"3'-0 x 7'-0"BSEMIGLOSS PAINT HOLLOW METAL SEE NOTES 4,6,7 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANTSOLID CORE MATCH EXISTING
<br />213 4 1 3/4"3'-0 x 7'-0"BSEMIGLOSS PAINT HOLLOW METAL SEE NOTES 4,6,7 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANTSOLID CORE MATCH EXISTING
<br />214 4 1 3/4"3'-0 x 7'-0"BSEMIGLOSS PAINT HOLLOW METAL SEE NOTES 4,6,7 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANTSOLID CORE MATCH EXISTING
<br />8'
<br />-
<br />4
<br />"
<br />
<br />-
<br />
<br />V
<br />E
<br />R
<br />I
<br />F
<br />Y
<br />6'
<br />-
<br />0
<br />"
<br />
<br />-
<br />
<br />V
<br />E
<br />R
<br />I
<br />F
<br />Y
<br />VERIFY
<br /> VERIFY VERIFY6'-0"
<br />STOREFRONT -A
<br />5 1 3/4"3'-0 x 7'-0"CSEMIGLOSS PAINT HOLLOW METAL SEE NOTES 4,5,6,7 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANTSOLID CORE
<br />5 1 3/4"3'-0 x 7'-0"CSEMIGLOSS PAINT HOLLOW METAL SEE NOTES 4,5,6,7 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANTSOLID CORE
<br />MATCH EXISTING
<br />MATCH EXISTING
<br />215
<br />216
<br />DARK BRONZE11 3/4"HOLLOW METAL DARK BRONZE A3'-0 x 7'-0"SEE NOTES 1,2,3,6,7,8 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANT
<br />STOREFRONT PAIR
<br />AL217
<br />FULLY
<br />TEMPERED
<br />GLASS
<br />TYP.
<br />8'
<br />-
<br />4
<br />"
<br />
<br />-
<br />
<br />V
<br />E
<br />R
<br />I
<br />F
<br />Y
<br />6'
<br />-
<br />0
<br />"
<br />
<br />-
<br />
<br />V
<br />E
<br />R
<br />I
<br />F
<br />Y
<br />FULLY
<br />TEMPERED
<br />GLASS
<br />TYP.
<br />KEYCARD
<br />ENTRY
<br />KEYCARD
<br />ENTRY
<br />VERIFY
<br />DARK BRONZE
<br />DARK BRONZE
<br />VERIFY
<br />VERIFY
<br />8'-4"
<br />VERIFY
<br />20'-0"
<br />VERIFY
<br />8'-4"
<br />VERIFY
<br />MATCH EXISTING , TEMPERED GLASS
<br />(N) FIXED
<br />TYPE A
<br />(N) FIXED
<br />4 1 3/4"3'-0 x 7'-0"SEMIGLOSS PAINT HOLLOW METALSOLID CORE MATCH EXISTING B SEE NOTES 4,6,7 AND 9 VERIFY ALL HARDWARE TO BE ADA COMPLIANT
<br />A5-01
<br />DOOR, WINDOW &
<br />STOREFRONT
<br />SCHEDULES
<br />CLIENT:
<br />SUBMITTAL
<br />al
<br />l
<br />
<br />i
<br />d
<br />e
<br />a
<br />s
<br />,
<br />
<br />d
<br />e
<br />s
<br />i
<br />g
<br />n
<br />s
<br />
<br />a
<br />n
<br />d
<br />
<br />p
<br />l
<br />a
<br />n
<br />s
<br />
<br />r
<br />e
<br />p
<br />r
<br />e
<br />s
<br />e
<br />n
<br />t
<br />e
<br />d
<br />
<br />b
<br />y
<br />
<br />t
<br />h
<br />i
<br />s
<br />
<br />d
<br />r
<br />a
<br />w
<br />i
<br />n
<br />g
<br />
<br />a
<br />r
<br />e
<br />
<br />t
<br />h
<br />e
<br />
<br />e
<br />x
<br />c
<br />l
<br />u
<br />s
<br />i
<br />v
<br />e
<br />
<br />p
<br />r
<br />o
<br />p
<br />e
<br />r
<br />t
<br />y
<br />
<br />o
<br />f
<br />
<br />B
<br />S
<br />B
<br />
<br />d
<br />e
<br />s
<br />i
<br />g
<br />n
<br />,
<br />
<br />i
<br />n
<br />c
<br />.
<br />
<br />a
<br />n
<br />d
<br />
<br />s
<br />h
<br />a
<br />l
<br />l
<br />
<br />n
<br />o
<br />t
<br />
<br />b
<br />e
<br />
<br />r
<br />e
<br />p
<br />r
<br />o
<br />d
<br />u
<br />c
<br />e
<br />d
<br />
<br />i
<br />n
<br />
<br />w
<br />h
<br />o
<br />l
<br />e
<br />
<br />o
<br />r
<br />
<br />i
<br />n
<br />
<br />p
<br />a
<br />r
<br />t
<br />
<br />w
<br />i
<br />t
<br />h
<br />o
<br />u
<br />t
<br />
<br />t
<br />h
<br />e
<br />
<br />e
<br />x
<br />p
<br />r
<br />e
<br />s
<br />s
<br />
<br />p
<br />r
<br />i
<br />o
<br />r
<br />
<br />w
<br />r
<br />i
<br />t
<br />t
<br />e
<br />n
<br />
<br />p
<br />e
<br />r
<br />m
<br />i
<br />s
<br />s
<br />i
<br />o
<br />n
<br />
<br />o
<br />f
<br />
<br />s
<br />a
<br />i
<br />d
<br />
<br />a
<br />r
<br />c
<br />h
<br />i
<br />t
<br />e
<br />c
<br />t
<br />s
<br />,
<br />
<br />a
<br />n
<br />y
<br />
<br />u
<br />n
<br />a
<br />u
<br />t
<br />h
<br />o
<br />r
<br />i
<br />z
<br />e
<br />d
<br />
<br />r
<br />e
<br />u
<br />s
<br />e
<br />
<br />o
<br />f
<br />
<br />t
<br />h
<br />e
<br />s
<br />e
<br />
<br />p
<br />l
<br />a
<br />n
<br />s
<br />
<br />o
<br />t
<br />h
<br />e
<br />r
<br />
<br />t
<br />h
<br />a
<br />n
<br />
<br />f
<br />o
<br />r
<br />
<br />t
<br />h
<br />e
<br />
<br />p
<br />r
<br />o
<br />j
<br />e
<br />c
<br />t
<br />
<br />a
<br />n
<br />d
<br />
<br />l
<br />o
<br />c
<br />a
<br />t
<br />i
<br />o
<br />n
<br />
<br />s
<br />h
<br />o
<br />w
<br />n
<br />
<br />i
<br />s
<br />
<br />p
<br />r
<br />o
<br />h
<br />i
<br />b
<br />i
<br />t
<br />e
<br />d
<br />.
<br />JOB NO.
<br />DATEREVISION
<br />SHEET TITLE
<br />SHEET NO.
<br />08.08.2023PLANNING SUBMITTAL
<br />SA
<br />N
<br />T
<br />A
<br />
<br />A
<br />N
<br />A
<br />,
<br />
<br />C
<br />A
<br />
<br />9
<br />2
<br />7
<br />0
<br />5
<br />21
<br />3
<br />0
<br />
<br />E
<br />.
<br />
<br />4
<br />T
<br />H
<br />
<br />S
<br />T
<br />.
<br />
<br />#
<br />2
<br />0
<br />0
<br />OL
<br />I
<br />V
<br />E
<br />
<br />C
<br />R
<br />E
<br />S
<br />T
<br />
<br />-
<br />
<br />O
<br />F
<br />F
<br />I
<br />C
<br />E
<br />
<br />T
<br />I
<br />CM220584.00
<br />21
<br />3
<br />0
<br />
<br />E
<br />.
<br />
<br />4
<br />T
<br />H
<br />
<br />S
<br />T
<br />.
<br />SA
<br />N
<br />T
<br />A
<br />
<br />A
<br />N
<br />A
<br />,
<br />
<br />C
<br />A
<br />
<br />9
<br />2
<br />7
<br />0
<br />5
<br />CL
<br />I
<br />E
<br />N
<br />T
<br />:
<br />PR
<br />O
<br />J
<br />E
<br />C
<br />T
<br />:
<br />OL
<br />I
<br />V
<br />E
<br />
<br />C
<br />R
<br />E
<br />S
<br />T
<br />1ST PC SUBMITTAL - BUILDING
<br />1ST PLAN CHECK SUBMITTAL
<br />- BUILDING DEPT
<br />02.08.2024
<br />2130 E 4th St
<br />2/11/2025
|