|
MELAMINE CABINET INTERIOR
<br />1/4" MELAMINE BACK PANEL
<br />FACE OF WALL
<br />STRIP CABINET LIGHTING REFER REFLECTED
<br />CEILING LEGEND FOR SPEC. CONTRACTOR
<br />TO VERIFY LENGTHS IN FIELD
<br />EUROPEAN HINGES, TYP. (BLUM, MEPLA OR
<br />SOSS)
<br />FINISHED FRONT FACE, FACE FRAME EDGES
<br />AND EXPOSED SIDES
<br />PROVIDE CONTINUOUS METAL BACKING
<br />BEHIND DRYWALL
<br />3/4" MELAMINE SHELF WITH CHROME SHELF
<br />PINS IN 5MM HOLES AT 1-1/4" O.C.
<br />DOOR PULL AS SPECIFIED. SEE DETAIL
<br />5/-
<br />SE
<br />E
<br />
<br />E
<br />L
<br />E
<br />V
<br />A
<br />T
<br />I
<br />O
<br />N
<br />2"
<br />1'-3"
<br />RE
<br />F
<br />E
<br />R
<br />
<br />T
<br />O
<br />
<br />E
<br />L
<br />E
<br />V
<br />A
<br />T
<br />I
<br />O
<br />N
<br />S
<br />4"
<br />6
<br />-
<br />2'-0"
<br />MAX.
<br />REFER TO ELEVATION FOR BACK
<br />SPLASH
<br />PLASTIC LAMINATE COUNTERTOP
<br />WITH 1 1/2" FINISHED EDGE
<br />DOOR PULL AS SPECIFIED
<br />3/4" MELAMINE SHELF WITH CHROME
<br />SHELF PINS IN 5MM HOLES AT 1-1/4"
<br />O.C.
<br />FINISHED FRONT FACE, FACE FRAME
<br />EDGES AND EXPOSED SIDES
<br />1/4" MELAMINE BACK PANEL
<br />MELAMINE CABINET INTERIOR
<br />EUROPEAN HINGES, TYP. (BLUM, MEPLA
<br />OR SOSS)
<br />TOE KICK TO MATCH FINISHED FACE
<br />PER PLAN 2 1/2"
<br />4
<br />E
<br />Q
<br />U
<br />A
<br />L
<br />
<br />D
<br />R
<br />A
<br />W
<br />E
<br />R
<br />S
<br />6
<br />-
<br />2'-0"
<br />MAX.
<br />2 1/2"
<br />4"
<br />RE
<br />F
<br />E
<br />R
<br />
<br />T
<br />O
<br />
<br />E
<br />L
<br />E
<br />V
<br />A
<br />T
<br />I
<br />O
<br />N
<br />S
<br />FINISHED FRONT FACE, FACE FRAME
<br />EDGES AND EXPOSED SIDES
<br />DOOR PULL AS SPECIFIED
<br />PLASTIC LAMINATE COUNTERTOP
<br />WITH 1 1/2" FINISHED EDGE
<br />REFER TO ELEVATION FOR BACK
<br />SPLASH
<br />MELAMINE DRAWER INTERIOR
<br />5/8" MELAMINE BACK PANEL
<br />MELAMINE CABINET INTERIOR
<br />FULL EXTENSION DRAWER GLIDES (TYP.)
<br />TOE KICK TO MATCH FINISHED FACE
<br />MELAMINE CABINET INTERIOR
<br />34
<br />"
<br />
<br />A
<br />F
<br />F
<br />FINISHED COUNTERTOP OVER 3/4"
<br />SUBSTRATE COUNTERTOP WITH 1-1/2" FINISHED EDGE
<br />1/4" MELAMINE BACK PANEL
<br />TOE KICK TO MATCH FINISHED FACE
<br />DOOR PULL AS SPECIFIED
<br />FINISHED FRONT FACE, FACE FRAME
<br />EDGES AND EXPOSED SIDES
<br />INSTANT- FLOW HOT WATER. REFER TO
<br />POWER AND SIGNAL PLAN SPECIFICATION INFORMATION
<br />REFER TO ELEVATION FOR BACK SPLASH
<br />4"
<br />*CLEAR FLOOR SPACE 30"X48" COMPLYING WITH CBC 2022 SEC 11B-305.7.1
<br />IN FRONT OF SINK TO ALLOW FORWARD APPROACH
<br />6
<br />1
<br />/
<br />2
<br />"
<br />M
<br />A
<br />X
<br />SI
<br />N
<br />K
<br />
<br />D
<br />E
<br />P
<br />T
<br />H
<br />*HOT WATER/DRAIN PIPES EXPOSED UNDER SINKS SHALL BE
<br />INSULATED TO PROTECT AGAINST CONTACT; NO SHARP OR
<br />ABRASIVE SURFACES UNDER SINKS
<br />*PER CBC 2022 SECTION 606.1
<br />ACCESSIBLE SINKS
<br />27
<br />"
<br />
<br />H
<br />I
<br />G
<br />H
<br />
<br />M
<br />I
<br />N
<br />.
<br />
<br />K
<br />N
<br />E
<br />E
<br />
<br />C
<br />L
<br />E
<br />A
<br />R
<br />A
<br />N
<br />C
<br />E
<br />30
<br />"
<br />
<br />M
<br />I
<br />N
<br />.
<br />
<br />W
<br />I
<br />D
<br />E
<br />INSULATE ALL EXPOSED PIPES AND HOT SURFACES
<br />7
<br />-
<br />2'-0"
<br />MAX.
<br />GARBAGE DISPOSAL. REFER TO EQUIPMENT
<br />SPECIFICATIONS.
<br />FAUCET AND SINK; 61
<br />2" MAX SINK DEPTH, SINKS SHALL BE
<br />MOUNTED WITH COUNTER/RIM NO HIGHER THAN 34"
<br />AFF. FAUCET CONTROLS SHALL BE OPERABLE WITH ONE
<br />HAND & SHALL NOT REQUIRE TIGHT FRASPING, PINCHING
<br />OR TWISTING OF THE WRIST; REQUIRED FORCED TO
<br />ACTIVATE CONTROLS SHALL BE NOT GREATER THAN 5 LBF;
<br />APPROVED LEVER TYPE ONLY
<br />SCHEDULED PULL
<br />SCHEDULED PULL
<br />LINE OF PTN. BEYOND WHERE OCCURS
<br />TO MATCH ADJ. SURFACE
<br />1
<br />1
<br />/
<br />2
<br />"
<br />LINE OF TOE KICK AT ADJACENT CABINET
<br />P.LAMINATE BASE TO MATCH UPPER
<br />CABINET
<br />SCHEDULED FINISH DOOR FRONTS
<br />2"
<br />1/2"
<br />3/
<br />8
<br />"
<br />4"4
<br />7
<br />/
<br />8
<br />"
<br />3/
<br />4
<br />"
<br />6"
<br />1. SUBMITTALS. SEE GENERAL REQUIREMENTS SHEETS FOR SCHEDULE OF SUBMITTAL.
<br />2. W.I.C. STANDARDS. COMPLY WITH THE WOODWORK INSTITUTE OF CALIFORNIA "MANUAL OF MILLWORK", LATEST
<br />EDITION.
<br /> a) PROJECT STANDARD SHALL BE:
<br /> X CUSTOM GRADE
<br /> PREMIUM GRADE
<br /> b) FLUSH OVERLAY CONSTRUCTION IS STANDARD, U.O.N.
<br />3. SCRIBE FINISH. SCRIBE ALL CASEWORK AND MILLWORK TO ADJACENT SURFACES, U.O.N.
<br />5. CABINET HARDWARE:
<br />4. GROMMET HOLES. PROVIDE 3" DIAMETER WIRE/CORD MANAGEMENT HOLES AND PLASTIC GROMMETS WITH COVERS
<br />AT 48" ON CENTER AT ALL COUNTER TOPS. MILLWORKER'S SHOP DRAWINGS SHOW/ INDICATE THE LOCATION, SIZE AND
<br />COLOR ON NEW GROMMETS. WHERE GROMMETS PENETRATE A BASE CABINET WITH ADJUSTABLE SHELVING, THE
<br />MILLWORKER SHALL PROVIDE A 3" PLASTIC LINED OPENING IN EACH SHELF. THE MILLWORK WILL NEEDS TO VERIFY THE
<br />QUANTITY OF GROMMETS REQUIRED WITH THE DESIGNER DURING BIDDING. DESIGNER SHALL APPROVE GROMMET
<br />LOCATION WITH THE MILLWORK SHOP DRAWINGS.
<br />6. ANCHORING AND BACKING. SECURE AND ANCHOR CASEWORK PER NOTES, DETAILS 9 & 10/A-30.5
<br /> AND INDUSTRY STANDARDS. BACKING PROVIDED AND INSTALLED BY GENERAL CONTRACTOR.
<br />7. OPEN CABINETS. WHERE OPEN CABINETS ARE SHOWN, THE ENTIRE CABINET IS CONSIDERED TO BE
<br />EXPOSED SPECIFIED PLASTIC LAMINATE FINISH IS TO BE USED THROUGHOUT.
<br />8. CLOSED CABINETS INTERIOR FINISH IS TO BE WHITE "KORTON" INTERIOR SURFACES FOR CABINETS AND
<br />SHELVES, U.O.N..
<br />A) COMPLIANCE WITH STANDARDS. INSTALL FINISH HARDWARE COMPLYING WITH ANSI A156.9 "STANDARD FOR
<br />CABINET HARDWARE". SUBMITTAL. CABINET HARDWARE IS NOTED BY TYPE AND FINISH ONLY. SUBMIT LIST OF
<br />ALL ITEMS FOR APPROVAL PRIOR CONSTRUCTION.
<br />B)PROPOSE HARDWARE TO DESIGNER FOR REVIEW AND APPROVAL PRIOR TO ORDERING.
<br />C)PULL TYPE 1: 4" TAB PULL BY DOUG MOCKETT DP3B, SATIN CHROME FINISH.
<br />D)TYPICAL HINGES: CONCEALED CASEWORK HINGES, BLDG. STD. FINISH, FULL OVERLAY APPLICATION AND 110
<br />DEGREES OPENING.
<br />E)SHELVES STANDARDS: 3/4" MELAMINE SHELF WITH CHROME SHELF PINS IN 5MM HOLES AT 1-1/4" O.C.
<br />F)DRAWER GLIDES: ACCURIDE FULL EXTENSION.
<br />G)SILENCERS: PROVIDE SILENCERS AT ALL CABINET DOORS AND DRAWERS.
<br />FINISHED COUNTERTOP OVER 3/4" SUBSTRATE
<br />COUNTERTOP
<br />WITH 1 1/2" FINISHED EDGE
<br />MICROWAVE
<br />MICROWAVES REFER TO POWER AND SIGNAL
<br />PLAN SPECIFICATION INFORMATION
<br />COORDINATE POWER OUTLET W/ MILLWORK
<br />RE
<br />F
<br />E
<br />R
<br />
<br />T
<br />O
<br />
<br />E
<br />L
<br />E
<br />V
<br />A
<br />T
<br />I
<br />O
<br />N
<br />S
<br />1/4" MELAMINE BACK PANEL
<br />4"
<br />SE
<br />E
<br />
<br />S
<br />P
<br />E
<br />C
<br />I
<br />F
<br />I
<br />C
<br />A
<br />T
<br />I
<br />O
<br />N
<br />S
<br />SE
<br />E
<br />
<br />E
<br />L
<br />E
<br />V
<br />A
<br />T
<br />I
<br />O
<br />N
<br />DOOR PULL AS SPECIFIED
<br />PLASTIC LAMINATE CABINET INTERIOR
<br />FINISHED FRONT FACE, FACE FRAME
<br />EDGES AND EXPOSED SIDES
<br />1/4" MELAMINE BACK PANEL
<br />TRASH CONTAINER BY GENERAL
<br />CONTRACTOR
<br />TOE KICK TO MATCH FINISHED FACE2 1/2"
<br />3/4" PLASTIC LAMINATE SLIDE OUT
<br />TRASH CONTAINER SHELF WITH ANGLED
<br />SIDES ATTACHED TO FRONT W/ 24"
<br />DEEP FULL EXTENSION ACCURIDE GLIDES
<br />MICROWAVE
<br />SE
<br />E
<br />
<br />S
<br />P
<br />E
<br />C
<br />I
<br />F
<br />I
<br />C
<br />A
<br />T
<br />I
<br />O
<br />N
<br />S
<br />EUROPEAN HINGES, TYP. (BLUM, MEPLA OR
<br />SOSS)
<br />DOOR PULL AS SPECIFIED
<br />PROVIDE CONTINUOUS METAL BACKING
<br />BEHIND DRYWALL
<br />MICROWAVES REFER TO POWER AND SIGNAL
<br />PLAN SPECIFICATION INFORMATION
<br />COORDINATE POWER OUTLET W/ MILLWORK
<br />FINISHED COUNTERTOP OVER 3/4" SUBSTRATE
<br />COUNTERTOP
<br />WITH 1 1/2" FINISHED EDGE
<br />3/4" MELAMINE SHELF WITH
<br />CHROME SHELF PINS IN 5MM
<br />HOLES AT 1-1/4" O.C.
<br />MELAMINE CABINET INTERIOR
<br />FINISHED FRONT FACE, FACE FRAME
<br />EDGES AND EXPOSED SIDES
<br />PROJECT:
<br />DATE:
<br />DRAWN:
<br />SCALE:
<br />PROJECT NO:
<br />REVIEWED:
<br />SHEET NO:
<br />SHEET TITLE:
<br />STAMP AND SIGNATURE:
<br />CONSULTANTS:
<br />DATE DESCRIPTION DELTA
<br />DRAWINGS ISSUE
<br />02/15/2024 ISSUE FOR PLANNING APPROVAL
<br />6083 Bristol Parkway
<br />Culver City, CA 90230
<br />515 South Flower St., Suite 1200
<br />Los Angeles, CA 90071
<br />18600 MacArthur Blvd., Suite 100
<br />Irvine, CA 92612
<br />485C US Route 1 South, Suite 105
<br />Iselin, NJ 08830
<br />www.saaia.com
<br />T 310.553.3252
<br />T 213.929.1400
<br />T 949.724.8958
<br />San Francisco, CA 94105
<br />T 415.390.6793
<br />T 848.200.1200
<br />New York, NY 10017
<br />T 917.512.6688
<br />575 Market St., Suite 502
<br />711 3rd Ave., 6th Floor
<br />OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALL
<br />REMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,
<br />OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.
<br />COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED
<br />12/18/23
<br />KL/SD/AW
<br />MP
<br />634772
<br />COUNTY OF ORANGE
<br />PROBATION TRAINING & VOLUNTEER SERVICES
<br />AND YOUTH REPORT CENTER
<br />1700 E ST ANDREW PL
<br />SANTA ANA, CA 92705
<br />C U L V E R C I T Y , C A •I R V I N E , C A • L O S A N G E L E S , C A
<br />S A N F R A N C I S C O , C A • I S E L I N , N J • N E W Y O R K , N Y
<br />IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAIN
<br />RECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONS
<br />ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS AT
<br />ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ON
<br />THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGS
<br />AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS
<br />REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR
<br />COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT
<br />BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.
<br />02/22/2024 ISSUE FOR PLAN CHECK / BID
<br />02/26/2024 PLANNING COMMENTS A
<br />04/03/2024 TENANT COMMENTS / FIELD REVISIONS B
<br />AND PLAN CHECK COMMENTS 01
<br />MILLWORK DETAILS WITH TAB
<br />PULLS
<br />1
<br />2
<br />3
<br />4
<br />5
<br />6
<br />7
<br />8
<br />10
<br />12
<br />13
<br />14
<br />15
<br />16
<br />19
<br />20
<br />SCALE
<br />ACCESSIBLE SINK CABINET
<br />SCALE SCALE
<br />1"=1'-0"UPPER CABINET W/ DOOR
<br />SCALE SCALE SCALE SCALE
<br />SCALESCALE
<br />BASE CABINET W/ DOOR
<br />1"=1'-0"BASE CABINET W/ DRAWERSSCALESCALE
<br />SCALE SCALE SCALE SCALE SCALE
<br />1"=1'-0"
<br />1"=1'-0"A-30.5A
<br />AS NOTED
<br />SCALE 18
<br />SCALE 17
<br />N.T.S.MILLWORK NOTES
<br />DETAIL AT FALSE TOE KICK 1-1/2"=1'-0"
<br />DETAIL AT UPPER CABINET 1 1/2"=1'-0"
<br />DETAIL AT LOWER CABINET 1 1/2"=1'-0"
<br />1ST & 2ND FLOOR
<br />PULL OUT TRASH CABINET 1"=1'-0"
<br />SPECIFYNOT USED
<br />SPECIFYNOT USED
<br />SPECIFYNOT USED
<br />SPECIFYNOT USEDSPECIFYNOT USED
<br />SPECIFYNOT USED
<br />SPECIFYNOT USED
<br />SPECIFYNOT USED
<br />11SCALE
<br />SPECIFYNOT USED
<br />SPECIFYNOT USED
<br />NELSON
<br />ALGAZE
<br />No. C-21090
<br />REN. 03/31/2025
<br />L
<br />CENSE ARC
<br />EC
<br />SAE O CAL ORNA
<br />1700 E St Andrew Pl - 101118387,
<br />20182190, 30146952 & 40138878
<br />6/5/2024
|