Laserfiche WebLink
CITY OF SANTA ANA <br />Planning and Building Agency <br />STATE OF CALIFORNIA <br />Sign Lighting <br />Approved <br />CALIFORNIA E Ef16V_#'*"��IVAUANCE <br />CERTIFICATE OF COMPLIANCE <br />NRCC-LTS-E <br />This document is used to demonstrate compliance with requirements in 110.9, 110.12, 130.01160.5, 130.3/ 160.5(d), 140.8/ 170.2(e) and 141.0(b)2W 180.2(b)4Bvi <br />scopes using the prescriptive path. Exit signs and traffic signs are not required to comply with prescriptive requirements per exceptions to 140.81170.2(e) and do no <br />this compliance document. <br />for si n ligqhting <br />Mas r I17: <br />Date: a complete <br />a e: <br />Project Name: FRESENIUS <br />Report Page: (Page 1 of 4) <br />Project Address: 600 West Santa Ana Blvd #111, SANTA ANA, CA 92701. <br />IDate Prepared: 2025-02-28T14:17:29-05:00 <br />A. GENERAL INFORMATION <br />01 <br />Project Location (city) <br />SANTA ANA <br />02 <br />Climate Zone <br />8 <br />03 <br />Occupancy Types within Project <br />❑ <br />Healthcare Facility <br />❑ <br />I Multifamily/ MF Mixed -use >= 4 stories (includes dormitory, senior living) <br />B. PROJECT SCOPE <br />This table includes illuminated signs that are within the scope of the permit application and are demonstrating compliance using the prescriptive path outlined in 140.81170.2(e) or <br />141.0(b)2W 180.2(b)4Bvi for alterations. Exit signs and traffic signs are not required to comply with prescriptive requirements per exceptions to 140.81170.2(e) and do not need to <br />complete this compliance document. <br />01 <br />02 <br />03 <br />04 <br />05 <br />Name or Item Tag <br />Complete Sign Description <br />Sign Status' <br />Sign Type <br />Compliance Method <br />1 <br />CHANNEL LETTER WALL SIGN <br />New <br />Outdoor <br />Alternate Light Sources <br />'FOOTNOTE: Sign alterations that increase the connected lighting load, replace and rewire more that 50% of the ballasts, or relocate the sign to a different location must comply with 140.8/ 170.2(e). See <br />141.0(b)2M/ 180.2(b)4Bvi for more details. <br />2The ENERGY VERIFIED Label compliance method is only applicable if the sign has a permanent, factory -installed, ENERGY VERIFIED label certified by UL or comparable, confirming the sign complies with <br />140.8/ 170.2(e). Note that using an ENERGY VERIFIED label is an optional compliance path, not a mandatory requirement. See the tooltips for this table for more details. <br />Generated Date/Time: <br />Documentation Software: Energy Code Ace <br />CA Building Energy Efficiency Standards - 2022 Nonresidential Compliance Report Version: 2022.0.000 Compliance ID: 277549-0225-0002 <br />Schema Version: rev 20220101 Report Generated: 2025-02-2811:17:32 <br />