Laserfiche WebLink
Project Name: 5514 Rhonda Avenue, Santa Ana, California 92703 <br />Issued Date: 08/09/2024 <br />Solar Array Installation Page | 2 <br />Page #: <br />2 <br />3 <br />4 <br />5 <br />1) INTRODUCTION <br />Source <br />SEG Solar Inc. <br />SnapNrack <br />SnapNrack <br />Note: <br />1) All components are verified to withstand design criteria either based upon <br />referenced rating letters or by calculations provided in this report. <br />YUKON SERIES <br />BLACK DIAMOND <br />HALF CELL 400- <br />415W <br />Solar Panels Spec Sheet by SEG SOLAR, document <br />ID: SEG_DS_2023-02_Rev01_EN <br />SpeedSeal foot <br />(Framing Mount) <br />Roof Attachment <br />System <br />Report # 2019-13746.004 – SnapNrack <br />Ultra Rail SpeedSeal Foot Pre- <br />Production, by PZSE, Inc. - Structural <br />Engineers, dated 3/9/2020 <br />SnapNrack UR-40 Rail System <br />Report # 2017-03227.11 – Engineering <br />Certification and Span Tables for the <br />SnapNrack Ultra Rail Solar <br /> Photovoltaic Racking System, by PZSE, <br />Inc. - Structural Engineers, dated <br />2/26/2020 <br />4) CALCULATIONS <br />Table 1 – List of Solar Panel Array Components <br />Component Description Rating Letter Info <br />The solar panel array shall be installed on the existing single story residence. The structure is wood <br />framed. The roof structure is composed of 2x4 rafters spaced at 2'-0" on center. Original building drawings <br />are unavailable; however, site information was obtained during a site visit by Next Phase Electric. <br />The solar panel array is composed of components shown in Table 1. <br />3.2) Limitations <br />TABLE OF CONTENTS <br />1) INTRODUCTION <br />Table 1 – List of Solar Panel Array Components <br />2) DESIGN CRITERIA <br />3) DISCLAIMERS <br />3.1) Assumptions <br />5514 W Rhonda <br />Ave11/27/2024