Laserfiche WebLink
Equipment Release and Approval Form <br />The following tables must be completed prior to releasing the equipment for <br />fabrication/shipment. Please initial the column indicating the information contained in <br />this submittal has been verified, or indicate to refer to a marked-up page. <br />SUBMITTAL VERIFICATION <br />Purchaser Initials: <br />with jobsite requirements. <br />weights have been verified to comply with jobsite conditions <br />and rigging requirements. Please indicate approval by your <br />Important Notes: <br />1)Actual release cannot commence until this form is signed by the customer and returned to the submitter along with a release notification, want date, and ship to address. <br />2)Equipment "lead-time" does not start until confirmed release documentation is received, and the order is actually released to the factory. <br />3)Modifications to equipment configurations after release may impact cost and lead-time. <br />4)Attached configurations are as shown in the approved equipment submittals or as defined in superseding customer correspondence. <br />5)It is recommended that systems designed for operation below 14F ambient air temperature in heating mode and/or above 109F in cooling mode not exceed 100%connection ratio or total pipe length of 984ft. If exceed, the system may be at risk for reduced capacity (comfort) and/or shorter equipment lifespan. Consideration should be given to reducing connection ratio by upsizing the outdoor unit or utilizing building diversity for a true "operating" connection ratio and re-design the layout to reduce total pipe length. <br />6)"Want date" and/or "ship to address" changes made after this document is confirmed may impact cost and lead-time. <br />Project Name: WF 104497 Santa Ana, CA - Rev 1 <br />Project Number: <br />Submitter Name: Victor S Gonzalez <br />Revision: 1 <br />1/31/2023 <br />All equipment must be installed per the Installation and Maintenance Manual and local codes. <br />Information is subject to change without notice. <br />Equipment models depicted are representational only. Refer to submittal documents for specifications. <br />page 1 of 5 <br />3925 S Bristol <br />St-HVAC12/23/2024