Laserfiche WebLink
Design Results Actual @ Location Allowed Result LDF Load: Combination (Pattern) <br />Member Reaction (lbs)4949 @ 3' 11"5020 (2.25")Passed (99%)--1.0 D + 1.0 Lr (All Spans) <br />Shear (lbs)4935 @ 3' 2 1/2"7044 Passed (70%)1.25 1.0 D + 1.0 Lr (All Spans) <br />Moment (Ft-lbs)9204 @ 2' 5/8"11854 Passed (78%)1.25 1.0 D + 1.0 Lr (All Spans) <br />Live Load Defl. (in)0.051 @ 2' 5/8"0.125 Passed (L/890)--1.0 D + 1.0 Lr (All Spans) <br />Total Load Defl. (in)0.101 @ 2' 5/8"0.188 Passed (L/445)--1.0 D + 1.0 Lr (All Spans) <br />Member Length : 3' 10 1/2" <br />System : Floor <br />Member Type : Flush Beam <br />Building Use : Residential <br />Building Code : IBC 2021 <br />Design Methodology : ASD <br />•Deflection criteria: LL (L/360) and TL (L/240). <br />•Allowed moment does not reflect the adjustment for the beam stability factor. <br />• Rim Board is assumed to carry all loads applied directly above it, bypassing the member being designed. <br />Bearing Length Loads to Supports (lbs) <br />Supports Total Available Required Dead Floor Live Roof Live Factored Accessories <br />1 - Stud wall - SPF 3.50"2.25"2.20"2462 54 2444 4906 1 1/4" Rim Board <br />2 - Stud wall - SPF 3.50"2.25"2.22"2484 54 2466 4950 1 1/4" Rim Board <br />•Maximum allowable bracing intervals based on applied load. <br />Lateral Bracing Bracing Intervals Comments <br />Top Edge (Lu)3' 11" o/c <br />Bottom Edge (Lu)3' 11" o/c <br />• Side loads are assumed to not induce cross-grain tension. <br />Dead Floor Live Roof Live <br />Vertical Loads Location (Side)Tributary <br />Width <br />(0.90)(1.00)(1.25)Comments <br />0 - Self Weight (PLF)1 1/4" to 3' 11 3/4"N/A 11.5 ---- <br />1 - Uniform (PSF)0 to 4' 1" (Front)1' 3 15/16"5.0 20.0 -Default Load <br />2 - Point (lb)2' 5/8" (Front)N/A 2284 -2620 SUPPORT 2 OF <br />RB1 <br />3 - Point (lb)2' 5/8" (Front)N/A 2590 -2290 SUPPORT 1 OF <br />RB2 <br />Weyerhaeuser warrants that the sizing of its products will be in accordance with Weyerhaeuser product design criteria and published design values. Weyerhaeuser expressly disclaims any other warranties <br />related to the software. Use of this software is not intended to circumvent the need for a design professional as determined by the authority having jurisdiction. The designer of record, builder or framer is <br />responsible to assure that this calculation is compatible with the overall project. Accessories (Rim Board, Blocking Panels and Squash Blocks) are not designed by this software. Products manufactured at <br />Weyerhaeuser facilities are third-party certified to sustainable forestry standards. Weyerhaeuser Engineered Lumber Products have been evaluated by ICC-ES under evaluation reports ESR-1153 and ESR-1387 <br />and/or tested in accordance with applicable ASTM standards. For current code evaluation reports, Weyerhaeuser product literature and installation details refer to www.weyerhaeuser.com/woodproducts/ <br />document-library. <br />The product application, input design loads, dimensions and support information have been provided by LY PHAN <br />Weyerhaeuser Notes <br />Drawing is Conceptual. All locations are measured from the outside face of left support (or left cantilever end). All dimensions are horizontal (typ.). <br />MEMBER REPORT PASSED <br />Level, CB1 <br />1 piece(s) 5 1/4" x 7" 1.8E Parallam® PSL <br />ForteWEB Software Operator Job Notes 12/8/2024 5:23:57 PM UTC <br />Hai Pham <br />Gemini Design <br />(714) 707-8839 <br />hainp@uci.edu <br />ForteWEB v3.8, Engine: V8.4.1.24, Data: V8.1.6.3 <br />File Name: 2726 STRAWBERRY <br />NEW DETACHED ADU IN SANTA ANA <br />Page 8 / 12 <br />2726 W Strawberry Ln & <br />Unit# 23/17/2025