Laserfiche WebLink
www.hilti.com <br />Hilti PROFIS Engineering 3.1.1 <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c ) 2003-2024 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan <br />11 <br />Company: <br />Address: <br />Phone I Fax: <br />Design: <br />Fastening point: <br /> | <br />WIND - Concrete - Jul 23, 2024 <br />Page: <br />Specifier: <br />E-Mail: <br />Date: <br />11 <br />7/30/2024 <br />Coordinates Anchor [in.] <br />Anchor x y c-x c+x c-y c+y <br />1 -4.000 -4.000 6.000 14.000 6.000 14.000 <br />2 4.000 -4.000 14.000 6.000 6.000 14.000 <br />3 -4.000 4.000 6.000 14.000 14.000 6.000 <br />4 4.000 4.000 14.000 6.000 14.000 6.000 <br />7 Installation data <br /> Anchor type and diameter: HIT-HY 200 V3 + HAS-V-36 <br /> (ASTM F1554 Gr.36) 3/4 <br /> Profile: Round HSS (AISC), HSS1.66X.140; (L x W x T) = 1.660 in. x 1.660 in. <br /> x 0.140 in. <br /> Item number: 2198030 HAS-V-36 3/4"x10" (element) / <br /> 2334276 HIT-HY 200-R V3 (adhesive) <br /> Hole diameter in the fixture: df = 0.812 in. Maximum installation torque: 1,200 in.lb <br /> Plate thickness (input): 0.500 in. Hole diameter in the base material: 0.875 in. <br /> Recommended plate thickness: not calculated Hole depth in the base material: 6.000 in. <br /> Drilling method: Hammer drilled Minimum thickness of the base material: 7.750 in. <br /> Cleaning: Compressed air cleaning of the drilled hole according to instructions <br /> for use is required <br /> Hilti HAS threaded rod with HIT-HY 200 V3 injection mortar with 6 in embedment hef, 3/4, Carbon steel, Safe Set System, Hammer drilled <br /> installation per ESR-4868 <br />7.1 Recommended accessories <br />Drilling Cleaning Setting <br />• Suitable Rotary Hammer <br />• Properly sized drill bit <br />• Compressed air with required accessories <br /> to blow from the bottom of the hole <br />• Proper diameter wire brush <br />• Dispenser including cassette and mixer <br />• Torque wrench <br />2303 S Bristol St <br />Unit A11/13/2024