Laserfiche WebLink
22 Gage 1.5B-36 Grade 50 <br />Allowable Connection Tension (ASD) <br />Steel Deck Support Steel <br />Grade 50 A36 <br />t₁ =0.0295 in.t₂ =0.250 in. <br />Fy₁ =50 ksi Fu₂ =58 ksi <br />Fu₁ =65 ksi Weld Filler Metal <br />Fxx =60 ksi <br />Support Connection Pt Support Thickness Min. Edge Distance <br />Min Max Deck Support¹ <br />kips (in)(in)(in)(in) <br />Hilti X‑ENP19 PAF 0.567 0.250 0.266 0.500 <br />Hilti X‑HSN24 PAF 0.454 0.125 0.375 0.236 0.500 <br />Pneutek K66 PAF 0.479 0.281 0.299 0.500 <br />Pneutek K64 PAF 0.479 0.187 0.312 0.299 0.500 <br />Pneutek SDK63 PAF 0.479 0.155 0.250 0.299 0.500 <br />Pneutek SDK61 PAF 0.479 0.113 0.155 0.299 0.500 <br />Hilti S‑MD #12 Screw 0.398 0.060 0.250 0.324 0.324 <br />Simpson X #12 Screw 0.398 0.125 0.610 0.324 0.324 <br />Simpson XM #12 Screw 0.463 0.125 0.610 0.324 0.324 <br />Simpson XL #12 Screw 0.599 0.125 0.610 0.324 0.324 <br />1/4" or #14 Screw 0.460 0.015 0.500 0.375 0.375 <br />#12 Screw 0.382 0.015 0.500 0.324 0.324 <br />#10 Screw 0.368 0.015 0.175 0.285 0.285 <br />#8 Screw 0.309 0.015 0.100 0.246 0.246 <br />5/8" Visible Dia. Arc Spot Weld 0.486 0.100 0.938 0.625 <br />3/4" Visible Dia. Arc Spot Weld 0.588 0.100 1.125 0.750 <br />Arc Spot Weld with 3/8" Hole Washer 0.282 0.100 0.563 0.375 <br />Note <br />1. Minimum edged distance for: <br />PAF is 0.5 in based manufactures recommendation, <br />screws is 1.5d based on AISI S100, and <br />welds 1.0d is used to ensure adequate fit up because there is no minimum edge distance for <br />support member for arc spot welds. <br />Page 1 of 4 <br />16 of 42 <br />1801 E Dyer Rd <br />3/11/2025