Laserfiche WebLink
General Footing <br />LIC# : KW-06014993, Build:20.24.06.04 PLUMP ENGINEERING INC.(c) ENERCALC INC 1983-2023 <br />DESCRIPTION:Robot Foundation <br />Plump Engineering, Inc. <br />914 E. Katella Ave., Second Floor <br />Anaheim, CA 92805 <br />Phone: (714) 385-1835 <br />Fax: (714) 385-1834 <br />Project File: S.2406061 - Concrete Mount Pad.ec6 <br />Project Title:Behr Standard - Robot Concrete Mount Pad <br />Engineer: <br />Project ID: <br />Project Descr: <br />Code References <br />Calculations per ACI 318-19, IBC 2021, ASCE 7-16 <br />Load Combinations Used : ASCE 7-16 <br />General Information <br />Material Properties Soil Design Values <br />1.50 <br />Analysis Settings <br />100.0 <br />ksi No <br />ksfAllowable Soil Bearing = <br />= <br />4.0 <br />60.0 <br />4,030.51 <br />145.0 <br />=0.20Flexure=0.90 <br />Shear = <br />ValuesM <br />0.00090 <br />1.670 <br />Soil Passive Resistance (for Sliding) <br />1.50 <br />= <br />Increases based on footing plan dimension <br />Add Pedestal Wt for Soil Pressure No: <br />Use Pedestal wt for stability, mom & shear No: <br />Allowable pressure increase per foot of depth <br />=ksf <br />when max. length or width is greater than <br />=ft <br />: <br />= <br />Add Ftg Wt for Soil Pressure Yes <br />Yes:Use ftg wt for stability, moments & shears <br />when footing base is below ft <br />pcf Increase Bearing By Footing Weight <br />=pcf <br />Min. Overturning Safety Factor <br />= <br />: 1 <br />Increases based on footing Depth0.750 <br />= <br />Soil/Concrete Friction Coeff. <br />Ec : Concrete Elastic Modulus <br />= <br />=Footing base depth below soil surface ft <br />=Allow press. increase per foot of depth ksf <br />= <br />: 11.50Min. Sliding Safety Factor = <br />= <br />Concrete Density <br />= <br />Min Allow % Temp Reinf. <br />ksif'c : Concrete 28 day strength <br />fy : Rebar Yield ksi <br />Min Steel % Bending Reinf. <br />Soil Density =110.0 pcf <br /># <br />Dimensions <br />Width parallel to X-X Axis 9.0 ft <br />Length parallel to Z-Z Axis <br />= <br />9.0 ft <br />=Pedestal dimensions... <br />px : parallel to X-X Axis 48.0 in <br />pz : parallel to Z-Z Axis 48.0 in <br />Height == <br />48.0 in <br />Footing Thickness <br />= <br />12.0 in= <br />Rebar Centerline to Edge of Concrete... <br />=inat Bottom of footing 3.0 <br />Reinforcing <br /># <br />Bars parallel to X-X Axis <br />Reinforcing Bar Size <br />= <br />5 <br />Number of Bars <br />= <br />6.0 <br />Bars parallel to Z-Z Axis <br />Reinforcing Bar Size =5 <br />Number of Bars =6.0 <br />Bandwidth Distribution Check (ACI 15.4.4.2) <br />Direction Requiring Closer Separation <br />n/a <br /># Bars required within zone n/a <br /># Bars required on each side of zone n/a <br />Applied Loads <br />11.878 <br />D Lr <br />ksf <br />L S <br />P : Column Load <br />OB : Overburden = <br />k <br />W E <br />M-zz <br />V-x <br />= <br />=k2.430 <br />V-z k <br />M-xx = <br />k-ft=63.249 <br />k-ft <br />H <br />= <br />1995 S Standard Ave- <br />Concrete Pads10/15/2024