824 S Harbor Blvd - Plan - Laserfiche WebLink

Home Browse Search

CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 DESIGNER INFORMATION ORIGINAL BY:DATE: REVIEWED BY:DATE: REV. #BY DATE DESCRIPTION DWG TITLE:PAGE #SCALE: INDIVIDUAL PLOT PLAN NTSSPEC PAGE COMMUNITY NAME SANTA ANA 7 BUILDER ADDRESS SITE ADDRESS SANTA ANA, CA 92704 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: INSTALLATION NOTES: SOLAR CONTRACTOR - 1.ALL PV ROOF ATTACHMENTS WILL BE SPACED ALONG MODULE RACKING RAILS AT NOT GREATER THAN 48" O.C. 2.ALL PV ROOF ATTACHMENTS WILL BE STAGGERED BY ROW AMONGST THE ROOF FRAMING MEMBERS, TO MAXIMUM EXTENT POSSIBLE. 3.ROOF PENETRATIONS ASSOCIATED WITH SOLAR RACKING WILL BE SEALED WITH AN APPROVED SEALANT. 4.ROOFTOP WIRE TRANSITION WILL BE INSTALLED PER MANUFACTURER'S INSTRUCTIONS. IT WILL BE FLASHED AND SEALED. 5.PV ARRAY WILL BE A MINIMUM OF 3" ABOVE THE COMPOSITE SHINGLE ROOF SURFACE. 6.THE RACKING SYSTEM AND SOLAR PV ARRAY WILL BE INSTALLED ACCORDING TO THE MANUFACTURER'S MANUAL AND INSTALLATION GUIDES. 7.MID CLAMPS REQUIRE .37 INCH (3/8") SPACE BETWEEN PV MODULES. RAILS SHALL EXTEND 2" BEYOND ARRAY. SOLAR CONTRACTOR IS RESPONSIBLE FOR PROPER RAIL LENGTH AND INSTALLATION. 8.THE MAXIMUM HEIGHT OF A SOLAR COLLECTOR SHALL BE NO MORE THAN TWO FEET, MEASURED PERPENDICULAR TO THE ROOF SURFACE, AND MY NOT EXCEED THE MAXIMUM OVERALL BUILDING HEIGHT. 9.ALL SOLAR ENERGY SYSTEM APPURTENANCES SHALL BE SCREENED TO THE MAXIMUM EXTENT POSSIBLE WITHOUT COMPROMISING THE EFFECTIVENESS OF THE SOLAR COLLECTORS, AND SHALL BE OF A COLOR SIMILAR TO THE COLOR OF THE SURFACE UPON WITH THEY ARE MOUNTED. 10.THE ADDRESS OF EACH UNIT SHALL BE VISIBLE ON THE SITE PLAN. 11.RAIL/RACKING/MOUNTING SYSTEM HAS BEEN TESTED BASED ON UL 2703 AND CLASSIFIED AS CLASS A FIRE RATED COMPONENTS. (SEE MASTER PERMIT SET AND PROVIDED SPEC SHEETS) 10.PV PANEL HAS BEEN TESTED BASED ON UL 1703. (SEE MASTER PERMIT SET AND PROVIDED SPEC SHEETS) 11.WHERE PV DISCONNECTING MEANS (ABOVE 30 VOLTS) ARE READILY ACCESSIBLE TO UNQUALIFIED PERSONS, ANY ENCLOSURE DOOR OR HINGED COVER THAT EXPOSES LIVE PARTS WHEN OPENED, IS NOW REQUIRED TO BE LOCKED OR REQUIRE A TOOL TO OPEN PER CEC 690.13(A). STRUC 1 CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 DESIGNER INFORMATION ORIGINAL BY:DATE: REVIEWED BY:DATE: REV. #BY DATE DESCRIPTION DWG TITLE:PAGE #SCALE INDIVIDUAL PLOT PLAN SANTA ANA 7 BUILDER ADDRESS SITE ADDRESS SANTA ANA, CA 92704 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: INSTALLATION NOTES: SOLAR CONTRACTOR - 1.ALL PV ROOF ATTACHMENTS WILL BE SPACED ALONG MODULE RACKING RAILS AT NOT GREATER THAN 48" O.C. 2.ALL PV ROOF ATTACHMENTS WILL BE STAGGERED BY ROW AMONGST THE ROOF FRAMING MEMBERS, TO MAXIMUM EXTENT POSSIBLE. 3.ROOF PENETRATIONS ASSOCIATED WITH SOLAR RACKING WILL BE SEALED WITH AN APPROVED SEALANT. 4.ROOFTOP WIRE TRANSITION WILL BE INSTALLED PER MANUFACTURER'S INSTRUCTIONS. IT WILL BE FLASHED AND SEALED. 5.PV ARRAY WILL BE A MINIMUM OF 3" ABOVE THE COMPOSITE SHINGLE ROOF SURFACE. 6.THE RACKING SYSTEM AND SOLAR PV ARRAY WILL BE INSTALLED ACCORDING TO THE MANUFACTURER'S MANUAL AND INSTALLATION GUIDES. 7.MID CLAMPS REQUIRE .37 INCH (3/8") SPACE BETWEEN PV MODULES. RAILS SHALL EXTEND 2" BEYOND ARRAY. SOLAR CONTRACTOR IS RESPONSIBLE FOR PROPER RAIL LENGTH AND INSTALLATION. 8.THE MAXIMUM HEIGHT OF A SOLAR COLLECTOR SHALL BE NO MORE THAN TWO FEET, MEASURED PERPENDICULAR TO THE ROOF SURFACE, AND MY NOT EXCEED THE MAXIMUM OVERALL BUILDING HEIGHT. 9.ALL SOLAR ENERGY SYSTEM APPURTENANCES SHALL BE SCREENED TO THE MAXIMUM EXTENT POSSIBLE WITHOUT COMPROMISING THE EFFECTIVENESS OF THE SOLAR COLLECTORS, AND SHALL BE OF A COLOR SIMILAR TO THE COLOR OF THE SURFACE UPON WITH THEY ARE MOUNTED. 10.THE ADDRESS OF EACH UNIT SHALL BE VISIBLE ON THE SITE PLAN. 11.RAIL/RACKING/MOUNTING SYSTEM HAS BEEN TESTED BASED ON UL 2703 AND CLASSIFIED AS CLASS A FIRE RATED COMPONENTS. (SEE MASTER PERMIT SET AND PROVIDED SPEC SHEETS) 10.PV PANEL HAS BEEN TESTED BASED ON UL 1703. (SEE MASTER PERMIT SET AND PROVIDED SPEC SHEETS) 11.WHERE PV DISCONNECTING MEANS (ABOVE 30 VOLTS) ARE READILY ACCESSIBLE TO UNQUALIFIED PERSONS, ANY ENCLOSURE DOOR OR HINGED COVER THAT EXPOSES LIVE PARTS WHEN OPENED, IS NOW REQUIRED TO BE LOCKED OR REQUIRE A TOOL TO OPEN PER CEC 690.13(A). STRUC 1 PV MODULE (TYP.) TPO ROOF, INSTALLED BY OTHERS IRONRIDGE RAIL LOCATED UNDER PV ARRAY, (TYP.) 2 ARRAY PROFILE 1" = 1'-0" PV MODULE 2PV-S1 3 PV-S1 5 PV-E2 TPO ROOF, INSTALLED BY OTHERS IRONRIDGE TILT RACK ASSEMBLY LOCATED UNDER PV ARRAY, (TYP.) NEMA 3 TRANSITION BOX LOCATED UNDER PV ARRAY, (TYP.) RACKING EQUIPMENT SCHEDULE VENDOR PART DESCRIPTION PRO SOLAR FAST JACK E SERIES ATTACHMENT IRONRIDGE FIXED TILT LEG KIT IRONRIDGE XR10 RAILS - BLACK IRONRIDGE CAMO END CLAMPS, CAMO-01-M1 (BLACK) IRONRIDGE UFO MID CLAMPS IRONRIDGE RAIL CAPS - BLACK HARDWARE 516" x 3" LAG BOLT, SS HARDWARE FENDER WASHER, 516", CLEAR, SS 4 IRONRIDGE ASSEMBLY - ROOF CONNECTION 6" = 1'-0" 3 IRONRIDGE ASSEMBLY ON ROOF - RAIL CONNECTION 6" = 1'-0" 1 FLAT ROOF LAYOUT - TYPICAL 3/4" = 1'-0" IRONRIDGE RAIL POST STANDOFF 4 PV-S1 3 PV-S1 TPO ROOF, INSTALLED BY OTHERS POST STANDOFF PV MODULE IRONRIDGE RAIL POST STANDOFF 5 IRONRIDGE CLAMP DETAILS NTS A PV-S1 B PV-S1 5B DETAIL - MID CLAMP PLAN 2" = 1'-0" DETAIL - MID CLAMP FRONT 5A DETAIL - END CLAMP PLAN 2" = 1'-0" DETAIL - END CLAMP FRONT PV MODULE FRAME UFO MID CLAMP PV MODULE FRAME UFO MID CLAMP IRONRIDGE RAIL PV MODULE FRAME CAMO END CLAMP IRONRIDGE RAIL CAMO END CLAMP PV MODULE FRAME IRONRIDGE RAIL PV MODULE FRAME (BELOW) ANCHORS TO BE INSTALLED IN ROOF FRAMING - 2.14 INCHES MINIMUM EMBEDMENT 1' - 0 58" 2'-61516" STRUCTURAL ONLY www.vincise.com S T R U C T U R A L E N G I N E E R S 10.09.2023 824 S Harbor Blvd 11/15/2023