Laserfiche WebLink
www.hilti.com <br />Hilti PROFIS Engineering 3.0.94 <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c ) 2003-2024 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan <br />8 <br />Company: <br />Address: <br />Phone I Fax: <br />Design: <br />Fastening point: <br /> | <br />LA23642A Cabinet Anchorage <br />Page: <br />Specifier: <br />E-Mail: <br />Date: <br />8 <br />5/6/2024 <br />7 Installation data <br /> Anchor type and diameter: Kwik Bolt TZ2 - SS 304 1/2 (2 <br /> 1/2) hnom2 <br /> Profile: - Item number: 2210260 KB-TZ2 1/2x3 3/4 SS304 <br /> Hole diameter in the fixture: - Maximum installation torque: 481 in.lb <br /> Plate thickness (input): - Hole diameter in the base material: 0.500 in. <br /> Hole depth in the base material: 3.250 in. <br /> Drilling method: Hammer drilled Minimum thickness of the base material: 5.000 in. <br /> Cleaning: Manual cleaning of the drilled hole according to instructions for use is <br /> required. <br /> Hilti KB-TZ2 stud anchor with 3 in embedment, 1/2 (2 1/2) hnom2, Stainless steel, installation per ESR-4266 <br />7.1 Recommended accessories <br />Drilling Cleaning Setting <br />• Suitable Rotary Hammer <br />• Properly sized drill bit <br />• Manual blow-out pump • Torque controlled cordless impact tool <br />• Torque wrench <br />• Hammer <br />Coordinates Anchor in. <br />Anchor x y c-x c+x c-y c+y <br />1 0.000 0.000 6.000 6.000 6.000 6.000 <br />2210 3%4 N Grand Ave Unit# <br />WCC01 - 1011184045/30/2024