Laserfiche WebLink
www.hilti.com <br />Hilti PROFIS Engineering 3.0.88 <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c ) 2003-2023 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan <br />7 <br />Company: <br />Address: <br />Phone I Fax: <br />Design: <br />Fastening point: <br />Motive Energy <br />17260 Newhope St <br />7149490669 | <br />Copy - Orangewood_42_ Piles - X-X Direction_RCIII <br />Page: <br />Specifier: <br />E-Mail: <br />Date: <br />7 <br />Elie Sayegh <br />ESayegh@motive-energy.com <br />11/10/2023 <br />Coordinates Anchor [in.] <br />Anchor x y c-x c+x c-y c+y <br />1 -11.250 -6.250 9.750 32.250 14.750 27.250 <br />2 0.000 -6.250 21.000 21.000 14.750 27.250 <br />3 11.250 -6.250 32.250 9.750 14.750 27.250 <br />Anchor x y c-x c+x c-y c+y <br />4 -11.250 6.250 9.750 32.250 27.250 14.750 <br />5 0.000 6.250 21.000 21.000 27.250 14.750 <br />6 11.250 6.250 32.250 9.750 27.250 14.750 <br />7 Installation data <br /> Anchor type and diameter: Hex Head ASTM F 1554 GR. <br /> 55 1 1/2 <br /> Profile: W shape (AISC), W16X77; (L x W x T x FT) = 16.500 in. x 10.300 in. x <br /> 0.455 in. x 0.760 in. <br /> Item number: not available <br /> Hole diameter in the fixture: df = 1.562 in. Maximum installation torque: - <br /> Plate thickness (input): 1.750 in. Hole diameter in the base material: - in. <br /> Recommended plate thickness: not calculated Hole depth in the base material: 18.000 in. <br /> Minimum thickness of the base material: 19.500 in. <br /> Hilti Hex Head headed stud anchor with 18 in embedment, 1 1/2, Steel galvanized, installation per instruction for use <br />Page 24 <br />1901 N Fairview St & Bldg A, B, <br />C, F & 1919 N Fairview St Bldg E <br />4/11/2024