Laserfiche WebLink
© 2022 IRONRIDGE, INC. VERSION 3.8 FLUSH MOUNT INSTALLATION MANUAL - 4 <br />COMPON e NTS <br />BONDING HARDWARe TORQU e VALUeS <br />Please refer to each attachment's individual section for full details <br />on all torque values and instructions. <br /> ☐Universal Fastening Object (7/16" Socket): 80 in-lbs <br /> ☐Rail Grounding Lug Nut (7/16" Socket): 80 in-lbs <br /> ☐Module Grounding Lug <br /> ☐Grounding Nut (7/16" Socket): 60 in-lbs <br /> ☐Grounding Lug Terminal Screws (7/16" Socket): 20 in-lbs <br /> ☐Microinverter Kit Nuts (7/16" Socket): 80 in-lbs <br /> ☐Frameless Module Kit Nuts (7/16" Socket): 80 in-lbs <br /> ☐3/8" Bonding Hardware Nuts (7/16" Socket): 250 in-lbs <br /> ☐Contour Clamp (T-30 Torx Bit): 80 in-lbs <br /> ➢Unless otherwise noted, all components have been evaluated for <br />multiple use. They can be uninstalled and reinstalled in the same <br />or new location. <br />COMPONeNTS <br />XR Rail <br />UFO and Stopper <br />Sleeve (30-46MM)CAMO <br />Rail Grounding Lug <br />8" Bonding Jumper <br />Single Use Only <br />End Cap <br />JAYBOX <br />3/8" Bonding <br />HardwareMicroinverter Kit <br />Frameless Module KitFrameless <br />End/Mid Clamp <br />QM Classic Conduit <br />Comp Mount <br />QM Tile Conduit <br />Mount <br />PRe-INSTALLATION <br /> ☐Verify module compatibility. See Page 21 for info. <br />TOOLS Re QUIR e D <br /> ☐Cordless Drill (non-impact) <br /> ☐Impact Driver (for lag bolts) <br /> ☐Torque Wrench (0-250 in-lbs) <br /> ☐7/16” Socket <br /> ☐1/2" Socket <br /> ☐9/16" Socket <br /> ☐7/32" Drill bit <br /> ☐1/8" Drill bit <br /> ☐1/4" Drill bit <br /> ☐T30 Torx Bit <br /> ☐Channel Lock Pliers <br /> ☐#3 Phillips Bit <br /> ☐Paddle Bit <br />Ironridge L-Foot and <br />QM L-Foot <br />BOSS <br />Module Grounding <br />Lug <br />Wire Clip <br />Contour Trim Contour Clamp <br />QM Composition <br />Conduit Penetration <br />P-24 <br />1901 N Fairview St & Bldg A, B, <br />C, F & 1919 N Fairview St Bldg E <br />4/11/2024