1414 W Edinger Ave - Plan - Laserfiche WebLink

Home Browse Search

THESE PLANS ARE FOR REVIEW ONLY AND NOT FOR CONSTRUCTION UNLESS THEY INCLUDE THE STAMP AND SIGNATURE OF ARCHITECT/ENGINEER AND THE APPROVAL OF THE APPROPRIATE GOVERNMENT AGENCY C-38176 MARC A. ABDELSAYED RENEWAL DATE LICENSED A RCHITECT STATE OF C ALIFORNIA 07/31/2025 Scale Date Drawn By Checked By Project Number REVISIONS JOB SITE: PLAN: PHONE: PLAN CHECK / JOB NO. 50 S De Lacey Ave. Unit #210 Pasadena, CA 91105 (760) 673-6837 (760) 673-2550 info@369architects.com 4/ 9 / 2 0 2 5 3 : 2 4 : 4 7 P M TYP. SIGNAGE REQ. NOTES 1414 W EDINGER AVE, SANTA ANA, CA 92704 CA N A M D E N T A L SA N T A A N A Checker J.F. 03/27/25 24001 No. Description Date 1 PLAN CHECK 1 02/06/25 11B-703.3.2 Position. Braille shall be positioned below the correspoonding text in a horizontal format, flush left or centered. If text is multilined, Braille shall be place below the entire text. Braille shall be separated 3/8 inch (9.55mm) minimum and 1/2 inch (12.7 mm) maximum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements. Exception : Braille provided on elevator car controls shall be sepparated 3/16 inch ( 4.8 mm) minimum and shall be located directly below the correspondin raised characters or symbols. 11B-703.3.1 Dimensions and capitalization. Braille dots shall have domed or rounded shape and shall comply with Table 11B-703.3.1. The indication of an uppercase letter or letters shall only be used before the first word of sentences, proper nouns and names, individual letters of the alphabet, initials and acronyms. 11B-703.2 Raised Characters Raised characters shall comply with Section 11B-703.2 and shall be duplicated in Braille complying with Section 11B-703.3. Raised characters shall be installed in accordance with Section 11B-703.4. 11B-703.2.1 Depth Raised characters shall be 1/32 inch (0.8 mm) minimum above their background. 11B-703.2.2 Case Characters shall be uppercase. 11B-703.2.3 Style Characters shall be sans serif. Characters shall not be italic, oblique, script, highly decorative, or of other unusual forms. 11B-703.2.4 Character Proportions Characters shall be selected from fonts where the width of the uppercase letter "O" is 60 percent minimum and 110 percent maximum of the height of the uppercase letter "I". 11B-703.2.5 Character Height Diagram Character height measured vertically from the baseline of the character shall be 5/8 inch (15.9 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter "I". 11B-703.2.6 Stroke Thickness Stroke thickness of the uppercase letter "I" shall be 15 percent maximum of the height of the character. 11B-703.2.7 Character Spacing Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces. Where characters have rectangular cross sections, spacing between individual raised characters shall be 1/8 inch (3.2 mm) minimum and 4 times the raised character stroke width maximum. Where characters have other cross sections, spacing between individual raised characters shall be 1/16 inch (1.6 mm) minimum and 4 times the raised character stroke width maximum at the base of the cross sections, and 1/8 inch (3.2 mm) minimum and 4 times the raised character stroke width maximum at the top of the cross sections. Characters shall be separated from raised borders and decorative elements 3/8 inch (9.5 mm) minimum. 11B-703.2.8 Line Spacing Spacing between the baselines of separate lines of raised characters within a message shall be 135 percent minimum and 170 percent maximum of the raised character height. 11B-703.2.9 Format Text shall be in a horizontal format. 11B-703 SIGNS 1013 EXIT SIGNS11B-703.4.2 Location Where a tactile sign is provided at a door, the sign shall be located alongside the door at the latch side. Where a tactile sign is provided at double doors with one active leaf, the sign shall be located on the inactive leaf. Where a tactile sign is provided at double doors with two active leafs, the sign shall be located to the right of the right hand door. Where there is no wall space at the latch side of a single door or at the right side of double doors, signs shall be located on the nearest adjacent wall. Signs containing tactile characters shall be located so that a clear floor space of 18 inches (457 mm) minimum by 18 inches (457 mm) minimum, centered on the tactile characters, is provided beyond the arc of any door swing between the closed position and 45 degree open position. Where provided, signs identifying permanent rooms and spaces shall be located at the entrance to, and outside of the room or space. Where provided, signs identifying exits shall be located at the exit door when approached in the direction of egress travel. 1013.5 Internally Illuminated Exit Signs Electrically powered, self-luminous and photoluminescent exit signs shall be listed and labeled in accordance with UL 924 and shall be installed in accordance with the manufacturer's instructions and Chapter 27. Exit signs shall be illuminated at all times. 1013.1 Exits and exit access doors shall be marked by an approved exit sign readily visible from any direction of egress travel. The path of egress travel to exits and within exits shall be marked by readily visible exit signs to clearly indicate the direction of egress travel in cases where the exit or the path of egress travel is not immediately visible to the occupants. Intervening means of egress doors within exits shall be marked by exit signs. Exit sign placement shall be such that any point in an exit access corridor or exit passageway is within 100 feet (30 480 mm) or the listed viewing distance of the sign, whichever is less, from the nearest visible exit sign. 1013.6 Externally illuminated exit signs shall comply with Sections 1013.6.1 through 1013.6.3. 1013.6.2 Exit Sign Illumination The face of an exit sign illuminated from an external source shall have an intensity of not less than 5 footcandles (54 lux). 1013.6.3 Power Source Exit signs shall be illuminated at all times. To ensure continued illumination for a duration of not less than 90 minutes in case of primary power loss, the sign illumination means shall be connected to an emergency power system provided from storage batteries, unit equipment or an on-site generator. The installation of the emergency power system shall be in accordance with Chapter 27. Group I-2 exit sign illumination shall not be provided by unit equipment batteries only. Exception: Approved exit sign illumination types that provide continuous illumination independent of external power sources for a duration of not less than 90 minutes, in case of primary power loss, are not required to be connected to an emergency electrical system.