Laserfiche WebLink
SUNPOWER CORPORATION Document #524734 Rev G <br />SPAN TABLES, INVISIMOUNT Template FILE-074910, Ed. 2 <br /> <br /> <br />Document #524734 Rev G, Vol. 2 2 SunPower Proprietary <br /> <br /> <br />Module Size and Capacity: <br /> <br />• These tables are applicable to modules with the following dimensions: <br />o Maximum length: 6.56 ft. (2.00 m) <br />o Maximum surface area: 22 sq. ft. (2.04 sq. m) <br />o Maximum height: 1.57 in. (40 mm) <br />• These tables do not include a check of the module’s capacity. A module check must be performed <br />by the user in addition to identifying the appropriate span. <br />• In the Part 1 (Wind Tunnel-based) span tables, module pressures are provided adjacent to the <br />corresponding spans. These module pressures are derived from the Wind Tunnel Test Report for <br />each output condition. The user must confirm that the design capacities of the module to be used <br />are greater than both the uplift and downforce pressured identified. <br />• For the Part 2 span tables, pressure on the module must be calculated per the appropriate ASCE <br />code (7-10 or 7-16). <br />• A summary of the equations required to calculate these values is provided in the following <br />section. <br /> <br /> <br />1222 S Sycamore St - <br />201824905/3/2024