Laserfiche WebLink
VSE Project Number: A0035-0103-211 <br />David Sepulveda Residence <br />9/24/2021 <br />Limitations <br />Installation of the solar panels must be performed in accordance with manufacturer recommendations. All work performed <br />must be in accordance with accepted industry-wide methods and applicable safety standards. The contractor must notify <br />Vector Structural Engineering of Arizona, LLP should any damage, deterioration or discrepancies between the as-built <br />condition of the structure and the condition described in this letter be found. Connections to existing roof framing must be <br />staggered, except at array ends, so as not to overload any existing structural member. The use of solar panel support span <br />tables provided by others is allowed only where the building type, site conditions, site-specific design parameters, and solar <br />panel configuration match the description of the span tables. The design of the solar panel racking (mounts, rails, etc.) and <br />electrical engineering is the responsibility of others. Waterproofing around the roof penetrations is the responsibility of <br />others. Vector Structural Engineering assumes no responsibility for improper installation of the solar array. <br />Vector Structural Engineering of Arizona, LLP <br />09/24/2021 <br />_______________________________________________________ <br />Michael Gibbons, P.E. <br />Project Engineer <br />Enclosures <br />MEG/jvw <br />1635 N. Greenfield Rd., Ste. 112 / Mesa, AZ 85205 / T (480) 648-3514 / www.vectorse.com <br />Page 2 of 8 <br />Sep 24, 2021 <br />1423 N Lowell St <br />03/11/22