My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
1128 W Highland St - Plan
PBA
>
Building
>
ProjectDox
>
H
>
Highland St
>
1128 W Highland St
>
1128 W Highland St - Plan
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
6/15/2025 12:44:36 PM
Creation date
6/15/2025 12:43:56 PM
Metadata
Fields
Template:
Plan
Permit Number
20184954
30148296
40139940
101122285
101122286
Full Address
1128 W Highland St
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
73
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
Highland Manor <br />1128 Highland St <br />Santa Ana, CA, 92703 <br />SHEET NUMBER <br />SH <br />E <br />E <br />T <br /> <br />TI <br />T <br />L <br />E <br />#2 <br />4 <br />2 <br />6 <br />A <br />DAT <br />E <br />JO <br />B <br /> <br />NO. <br />DR <br />A <br />W <br />N <br />PROJECT NAME <br />PROJECT ADDRESS <br />DR <br />A <br />W <br />I <br />N <br />G <br /> <br />LO <br />G <br />DA <br />T <br />E <br />ID <br />DE <br />S <br />C <br />R <br />I <br />P <br />T <br />I <br />O <br />N <br />12 <br />/ <br />1 <br />2 <br />/ <br />2 <br />4 <br />12 <br />/ <br />2 <br />3 <br />/ <br />2 <br />4 <br />02 <br />/ <br />2 <br />4 <br />/ <br />2 <br />5 <br />01 02 03 <br />PL <br />A <br />N <br />N <br />I <br />N <br />G <br /> <br />SU <br />B <br />M <br />I <br />T <br />T <br />A <br />L <br />PR <br />E <br />L <br />I <br />M <br />I <br />N <br />A <br />R <br />Y <br /> <br />B <br />AN <br />D <br /> <br />S <br />SU <br />B <br />M <br />I <br />T <br />T <br />A <br />L <br />B <br />AN <br />D <br /> <br />S <br />CO <br />R <br />R <br />E <br />C <br />T <br />I <br />O <br />N <br />S <br /> <br />SU <br />B <br />M <br />I <br />T <br />T <br />A <br />L <br /> <br />#1 <br />A503 <br />TY <br />P <br />E <br /> <br />2 <br />- <br />(N <br />) <br /> <br />AD <br />A <br /> <br />UN <br />I <br />T <br /> <br />B <br />- <br />IN <br />T <br />E <br />R <br />I <br />O <br />R <br /> <br />EL <br />E <br />V <br />A <br />T <br />I <br />O <br />N <br />S <br />02 <br />/ <br />2 <br />4 <br />/ <br />2 <br />0 <br />2 <br />5 <br />BD <br />G <br />ALL IDEAS, DESIGNS, ARRANGEMENTS <br />AND PLANS INDICATED OR REPRESENTED <br />BY THIS DRAWING ARE OWNED BY AND <br />PROPERTY OF BELL DESIGN GROUP AND <br />WERE CREATED, EVOLVED AND <br />DEVELOPED FOR USE ON AND IN <br />CONNECTION WITH THE SPECIFIED <br />PROJECT. NONE OF SUCH IDEAS, <br />DESIGNS, ARRANGEMENTS, OR PLANS <br />SHALL BE USED BY OR DISCLOSED TO <br />ANY PERSON, FIRM OR CORPORATION <br />FOR ANY PURPOSE WHATSOEVER <br />WITHOUT THE WRITTEN PERMISSION OF <br />BELL DESIGN GROUP. WRITTEN <br />DIMENSIONS SHALL TAKE PRECEDENCE <br />OVER SCALED DIMENSIONS. <br />CONTRACTOR SHALL VERIFY AND BE <br />RESPONSIBLE FOR ALL DIMENSIONS AND <br />CONDITIONS ON THE JOB, AND THIS <br />OFFICE MUST BE NOTIFIED OF ANY <br />VARIATIONS FROM DIMENSIONS AND <br />CONDITIONS SHOWN BY THESE <br />DRAWINGS. <br />BI <br />M <br />c <br />l <br />o <br />u <br />d <br />: <br /> <br />re <br />l <br />a <br />t <br />i <br />v <br />i <br />t <br />y <br /> <br />- <br />BI <br />M <br />c <br />l <br />o <br />u <br />d <br /> <br />So <br />f <br />t <br />w <br />a <br />r <br />e <br /> <br />as <br /> <br />a <br />Se <br />r <br />v <br />i <br />c <br />e <br />/ <br />2 <br />4 <br />2 <br />6 <br />A <br /> <br />Hi <br />g <br />h <br />l <br />a <br />n <br />d <br /> <br />Ma <br />n <br />o <br />r <br />/ <br />2 <br />4 <br />2 <br />6 <br />A <br /> <br />Hi <br />g <br />h <br />l <br />a <br />n <br />d <br /> <br />Ma <br />n <br />o <br />r <br /> <br /> <br /> <br />2/ <br />2 <br />5 <br />/ <br />2 <br />0 <br />2 <br />5 <br /> <br />5: <br />2 <br />5 <br /> <br />PM <br />F <br />3 <br />2 <br />1 3 <br />A503 <br />60" MIN. <br />101 <br />106 <br />317 316 <br />FL-01 <br />103 <br />30x48 <br />30x48 <br />30x48 <br />60Ø <br />RG <br />WALL BACKING <br />AS REQUIRED <br />9 <br />REMOVABLE TUB SEAT <br />W/LEGS, PER SPECIFICATIONS <br />2 <br />A700 <br />9" <br />MI <br />N <br />. <br />11" <br />8" <br />MIN. <br />27 <br />" <br /> <br />MI <br />N <br />. <br />35 <br />" <br />33 <br />' <br />' <br /> <br />AF <br />F <br /> <br />MI <br />N <br />. <br /> <br />- <br />36 <br />' <br />' <br /> <br />MA <br />X <br />24" MAX.24" MIN12" <br />MAX. <br />19 <br />" <br />15" MIN. <br />16" MAX. <br />SEAT <br />215 <br />315 <br />PT-01 <br />212 <br />314 <br />WALL MOUNTED SINK/ <br />COUNTERTOP & CABINET <br />(PROVIDE BACKING) <br />10 <br />FROM FLOOR <br />TO DISPENSER OUTLETFROM TOILE BOWL EDGE SHOWER <br />CONTROL AREA TO CENTER OF <br />DISPENSER (CENTER OF NEAREST <br />PAPER ROLL) <br />11 <br />14 <br />10 <br />WALL BACKING <br />AS REQUIRED <br />WALL BACKING <br />AS REQUIRED <br />1'-6" <br />18" MIN. <br />27 <br />" <br /> <br />MA <br />X <br />. <br />40 <br />" <br /> <br />MA <br />X <br /> <br />TO <br /> <br />BO <br />T <br />T <br />O <br />M <br /> <br />OF <br />RE <br />F <br />L <br />E <br />C <br />T <br />I <br />V <br />E <br /> <br />SU <br />R <br />F <br />A <br />C <br />E <br />3' <br />- <br />6 <br />" <br />3'-0" <br />30" MIN. <br />48" GRAB BAR10" <br />35 <br />" <br />33 <br />' <br />' <br /> <br />AF <br />F <br /> <br />MI <br />N <br />. <br /> <br />- <br />36 <br />' <br />' <br /> <br />MA <br />X <br />. <br />TO <br /> <br />TO <br />P <br /> <br />OF <br /> <br />BA <br />R <br />. <br /> <br />GC <br /> <br />TO <br />CO <br />O <br />R <br />D <br />I <br />N <br />A <br />T <br />E <br /> <br />MO <br />U <br />N <br />T <br />I <br />N <br />G <br />HE <br />I <br />G <br />H <br />T <br /> <br />LO <br />C <br />A <br />T <br />I <br />O <br />N <br /> <br />WI <br />T <br />H <br />FL <br />O <br />O <br />R <br /> <br />SL <br />O <br />P <br />54" MIN <br />1' <br />- <br />6 <br />" <br />8" <br />19 <br />" <br /> <br />MI <br />N <br />40 <br />" <br />18 <br />" <br />GR <br />A <br />B <br /> <br />BA <br />R <br />24" MIN 3" <br />MIN.1 <br />1/ <br />2 <br />" <br />MI <br />N <br /> <br />CL <br />R <br />. <br />17 <br />" <br />- <br />1 <br />9 <br />" <br />35 <br />" <br />3' <br />- <br />4 <br />" <br />48 <br />" <br /> <br />MA <br />X <br />. <br />24" <br />GRAB BAR <br />215 <br />315 <br />PT-01 <br />313 <br />215 <br />CT-02 <br />216 <br />312 <br />311 <br />211 <br />314 <br />B-01 <br />9 <br />SHOWER CONTROL <br />AREA <br />14 <br />(N) LIGHT <br />FIXTURE <br />CL <br />OPEN <br />MIRROR <br />11 <br />WALL BACKING <br />AS REQUIRED <br />FROMFLOOR <br />TO DISPENSER <br />OUTLET <br />14 <br />CL <br />19 <br />" <br /> <br />MI <br />N <br />12"24" <br />6"36" <br />1' <br />- <br />6 <br />" <br />17'-18" <br />FROM CENTER OF <br />TOILET <br />TO WALL FINISH <br />35 <br />" <br />33 <br />' <br />' <br /> <br />AF <br />F <br /> <br />MI <br />N <br />. <br /> <br />- <br />36 <br />' <br />' <br /> <br />MA <br />X <br />. <br />TO <br /> <br />TO <br />P <br /> <br />OF <br /> <br />BA <br />R <br />. <br /> <br />GC <br /> <br />TO <br />CO <br />O <br />R <br />D <br />I <br />N <br />A <br />T <br />E <br /> <br />MO <br />U <br />N <br />T <br />I <br />N <br />G <br />HE <br />I <br />G <br />H <br />T <br /> <br />LO <br />C <br />A <br />T <br />I <br />O <br />N <br /> <br />WI <br />T <br />H <br />FL <br />O <br />O <br />R <br /> <br />SL <br />O <br />P <br />8" <br />M <br />I <br />N <br />. <br />BL <br />O <br />C <br />K <br />I <br />N <br />G <br />PT-01 <br />313 <br />215 <br />B-01 <br />14 <br />WALL BACKING <br />AS REQUIRED <br />20 <br />935 <br />" <br />33 <br />' <br />' <br /> <br />AF <br />F <br /> <br />MI <br />N <br />. <br /> <br />- <br />36 <br />' <br />' <br /> <br />MA <br />X <br />. <br />TO <br /> <br />TO <br />P <br /> <br />OF <br /> <br />BA <br />R <br />. <br /> <br />GC <br /> <br />TO <br />CO <br />O <br />R <br />D <br />I <br />N <br />A <br />T <br />E <br /> <br />MO <br />U <br />N <br />T <br />I <br />N <br />G <br />HE <br />I <br />G <br />H <br />T <br /> <br />LO <br />C <br />A <br />T <br />I <br />O <br />N <br /> <br />WI <br />T <br />H <br />FL <br />O <br />O <br />R <br /> <br />SL <br />O <br />P <br />12" <br />MIN <br />2'-6" MIN. <br />43 <br />' <br />' <br /> <br />MA <br />X <br /> <br />TO <br /> <br />TO <br />P <br /> <br />OF <br />BO <br />T <br />T <br />O <br />M <br /> <br />SH <br />E <br />L <br />F <br />PT-01 <br />212 <br />314 <br />217 215 <br />213 <br />214 <br />B-01 <br />19 <br />" <br />DD <br />1 <br />DD <br />34 <br />" <br /> <br />MA <br />X <br />1'-0" <br />2'-0"1"2'-6"2'-6" <br />3 D <br />1 <br />D <br />OPEN <br />34 <br />" <br /> <br />MA <br />X <br />2'-0"2'-8"1'-0"3"3 1/4"1'-0" <br />1'-0"1'-0"2'-0" <br />2'-6" <br />30 MIN. CLR. <br />27 <br />" <br /> <br />MI <br />N <br />19" <br />MIN <br />REMOVABLE CABINET <br />317 <br />316 <br />CT-01 <br />PT-01 <br />WATER SUPPLY AND DRAIN PIPES UNDER KITCHEN <br />SINKS SHALL BE INSULATED OR OTHERWISE <br />COVERED TO PROTECT AGAINST CONTACT. THERE <br />SHALL BE NO SHARP OR ABRASIVE SURFACES <br />UNDER KITCHEN SINKS. (1133A.7.1) <br />30 "HOOD6 <br />D DD <br />1 <br />34 <br />" <br /> <br />MA <br />X <br />2"3'-1"1'-6"2'-8"2'-8"2'-0" <br />1'-9"2'-6"1'-9"2'-0"1'-0" <br />2'-6" <br />30" MIN. CLR. <br />27 <br />" <br /> <br />MI <br />N <br />. <br />3'-1" <br />1' <br />- <br />6 <br />" <br />3' <br />- <br />2 <br />" <br />REMOVABLE CABINET <br />101 <br />106 <br />103 <br />2 <br />3 <br />4 <br />1 4 <br />A503 <br />314 <br />313 <br />FL-01 <br />30x48 <br />60x6630x60 <br />60Ø <br />6" <br />36 <br />" <br />GR <br />A <br />B <br /> <br />BA <br />R <br />17 <br />" <br />- <br />1 <br />8 <br />" <br />5' <br />- <br />0 <br />" <br />60 <br />" <br /> <br />MI <br />N <br /> <br />CL <br />R <br />. <br />48" <br />GRAB BAR <br />10" <br />5'-6" <br />66" MIN. CLR. <br />1'-6" <br />18" MIN <br />5' <br />- <br />3 <br />" <br />60 <br />" <br /> <br />MI <br />N <br />. <br />2'-6" <br />MIN. CLR. <br />312 311 <br />03 <br />03 <br />SCALE: 1/2" = 1'-0"1ENLARGED KITCHEN PLAN <br />SCALE: 1/2" = 1'-0"2ENLARGED BATHROOM PLAN <br />SCALE: 1/2" = 1'-0"3KITCHEN INTERIOR ELEVATIONS <br />SCALE: 1/2" = 1'-0"4BATHROOM INTERIOR ELEVATIONS <br />12 <br />1234 <br />3 <br />ACCESSIBLE KEYNOTES <br />SOME KEYNOTES MAY NOT PERTAIN TO THIS SHEET <br />1. BASE CABINET: 23" DEEP WITH 4" SQUARE TOE KICK AND 1 FIXED SHELF U.O.N.. <br />COUNTERTOP MAX. DEPTH 24" FROM BACK WALL TO OUTER EDGE OF BULLNOSE <br />WITH 4" TALL BACKSPLASH SET 34" MAXIMUM FROM FINISH FLOOR TO TOP OF <br />COUNTERTOP. SEE UPPER CABINET NOTE FOR SHELF REQUIREMENTS. BASE <br />CABINETS DIRECTLY UNDER THE KITCHEN SINK COUNTER AND ADJACENT TO ONE <br />SIDE OF KITCHEN RANGE AREAS, INCLUDING TOE BOARD AND SHELVING, SHALL BE <br />REMOVABLE WITHOUT THE USE OF SPECIALIZED TOOLS OR SPECIALIZED <br />KNOWLEDGE IN ORDER TO PROVIDE WIDTH ENOUGH TO ACCOMMODATE 30'' MIN <br />FOR A WHEELCHAIR. THE FINISH FLOOR BENEATH THE KITCHEN SINK COUNTER AND <br />ONE SIDE ADJACENT TO KITCHEN RANGE AREAS SHALL BE EXTENDED TO THE WALL. <br />2. UPPER CABINET: 12" DEEP W/ 2 ADJUSTABLE SHEVES (24" DEEP OVER <br />REFRIGERATOR W/ 1 FIXED SHELF.) CABINET SHELVING SUPPORTS TO COMPLY <br />WITH "ARCHITECTURAL WOODWORK STANDARDS" FOR TYPE AND THICKNESS OF <br />WOOD SHELF PROVIDED SHELVES TO BE FACTORY FINISHED. BASE LEVEL SHELF IS <br />46'' HIGH MAX TO FINISH FLOOR IN ACCESSIBLE KITCHEN. <br />3. KITCHEN SINK: W/ 1/2 H.P. GARBAGE DISPOSAL, PROVIDE HOLE FOR DISHWASHER <br />AIR GAP IN SINK DECK. CABINET TOE KICK AND SHELF BELOW SINK TO BE <br />REMOVABLE. FLOORING TO EXTEND TO BACK WALL FULL AREA BELOW SINK. THE <br />SINK SHALL BE INSTALLED WITH THE FRONT OF THE HIGHER OF THE RIM OR <br />COUNTER SURFACE 34" MAXIMUM ABOVE THE FINISH FLOOR OR GROUND. MAXIMUM <br />SINK BOWL DEPTH SHALL BE 6-1/2". FAUCET CONTROLS AND OPERATING <br />MECHANISMS SHALL BE OPERABLE WITH ONE HAND AND SHALL NOT REQUIRE <br />TIGHT GRASPING, PINCHING OR TWISTING OF WRIST. THE FORCE REQUIRED TO <br />ACTIVATE CONTROLS SHALL BE NO GREATER THAN 5 POUND FORCE (22.2N). <br />LEVER-OPERATED, PUSH TYPE AND ELECTRONICALLY CONTROLLED MECHANISMS <br />ARE EXAMPLES OF ACCEPTABLE DESIGNS. SELF-CLOSING VALVES ARE ALLOWED IF <br />THE FAUCET REMAINS OPEN FOR AT LEAST 10 SECONDS. WATER SUPPLY AND <br />DRAIN PIPES UNDER LAVATORIES AND SINKS SHALL BE INSULATED OR OTHERWISE <br />CONFIGURED TO PROTECT AGAINST CONTACT. THERE SHALL BE NO SHARP OR <br />ABRASIVE SURFACES UNDER SINKS. NO MORE THAN ONE BOWL OF A MULTI-BOWL <br />SINK SHALL BE REQUIRED TO PROVIDE KNEE AND TOE CLEARANCE COMPLYING <br />WITH SECTION 306. SINK SHALL HAVE A REAR MOUNTED BASKET STRAINER. <br />PROVIDE 1/4 TURN ANGLE STOP AND SUPPLY LINES. <br />4. NOT IN USE, <br />5. REFRIGERATOR: 1'' MIN. SPACING FROM CABINET COUNTERTOP EDGE OR GYP. BD. <br />FINISH TO REFRIGERATOR AND 1'' MIN. AT OPPOSING SIDE. SPACE MAY BE VARIES <br />PER MANUFACTURE SPEC. OBTAIN OWNERS SPEC. FOR PRODUCT PRIOR TO <br />CABINET FABRICATION. COMBINATION REFRIGERATORS AND FREEZERS SHALL <br />HAVE AT LEAST 50% OF THE FREEZER SPACE 54 INCHES MAX. ABOVE FINISH FLOOR <br />OR GROUND. <br />6. HOOD & FREE STANDING RANGE: GAS 30" WIDE WITH EXTERIOR VENTED RANGE <br />HOOD ABOVE. OVERALL HOOD TO BE 6" WIDER THAN RANGE BELOW <br />(RECOMMENDED). RANGE HOOD SHALL BE WIRED TO AN ACCESSIBLE WALL SWITCH <br />LOCATED WITHIN REACH LIMITS, SEE KEYNOTE #19 FOR DIMENSION. VERIFY <br />DIMENSION AND INSTALLATION PRIOR TO CABINET FABRICATION. <br />7. PANTRY: WIDTH AS NOTED, 24" DEEP WITH 5 ADJUSTABLE SHELVES. <br />8. BAR COUNTER: 34" MAX. HEIGHT ABOVE FINISH FLOOR WITH 2x6 WALL BELOW <br />COUNTER AT BACK OF CABINET. <br />9. TUB/SHOWER: MANUFACTURED 32"x60" OR 39''x62'' (PER DRAWING) WITH INTEGRAL 3 <br />WALL SURROUND (FIBERCARE OR APPROVED EQUAL). INSTALL 5/8'' THICK GYP. <br />BOARD. (PAPERLESS PER LEER REQUIREMENTS DENS-SHIELD OR EQUAL) WITH <br />LEVEL 1 FINISH. PROVIDE INTEGRAL GRAB BAR BACKING AT MANUF. SURROUNDS. <br />PROVIDE CURVED SHOWER ROD, RINGS AND CURTAIN. <br />10. BATHROOM LAVATORY: (N) SOLID SURFACE COUNTER W/ INTEGRAL SINK, LEVER <br />FAUCET PER SPECIFICATION. CABINET DEPTH MAX. 22" FROM BACK WALL TO FACE. <br />COUNTERTOP DEPTH MAX. 23-1/2" FROM BACK WALL TO FACE OF BULLNOSE WITH 4" <br />SPLASH AT BACK AND SIDE WALLS ADJ. TO GYP. BD. HEIGHT PER PER ADA <br />STANDARDS 606.3. SINK RIM TO BE SET MAX. 34" A.F.F. BASE CABINET BELOW <br />LAVATORY TO HAVE REMOVABLE SHELF AND TOE KICK WITH DOOR OPENING WIDE <br />ENOUGH TO ACCOMMODATE 30" MIN. FRONT APPROACH BELOW SINK. SINK <br />CENTERLINE TO BE MIN. 24" CLR. TO ADJ. WALL. FINISHED PANELS AT CABINET <br />SIDES BELOW SINK. EXTEND FLOORING BELOW SINK TO BACK WALL. TEXTURE <br />PRIME AND PAINT BACK WALL BELOW SINK AND PROVIDE WALL BASE. PROVIDE 1/4 <br />TURN ANGLE STOP 4 SUPPLY LINES. WATER SUPPLY AND DRAIN PIPES UNDER <br />LAVATORIES AND SINKS SHALL BE INSULATED OR OTHERWISE CONFIGURED TO <br />PROTECT AGAINST CONTACT. <br />11. WATER CLOSET: (N) 1.28 G.P.F. HIGH EFFICIENCY TOILETS WITH NEW WAX RING. <br />PLANS DEVELOPED TO ACCOMMODATE MAX. 30" DEEP WATER CLOSET FROM BACK <br />WALL TO FRONT EDGE OF SEAT TO COMPLY WITH C.B.C. 1134A.7. PROVIDE 2x10 <br />BLOCKING WITHIN WALLS AT ACCESSIBLE BATHROOM FOR GRAB BARS, PROVIDE 1/4 <br />TURN ANGLE STOP AND SUPPLY LINE. <br />12. NOT IN USE. <br />13. MEDICINE CABINET: BOTTOM SHELF MOUNTED AT 44" MAXIMUM ABOVE FINISH <br />FLOOR AND MIRROR MAXIMUM 40" ABOVE FINISH FLOOR, USE MIRROR AS <br />GOVERNING HEIGHT. <br />14. GRAB BAR: GRAB BAR REINFORCEMENT INSTALLED ON THE BACK WALL OF THE <br />BATHTUB: 6” MAXIMUM ABOVE THE BATHTUB RIM; EXTENDING UPWARD TO AT LEAST <br />38” ABOVE THE FLOOR. GRAB BAR BACKING INSTALLED HORIZONTALLY TO PERMIT <br />THE INSTALLATION OF 48” GRAB BAR WITH EACH END. <br />15. TOWEL BAR: 24" WIDE U.O.N. W/ 2X10 SOLID BLOCKING WITHIN WALL CENTERED 40" <br />ABV. FIN. FLR. TO BE DETERMINED IN FIELD. <br />16. NOT IN USE. <br />17. NOT IN USE. <br />18. CLOSET SHELF & POLE: PROVIDE CONCEALED 2x BLOCKING WITHIN WALLS FOR <br />SHELF AND POLE BRACKET SUPPORT VERIFY LOCATION REQUIREMENTS WITH <br />SUPPLIER. AT SINGLE SHELF AND POLE SET BLOCKING FOR POLE AT 46" A.F.F. AT <br />DOUBLE SHELVES AND POLES SET BLOCKING FOR TOP POLE AT 80" AND LOWER <br />POLE AT 40" A.F.F. SHELVES TO BE 5/8'' THK. ROOD FACTORY PRIMED FIELD PAINTED. <br />AT GOAT CLOSET, PROVIDE SHELF AND POLE. AT BEDROOM CLOSET, PROVIDE <br />DOUBLE SHELVES AND POLE. AT BEDROOM W.I.C., PROVIDE DOUBLE SHELVES AND <br />DOUBLE POLES. <br />19. ELECTRICAL RECEPTACLE: LOCATED 48” MAXIMUM MEASURED FROM THE FINISHED <br />FLOOR (OR WORKING PLATFORM) TO THE TOP OF THE OUTLET BOX (RECEPTACLE, <br />SWITCH, CONTROL, ETC.). 15” MINIMUM MEASURED FROM THE FINISHED FLOOR ( OR <br />WORKING PLATFORM) TO THE BOTTOM OF THE OUTLET BOX. FORWARD APPROACH: <br />OBSTRUCTION BETWEEN 20”-25”, HEIGHT REDUCED TO 44” MAXIMUM. SIDE <br />APPROACH: OBSTRUCTION 24” MAXIMUM, HEIGHT REDUCED TO 46” MAXIMUM. <br />RANGE HOOD CONTROLS MUST BE WITHIN ACCESSIBLE REACH RANGE <br />20. HAND-ACTIVATED DOOR HARDWARE: CENTERED BETWEEN 30 AND 44 INCHES <br />ABOVE THE FLOOR. HAND-ACTIVATED LATCHING/LOCKING DOORS ON AN <br />ACCESSIBLE ROUTE OPERABLE WITH A SINGLE EFFORT BY HARDWARE PROVIDING <br />PASSAGE WITHOUT REQUIRING ABILITY TO GRASP THE OPENING HARDWARE. THE <br />LEVER OR LEVER OF ACTUATED LATCHES/LOCKS SHALL BE CURVED WITH A RETURN <br />TO WITHIN ½” OF THE DOOR TO PREVENT CATCHING ON THE CLOTHING OF <br />PERSONS DURING EGRESS. EXCEPTION: GROUP R AND U OCCUPANCIES WITH AN <br />OCCUPANT LOAD OF 10 OR LESS. <br />21. LAUNDRY WASHER & DRYER: ENERGY STAR MODEL, TOP LOADING MACHINES SHALL <br />HAVE THE DOOR TO THE LAUNDRY COMPARTMENT LOCATED 36 INCHES MAXIMUM <br />ABOVE THE FINISH FLOOR. FRONT LOADING MACHINES SHALL HAVE THE BOTTOM <br />OF THE OPENING TO THE LAUNDRY COMPARTMENT LOCATED 15 INCHES MINIMUM <br />AND 36 INCHES MAXIMUM ABOVE THE FINISH FLOOR. <br />11B-804.6.6 REFRIGERATOR/FREEZER- COMBINATION REFRIGERATORS AND FREEZERS SHALL HAVE AT <br />LEAST 50 PERCENT OF THE FREEZER SPACE 54 INCHES (1372 MM) MAXIMUM ABOVE THE FINISH FLOOR OR <br />GROUND. THE CLEAR FLOOR OR GROUND SPACE SHALL BE POSITIONED FOR A PARALLEL APPROACH TO <br />THE SPACE DEDICATED TO A REFRIGERATOR/FREEZER WITH THE CENTERLINE OF THE CLEAR FLOOR OR <br />GROUND SPACE OFFSET 24 INCHES (610 MM) MAXIMUM FROM THE CENTERLINE OF THE DEDICATED SPACE <br />11B-603.3 MIRRORS- MIRRORS LOCATED ABOVE LAVATORIES OR COUNTERTOPS SHALL BE INSTALLED <br />WITH THE BOTTOM EDGE OF THE REFLECTING SURFACE 40 INCHES (1016 MM) MAXIMUM ABOVE THE FINISH <br />FLOOR OR GROUND. MIRRORS NOT LOCATED ABOVE LAVATORIES OR COUNTERTOPS SHALL BE INSTALLED <br />WITH THE BOTTOM EDGE OF THE REFLECTING SURFACE 35 INCHES (889 MM) MAXIMUM ABOVE THE FINISH <br />FLOOR OR GROUND. <br />11B-804.6.5 OVEN- SIDE-HINGED DOOR OVENS SHALL HAVE THE WORK SURFACE REQUIRED BY SECTION <br />11B-804.3 POSITIONED ADJACENT TO THE LATCH SIDE OF THE OVEN DOOR. BOTTOM-HINGED DOOR <br />OVENSBOTTOM-HINGED DOOR OVENS SHALL HAVE THE WORK SURFACE REQUIRED BY SECTION 11B-804.3 <br />POSITIONED ADJACENT TO ONE SIDE OF THE DOOR. OVENS SHALL HAVE CONTROLS ON FRONT PANELS. <br />KITCHEN SHELVING AREA CALCULATIONS <br />NOTE: 50% OF CABINET SPACE SHALL MEET CBC, SECTION 11B-804.5 <br />OVERALL SHELVING AREA <br />LOWER CABINETS <br />UPPER CABINETS <br />PANTRY <br />TOTAL <br />ACCESSIBLE SHELVING AREA <br />LOWER CABINETS <br />UPPER CABINETS <br />PANTRY <br />TOTAL <br />REQ. ACCESSIBLE SHELVING AREA: 36.5 SF (MIN. 50% OF TOTAL SHELVING AREA) <br />PROVIDED ACCESSIBLE SHELVING AREA: 39 SF (53.4%) <br />56 SF <br />17 SF <br />0 SF <br />73 SF <br />39 SF <br />0 SF <br />0 SF <br />39 SF <br />1128 W Highland St <br />3/27/2025
The URL can be used to link to this page
Your browser does not support the video tag.