10180173_131 E. MEMORY - Plan - Laserfiche WebLink

Home Browse Search

October 1, 2013 SIGN COMPONENTS MANUAL (SAM)146 1. These power supplies have been evaluated to Class 2 output requirements for dc circuits with a maximum of one Class 2 output. 2. These products are provided with the following electrical ratings: Input Output Output Input Input Current P0wer Voltage (V Output Power Model No.Voltage (V)Freq (HZ) (A) Factor dc) Current (A) (W) LCU 060/12 D 120-240 50/60 0.75 0.95 12 5.0 60 LCU 035/12 0XX 120-240 50/60 0.39 0.95 12 2.92 35 LCU 015/12 D 120-240 50/60 0.35 0.4 12 1.25= 15 3. In the end product, power supply spacing to other heat producing components shall be at least 25.4 mm (1 in) from end to end and 101 6 mm (4 in) from side to side. 4. These products shall be enclosed in suitable electrical enclosure in the end product. 5. These products are suitable for factory wirihg only. 6. The load powered by the Class 2 output of these power supplies at the 12 Vdc rating or less is suitable for use in dry, damp and wet locations. 7. These products have been tested in oven at 50°C ambient, with the following maximum case temperatures, T, For model LCU 060/12 D the Tc = 82°C: for model LCU 035/12 D XX the Tc = 64°C; for model LCU 035/12 D XX the Tc74°C. 8. These products are intended for use in a dry or damp locations only. 9. The suitability of inpuUoutput leads and the wring shall be determiAed in end product use. 10. The metal case of Model LCU=015/12 D is not grounded. The proper grounding means of this product shall comply with the end product requirements. Class 2 LED modules Models P541-CLA, P551-SEL. 1. These products are only suitable for connection to a Class 2 power source rated 14 V DC or less. 2. These products are intended for use only when connected to a power source that complies with Class 2 voltage and energy limited circuit and is rated at 14 V DC or less. 3. When these units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output rating of the Class 2 supply. 4. These products are suitable for use in dry, damp and wet locations with supply sources rated at 14 V DC or less. 5. These products are not required to be enclosed or protected from the weather in the end product. 6. These products may be secured in place in the end product by any means available. TRONICC TECHNOLOGIES E357992 18584 BUDGE PIERREFONDS, QC H9K1 K8 CANADA Sign accessories, Class 2 LED modules, TT-M-01, TT-M-02, TT-M-03, TT-M-04,1-T-8-01. 1. These products were evaluated for connection to a UL Listed or Recognized Component Sign Accessory - UYMR2, Class 2 source. 2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage and energy limiting requirements. 3. When these units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output rating of the Class 2 supply. 4. These products are suitable for use in dry and damp locations. 5. Consideration for the installation and power supply connection and interconnection is to be determined in the end-use application. TUBE LIGHTING PRODUCTS E348777 1346 PIONEER WAY EL CAJON, CA 92020 Class 2 LED Strip, Model DSH Series. 1. These products are intended for use only when connected to a power sourcei that complies with Class 2 voltage and energy limited circuit and is rated less than 24V DC. 2. When these units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output rating of the Class 2 supply. 3. These products are suitable for use'in dry, damp and wet locations. 4. These products do not require an electrical enclosure. 5. These products may be secured in place in the end product by any means available. U S LED LTD E226833 6807 PORTWEST DR HOUSTON, TX 77024 Class 2 LED Module, Model MY-12-K-XX "MegaX" Series, where Y may be replaced by any number from 0 to 99 ind., K may be replaced by W, R, B, Y, G or RO and XX is optional, where it may be replaced by any alphanumeric characters.(0 to 99 ind. or A to Z incl. or combinations). 1.These products are only suitable for connection to a Class 2 power source, rated max 24 Volt DC or less. 2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage and energy limited circuit. 3. These Class 2 LED Modules are each rated 0.77 Watts per unit. When units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output rating of the Class 2 supply. 4. These products are suitable for use in dry, damp and wet locations with supply sources rated at 12 Volt DC or less. When rated 24 VDC, these products are suitable for dry and damp locations only. 5. These products are not required to be enclosed or protected frorri the weather in the end product.