|
67 SIGN COMPONENTS MANUAL (SAM)October 1, 2013
<br />HUDNUT CO INC E257980
<br />730 NE 21STAVE
<br />PORTLAND, OR 97232
<br />Class 2 LEDs, Cat. Nos. Class 2 LED Strip.
<br />1. These products are only suitable for connection to a UL Listed or Recognized,Class,2, maximum 30 volt continuous (non-
<br />interrupted) DC power source.
<br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage
<br />and energy limited supplies.
<br />3. When these units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondar·y or
<br />output rating of the Class 2 supply.
<br />4. These products are suitable for use in dry, damp, and wet locations.
<br />5. In a wet location. these products are not required to be enclosed or protected from weather,
<br />HYRITE LIGHTING CO
<br />252 S 5TH AVE
<br />E306782
<br />CITY OF INDUSTRY, CA 91746
<br />Class 2 LEDs Cat Nos. LEDMX-KN Series. where X may be replaced with any letters of alphabet A through Z or blank; K may be
<br />replaced by R, A, Y, B, G or W and N may be replaced with any numbers 0 through 999.
<br />1. These products are only suitable for connection to a Class 2 power source, rated max 15 Volt DC or less.
<br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage
<br />and energy limited circuit.
<br />3. Class 2 LED Module Cat. Nos. M LEDMX-K series is each rated max. 7.5 Watts per unit. When units are connected to a Class
<br />2 circuit, they are not to draw a total wattage of greater than the secondary or output rating of the Class 2 supply.
<br />4. These products are suitable for use in dry, damp and wet locations with supply sources rated at 12 Volt DC or less.
<br />5. These products are not required to be enclosed or protected from the weather in the end product.
<br />LED power supply with Class 2 outputs, Cat. No. SPS-)<0-12, where X is 4, 6 or 9, may be followed by the letter "C".
<br />1. These power supplies have a maximum of one Class 2 output. However, Model SPS-90-12 has a maximum of two Class 2
<br />outputs. The output of these power supplies has been evaluated to Class 2 output requirements for dc circuits.
<br />2. These products with Class 2 outputs are suitable for use in dry and damp locations.
<br />3. In the end product, power supply spacing to other heat producing components;'shall be minimum 4 inches spacing to sidewalls,
<br />and minimum 2 inches spacing to top of enclosure.
<br />4. When used in a cord connected product, the.need for conducting a leakage current test stiall be considered in the end
<br />product.
<br />5 The suitability of groundjng connection shall be determined in the end-use product.
<br />Polymeric Neon Electrodes, End Cap, Models EC-108-U, EC-183-U, EC-15S-U, EC-133-U,,and EC-203-U.
<br />1 These devices are rated max. 7500 V ac to ground. May be used with 15K mid-point grounded transformer.
<br />2. These products are suitable for use in dry or damp locations.
<br />3. These products are required to be enclosed or protected from the weather.
<br />4. As of the September 5,2008 effective date of UL879, Eighth Edition, all Integral Sleeved GTO cables indicated as suitable for
<br />usewith the neon electrode enclosures covered by this report shall have a temperature rating of min. 120(C minimum for dry
<br />locations and min. 135(C for damp locations.
<br />5. These products are only for use in Listed signs and Sections of signs and are not suitable for field installed skeletal neon or
<br />outline lighting.
<br />6. The units shall be subjected to a High Voltage Dielectric Strength test in the end product.
<br />7. These components were evaluated for use with the Listed GTO cables made by Transco Inc (E226224) GTO-15 and Paige
<br />Electric Co L P (E 135239), GTO-15, and Hyrite Lighting Co., (E351585), GTO-15-Sand GTO-10-S. Usewithany other GTO type
<br />or manufacture will need to be evaluated ih the end product.
<br />HYUNDAI LED CO LTD E258512
<br />602-6 PALGOGIL-DONG
<br />SANGNOK-GU
<br />ANSAN-SHI, GYEONGGI-DO 426-200 REPUBLIC OF KOREA
<br />LED Module, Cat. No. BBBX-YZVW Series, where BBB may be any alpha characters from A to ZZZ: X.may be any combinations
<br />of alphanumeric characters from A to Z or from 0 to 999; where YZV may be any combination of alphanumeric characters and W
<br />may be blank or any numeric character from 0 to 1.
<br />1. Each Class 2 LED Modules: BBBX-YZVW Series is only suitable for connection to a Class 2 power source, max. 24 Volt dc or
<br />less.
<br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage
<br />and energy limits.
<br />3. Class 2 LED modules, BBBX-YZVW Series rated max. 12 Watts per LED unit or less. When units are connected to a Class 2
<br />circuit, they are not to draw a total wattage of g feater than the secondary or output rating of the Class 2 swpply.
<br />4. These products are;suitable for use in dr·y, damp and wet locations with supply sources rated at max. 24 Volt DC or less.
<br />5. These products are not required to be enclosed or protected from the weather in the end product.
<br />LED Module, Cat. Nos. BFL225-YZ12 (F-LED225), BFL235-YZ 12 (F-LED235), BFL435-YZ12 (F-LED#35), BFL313-YZ12 (F-
<br />LED313), BFL301-YF 12 (RGB301), BFL300c-YF12 (RGB300(J), BFL900C-YF 12 (RGB900C) and BL05-YF24 (BL05).
<br />1. These Class 2 LED modules are only suitable for connection to a Class 2 power source, rated 15 Volt or less.
<br />2. These products have not been evaluated for use when connected to a power source thal does not comply with Class 2 voltage
<br />and energy limits.
<br />3. These Class 2 LED modules are rated max. 2 Watts per LED module. When these units are connected to a Class 2 circuit, they
<br />are notto draw a total wattage of greater than the secondary or output rating of the Class 2 supply.
<br />4. These products are suitable for use in dry, damp and wet locations with supply sources rated at max. 15 Volts or less.
<br />G
|