Laserfiche WebLink
SOLARMOUNT <br />Top Mounting UniRac Grounding Clips and WEEBLugs - 225.6 <br />UGC-1 <br />/9. <br /> Nib <br />1.m <br />M, <br />Top , <br />ounting - 1 <br />:lamps 1, <br />odule <br />T-bolt <br />Intertek <br />Conforms to <br />UL Standard 467 <br />..4-L. uGC-1 .14-6 <br />1 1 <br />Figure 26. Slide UGC-1 grounding <br />clip into top mountingslot OfraiL <br />Torque modules in place on top of <br />clip. Nibs will penetrate rail anod- <br />ization and create groundingpath <br />through rail (see Fig. 3, reverse side). <br />SolarMount® rail (any type) <br /> WEEBLug <br />Stainless Steel Flat <br />Washer (WEEB) <br />Clips and lugs are sold separately. <br />Figure 2Z Insert a bolt in the <br />aluminum rail or through the <br />clearance hole in the stainless steel <br />flat washer. Place the stainless steel <br />flat washer on the bolt, oriented <br />so the dimples will contact the <br />aluminum rail Place the lugportion <br />on the bolt and stainless steel,flat <br />washer. Install stainless steel.flat <br />washer, lock washer and nut. <br />Tighten the nut until the dimples are <br />completely embedded into the rail <br />and lug. The embedded dimples make <br />agas-tight mechanical connection <br />and ensure good electrical connection <br />between the aluminum rail and the <br />lug through the WEB. <br />Figure 28. UGC-1 layoutforeven <br />and odd number ofmodules in row, <br />'0(" denotes places to install UGC-1. <br />LJ r- <br />Even Number OfModules in row <br />C <br />J. <br />I <br />Odd Number ofModules in row <br />...1 1 1 RAC <br />A HILTI GROUP COMPANY <br />Pub 110617-2cc <br />June 2011 <br />© 2011 by Unirac, inc. <br />All rights reserved.