Laserfiche WebLink
(1) Pairing PV modules with wattage above the limit may result in additional clipping losses. See the compatibility calculator at https://link.enphase.com/module-compatibility. <br />(2) Nominal voltage range can be extended beyond nominal if required by the utility. (3) Limits may vary. Refer to local requirements to define the number of microinverters per <br />branch in your area. <br />IQ7 and IQ7+ Microinverters <br />INPUT DATA (DC)UNITS IQ7-60-2-US IQ7PLUS-72-2-US <br />Commonly used module pairings1 W 235–350 235–440 <br />Module compatibility 60-cell/120 half-cell PV modules only 60-cell/120-half-cell and 72-cell/144-half-cell PV <br />modules <br />MPPT voltage range V 27–37 27–45 <br />Operating range V 16–48 16–60 <br />Min./max. start voltage V 22/48 22/60 <br />Max. input DC voltage V 50 60 <br />Max. continuous input DC current A 10 12 <br />Max. input DC short-circuit current A 25 <br />Max. module Isc A 20 <br />Overvoltage class DC port II <br />DC port back-feed current mA 0 <br />PV array configuration 1 × 1 ungrounded array; No additional DC side protection required; AC side protection requires max 20 A <br />per branch circuit <br />OUTPUT DATA (AC)UNITS IQ7-60-2-US IQ7PLUS-72-2-US <br />Peak output power VA 250 295 <br />Max. continuous output power VA 240 290 <br />Nominal (L-L) voltage/range2 V 240/211–264, 208/183-229 <br />Max. continuous output current A 1.0 (240 V)/1.15 (208 V)1.21 (240 V)/1.39 (208 V) <br />Nominal frequency Hz 60 <br />Extended frequency range Hz 49–68 <br />AC short circuit fault current over <br />three cycles Arms 5.8 <br />Max. units per 20 A (L-L) branch circuit3 16/13 13/11 <br />Total harmonic distortion %<5 <br />Overvoltage class AC port III <br />AC port back-feed current mA 18 <br />Power factor setting 1.0 <br />Grid-tied power factor (adjustable)0.85 leading ... 0.85 lagging <br />Peak efficiency %97.6 (240 V)97.5 (240 V)/97.3 (208 V) <br />CEC weighted efficiency %97 <br />Nighttime power consumption mW 60 <br />MECHANICAL DATA <br />Ambient temperature range -40°C to 65°C (-40°F to 149°F) <br />Relative humidity range 4% to 100% (condensing) <br />DC connector type MC4 (or Amphenol H4 UTX with additional Q-DCC-5 adapter) <br />Dimensions (H × W × D)212 mm (8.3") × 175 mm (6.9") × 30.2 mm (1.2") without bracket <br />Weight 1.08 kg (2.38 lbs) <br />Cooling Natural convection—no fans <br />Approved for wet locations Yes <br />Pollution degree PD3 <br />Enclosure Class II double-insulated, corrosion-resistant polymeric enclosure <br />Environ. category/UV exposure rating NEMA Type 6/outdoor <br />COMPLIANCE <br />Certifications <br />CA Rule 21 (UL 1741-SA), UL 62109-1, IEEE 1547:2018 (UL 1741-SB 3rd Ed.), HEI Rule 14H SRD 2.0, FCC Part 15 Class B, ICES-0003 Class B, CAN/ <br />CSA-C22.2 NO. 107.1-01 <br />This product is UL Listed as PV Rapid Shutdown Equipment and conforms with NEC 2014, NEC 2017, and NEC 2020 section 690.12 and C22.1-2015 <br />Rule 64-218 Rapid Shutdown of PV Systems, for AC and DC conductors, when installed according to the manufacturer’s instructions. <br />IQ7-IQ7Plus-DS-02-EN-US-2023-04-14 <br />2060 N Tustin Ave - 101116106 & <br />20180500 <br />10/4/2023