Laserfiche WebLink
www.hilti.com <br />Hilti PROFIS Engineering 3.1.15 <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c ) 2003-2025 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan <br />7 <br />Company: <br />Address: <br />Phone I Fax: <br />Design: <br />Fastening point: <br /> | <br />CABINET ANCHORAGE <br />Page: <br />Specifier: <br />E-Mail: <br />Date: <br />7 <br />6/9/2025 <br />Coordinates Anchor [in.] <br />Anchor x y c-x c+x c-y c+y <br />1 -9.850 -12.250 ---- <br />2 9.850 -12.250 ---- <br />3 -9.850 12.250 ---- <br />4 9.850 12.250 ---- <br />7 Installation data <br /> Anchor type and diameter: Kwik Bolt TZ2 - CS 5/8 (3 1/4) <br /> hnom2 <br /> Profile: no profile Item number: 2210271 KB-TZ2 5/8x4 3/4 <br /> Hole diameter in the fixture: df = 0.687 in. Maximum installation torque: 481 in.lb <br /> Plate thickness (input): 0.394 in. Hole diameter in the base material: 0.625 in. <br /> Recommended plate thickness: not calculated Hole depth in the base material: 4.250 in. <br /> Drilling method: Hammer drilled Minimum thickness of the base material: 5.500 in. <br /> Cleaning: Manual cleaning of the drilled hole according to instructions for use is <br /> required. <br /> Hilti Æ 5/8 in Kwik Bolt TZ2 - CS with 3.75 in nominal embedment depth per ICC-ES ESR-4266 , Hammer drill bit installation per MPII <br />7.1 Recommended accessories <br />Drilling Cleaning Setting <br />• Suitable Rotary Hammer <br />• Properly sized drill bit <br />• Manual blow-out pump • Torque controlled cordless impact tool <br />• Torque wrench <br />• Hammer <br />AT&T <br />CLU3418 <br />14 of 39