137 SIGN COMPONENTS MANUAL (SAM)October 1, 201,3
<br />9. Marking - The following markings or equivalent shall be provided. Markings A and B'below shall be marked anywhere where
<br />readily visible during servicing.
<br />A. "Do not attempt to repair or service a damaged sign face. Fot servicing of this sign, contact 7 (Blank to be
<br />replaced by Applicant's Company name, City and State.)
<br />B. "Replace only with , Type ." (Blanks to be replaced by Applicant's Companyname and material type ordesignation.)
<br />SS LIGHT CO LTD E346996
<br />7 SINPUNG-DONG PALDAL-GU
<br /> SUWON-SI, GYEONGGI-DO 442-040 REPUBLIC OF KOREA
<br />Class 2 LED Modules, KPL, PPL, DPL, OSPL, CPL, OCPL, SPL40, SPL4, SPL(Wl), KRD, KBD, KGD, KYD, SDL, SDL(Wl),
<br />SPL, SPL6. SCPL, ODL, OPL, OPL40, OPL4, OPL6, KSL(Wl), KDL(Wl), CPL(Wl), KP[-4(Wl), JRGB3, KR40, KE340, KG40.
<br />CSL(Wl), CSR, CSB, CSG, WSL(Wl). WSR, V\/SB, WSG, WPL(Wl), KOL-le(Wl), KOL-20, KOL-2(4W1), KOR-2(1 KOB-2C,
<br />KOG-2Ci GPL, GPL(Wl), GRGBD, GRGB3, GRGB40, JGRGB3, GCS RGB, WGS RGB, WGRGB3. SSL(Wl). SCPL(Wl),
<br />SPL40(Wl), JSRGB3, SCSL, SCS[-(Wl), SCS RGB, WSSL, WSSL(Wl), WSS RGB, WSPL(Wl), WSL, GDL, GPL40, GPL40(W),
<br />EPL, GCPL, OPCB 5030 6 (3P), OPCB 5030 8 OP), PCB 5030 6 ( 18, PCB 5030 8 (3P), PCB 5030 6 ( 1 P) KP 1, PCB 5030 8 (3P)
<br />KP1, PCB 5030 6 (IP) KWL PCB 5030 8 OP) KWL RGB 5030 8 (313, LRGB 5030 10 (3P), PCB 5030 (3P) R, PCB 5030 (3P) B,
<br />PCB 5030 (38 G. PCB 4530 - le (214, PCB 4530 Wl - 1C (2P), PCB 4530 R - le (2P), PCB 4530 8 - le (2P), PCB 4530 G - 1C
<br />(2P)m PCB 4545 - 2C (3P). PCB 4545 Wl - 2C OP), PCB 4545 R - 20 (3Ph PCB 4545 B - 2C (3P), PCB 4545 G - 2C (3P), GPCB
<br />5030 8(3P), GPCB 5030 8 (3P) W, GRGB 5030 8 (3P), LGRGB 5030 10(3P). SPCB 5030 8 OP), SPCB 5030 8 (3P) W, A/L $18,
<br />A/L S30, ALL S60, A/L PP 18, A/L PP30, A/L PP60, A/l S 18 (Wl), A/L SJO (Wl), AIL S60 (Wl), A/L PP18 (Wl), A/L PP30
<br />(Wl), A/L PP6.0 (Wl), A/L. S 18(R), A/L 330(R), A/L 360(R), A/L PP 18(R), A/L PP30(R), A/L PP60(R), AIL 318(B), A/L
<br />330(B), A/L S60(8), A/L PP 1 8(B), A/L PP30(B), A/L PP60(B). A/L 318(G),A/L 330(G),A/L S60(G),A/L PP18(G),A/L
<br />PP30(G), A/L PP60(G), A/L RGB S18, A/L RGB S30, A/L RGB S60, A/L RGB P18, A/L RGB P30, A/L RGB PBO, A/L GS18, All-
<br />GS30, Al GSBO, A/L GPP18, A/L GPP30, A/L GPP60, All GS18 (Wl). A/L GS30 (Wl), A/L GS60 (Wl). A/L 'GPP18 (Wl),
<br />A/L GPP30 (Wl), A/L GPP60 (Wl), A/L GRGB Sl 8, A/L GRGB 830, A/L GRGB S60, At GRGB Pl 8, A/L GRGB P30, A/L
<br />GRGB P60, A/L SS18, A/L SS30, A/L SS60, A/L SPP 18, A/L SPP30. A/L SPP60, A/L SS 18 (Wl), A/l SS30 (Wl), A/L SS60
<br />(Wl), A/L SPP18 (Wl), A/L SPP30 (Wl), AIL SPP60 (Wl), WAL PP18, WAL PP30, WAL PP60, WAL PP 18 (Wl), AL PP30
<br />(Wl), WAL PP60 (Wl), WAL PP18(R), WAL PP30(R), WAL PP60(R). WAL PP18(B), WAL PP30(B), WAL PP60(B), WAI-
<br />PP 18(G), WAL PP30(G). WAL PP60(G), WAL RGB P18, WAL RGB P30, WAL RGB PBO, WAL GPP18, WAL GPP30, WAL
<br />GPP60, WAL GPP 18 (Wl). WAL GPP30 CAM), WAL GPP60 (Wl), WAL GRGB P18, WAL GRGB P30, WAL GRGB P60, WAL
<br />SPP18, WAL SPP30, WAL SPP60, WAL SPP18 (VV1). WAL SPP30 (Wl), WAL SPP60 (Wl)
<br />1. These products are only suitable for connection to a Class 2 power source rated 12 Volt DC or less.
<br />2. These products are intended for use only when connected to a power source that complies with Class 2 voltage=and energy
<br />limited circuit and is rated greater than 12 V DC.
<br />3. When these units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the' secondary or output
<br />rating of the Class 2 supply.
<br />4. These products are suitable for use in dry, damp and wet locations with supply sources rated at 12 Volts DC or less.
<br />5. These products are not required to be enclosed or protected from the weather in the end product.
<br />6. These products may be secured ih place in the end product by any means available.
<br />Marking: Company name or trademark SS LIGHT and product designation.
<br />STARTEC CO LTD E350879
<br />310-8 YUHYUN-RI
<br />YANGCHON-MYEON
<br />GIMPO-SI, GYEONGGI-DO 415-821 REPUBLIC OF KOREA
<br />Class 2 LED Module, R03-25KN.
<br />1. These products are only suitable for connection to a Class 2 power source rated 12 Volt DC or less.
<br />2. When these units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output
<br />rating of the Class 2 supply.
<br />3. These products are suitable for use in dry, damp and wet locations with supply sources rated at 12 Volts DC or less.
<br />4. These products are not required to be enclosed or protected from the weather in the end product.
<br />5. These products may be secured in place in the end product by any means available.
<br />SUNSIGNLED OPTO-ELECTRONICS CO LTD E359615
<br />2F BLDG B LAOBING INDUSTRY PARK
<br />ZHOUSHI RD
<br />SHIYAN TOWN BAOAN DISTRICT
<br />518108 SHENZHEN, CHINA
<br />Class 2 powered LED modules, Models IYX225U, IYX324U, IYX220U, IYX3404, IY)(326U, IYX332U, IY)<341 U, MYX112U,
<br />MYX120U, MYX 102U, MYX117U, where X and Y niay be replaced by any letter denoting LED color and type respectively.
<br />1. This product is only suitable for connection to a Class 2 power source, rated 12 Volt DC or less.
<br />2. This product has not been evaluated for use when connected to a power source that does not,comply with Class 2 voltage and
<br />energy limits and which is rated greater than electrical ratings.
<br />3. This Class 2 LED module is rated as noted in the electrical ratings tables. When units are connected to a Class 2 circuit, they
<br />are not to draw a total wattage of greater than the secondary or output rating of the Class 2 supply.
<br />4. This product is suitable for use in dry, damp and wet locations with supply sources rated at electrical ratings or less.
<br />5. This product is not required to be enclosed or protected from the weather in the end product.
<br />6. This product may be secured in place in the end products by any means available.
|