Laserfiche WebLink
103 SIGN COMPONENTSi MANUAL (SAM)October 1, 2013 <br />6 These products may be secured in place in the end product by any means available. <br />7. When these products are used in applications other.than'signs or outline lighting, the need to conduct aitemperature test shall <br />be considered. <br />OPTEK TECHNOLOGY INC E339817 <br />SUITE 130 <br />M S 411 <br />1645 WALLACE DR <br />CARROLLTON, TX 75006 <br />Class 2 LED Strips, Cat. Nos. OVM 12F3x7 Series OVM18F4x7 Series, OPA775, OPA776 and OVQ 12S30x7 Series. <br />1. These products are only suitable for connection ito a Class 2 power source, rated 12-24 Volts DC. <br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage <br />and energy limits. <br />3. These Class 2 LED modules are each rated as noted=in the. model list tables. When units are connected to a Class 2 circuit, <br />they are not to draw a total wattage of greater than the secondary or output rating of the Class 2 supply. <br />4. These products are suitable for use in dry, damp and wet locations'with supply sources rated at rated 12- 21.2 Volts DC. Model <br />OPA776 is suitable for use in dry and damp locations only. <br />5. These produlcts @re not required to be enclosed or protected from the weather in the end product. <br />ORDER-MATIC ELECTRONICS CORP <br />320 S BRYANT PL <br />E328326 <br />DEL CITY, OK 73115 <br />Class 2 LED Panel, Cat. No. Model MDMON. <br />1. These products are required to be enclosed in the end use sign. <br />2. These products are intended only for factory installation in new signs. <br />3. Grounding of frame to supply ground is required. Suitability of bonding for grounding connection is to be determined in final <br />application. <br />4. Suitability of LCD panel mounting shall be determined in final application. <br />5. In the end product, the LCD panel spacing to other heat producing components shall be minimum 2 inches spacing to sidewalls, <br />and minimum 2 inches spacing'to top of enclosure. <br />6. These products are 0nly suitable, for connection to a circuit from a Class 2 power source. <br />OSRAM SYLVANIA INC <br />54 CHERRY HILL DR <br />DANVERS, MA 01923 <br />E220096 <br />LED Array Drivers, Models OT3W/3500/120-240V, OT240/120-240/24/CH3, OT96/120-277/24, OT96/120-277/241 OT240/120- <br />240/24/CH, OT240/120-240/12/CH. OT25W/700€/UNV, OT20VW 1 OV/120-240V, OT17W/700(/UNV, OT1 7VW24V/UNV, <br />OT40W/14000/UNV, OT40/120-277/1050E, OT40/120-277/850E, OT25W/1040C/UNV, OT40W/11 10C/UNV. <br />1. These power supplies have multiple outputs. Power supply Model OT240/120-240/12/CH has a maximum of four Class 2 <br />outputs. Power supply Models 0T3/120-240/350 and OT240/120-240/24/CH have maximum three Class 2 outputs. Each output <br />of these power supplies have been evaluated to Class 2 output requirements for dc circuits. <br />2. These products with Class 2 outputs are suitable for use in dry, damp and wet locations. <br />3. Power supply spacing to other heat producing components shall be minimum 4 inches when minimum spacing to sidewalls and <br />top of enclosure is kept at minimum 2 inches. <br />4. When not marked for dry and damp locations only, all units shall be provided with liqUid tight fittings on the primary and <br />secondary circuits. <br />5. Cord connected (not cord and plug) models are suitable only for use in cord connected signs: <br />A) The suitability of the cord length, type, and temperature rating shall be determined in the end use. <br />B) Strain relief testing has been conducted at 20 lbs. The need for additional strain relief shall be determined in the end use. <br />C) Leakage current testing has not been conducted on the cord connected models and shall be conducted in the end use. <br />LED Array Drivers, Models OT25/120/10, OT50/120/10, OT75/120/24. <br />1. These power supplies have a maximum of one Class 2 output. The ootput of these power supplies has been evaluated to Class <br />2 output requirements for dc circuits. <br />2. These products with Class 2 outputs are suitable for use in dry and damp locations only. <br />3. In the end product, power supply spacing to other heat producing components shall be minimum 4 inches spacing to sidewalls, <br />and minimum 2 inches spacing to top of enclosure. <br />4. When used in a cord connected product, the need for conducting a leakage current test shall be considered in the end product. <br />5. These lead connected products are suitable for use in commercial application only when marked with 277 V input voltage. <br />OSRAM SYLVANIA INC E258264 <br />54 CHERRY HILL DR <br />DANVERS, MA 01923 <br />Class 2 LED Illumination Module, Cat. Nos. OS-LM01 A-X, OS-LM03A-X, where X may be replaced with any letters of the <br />alphabet A to Z, or any number from 0 to 9, or any combination of letter and numbers representing different LED colors ; <br />LINEAR/LM01 AAN3F/XXX and L#LRE/1 OV/XXX/LNRLT, where X can be any number from 0-9 indicating color temperature. <br />1. These products are only suitable for connection to a UL Listed or R/C (UYMR2), Component - Sign Accessory. <br />2. These products have; not been evaluated for use when connected to a power source that does not comply with Class 2 <br />requirements.