2350 S Pullman St - DEF - Exterior & Interior Framing - Plan

Home Browse Search

CITY OF SANTA ANA Planning and Building Agency ES IMES Evaluation Report ESR-3064P FBC Rei: This report is subject to renew www.icc-es.org 1 (800) 423-6587 1 (562) 699-0543 A Subsidiary of the Internation. DIVISION: 05 00 00—METALS Section: 05 40 00--Cold-Formed Metal Framing Section: 05 41 00—Structural Metal Stud Framing Section: 05 42 00—Cold-Formed Metal Joist Framing DIVISION: 09 00 00—FINISHES Section: 09 22 16.13—Nonstructural Metal Stud Framing REPORT HOLDER: STEEL STUD MANUFACTURERS ASSOCIATION (SSMA) EVALUATION SUBJECT: SSMA COLD -FORMED STEEL FRAMING 1.0 REPORT PURPOSE AND SCOPE A UANCE uppplerrment fagtep IU�: 2023 F_ebruary 2025. Purpose: The purpose of this evaluation report supplement is to indicate that SSMA Cold -Formed Steel Framing, described in ICC-ES evaluation report ESR-3064P, has also been evaluated for compliance with the codes noted below. Applicable code editions: ■ 2014 Florida Building Code —Building ■ 2014 Florida Building Code —Residential 2.0 CONCLUSIONS The SSMA Cold -Formed Steel Framing, described in Sections 2.0 through 7.0 of the evaluation report ESR-3064P, complies with the 2014 Florida Building Code —Building and the 2014 Florida Building Code —Residential, provided the design and installation are in accordance with the International Building Code® (IBC) provisions noted in the evaluation report. Use of the SSMA Cold -formed Steel Framing has also been found to be in compliance with the High -Velocity Hurricane Zone provisions of the 2014 Florida Building Code —Building and the 2014 Florida Building Code —Residential. Exception 1: On pages 7 through 18, of the SSMA Product Technical Guide (Attached to ESR-3064P), members noted with Footnote 2 include cold work of forming in the allowable moment and have not been evaluated for compliance with the High - Velocity Hurricane Zone provisions of the Florida Building Code —Building and the Florida Building Code —Residential. Exception 2: Members with a base metal thickness of less than 0.0296 inch (0.752 mm) and a coating less than G90 have not been evaluated for compliance with the High -Velocity Hurricane Zone provisions of the Florida Building Code —Building and the Florida Building Code —Residential. For products falling under Florida Rule 9N-3, verification that the report holder's quality -assurance program is audited by a quality -assurance entity approved by the Florida Building Commission for the type of inspections being conducted is the responsibility of an approved validation entity (or the code official when the report holder does not possess an approval by the Commission). This supplement expires concurrently with the evaluation report, reissued March 2023. ICC-ES Evaluation Reports are not to be construed as representing aesthetics or any other attributes not specifical(v addressed, nor are thev to be construed as an endorsement of the subject of the report or a recommendation for its use. There is no warranty by ICC Evaluation SerWce, LLC, express or implied, as to any finding or other matter in this report. or as to anv product covered by the report. Copyright © 2023 ICC Evaluation Service, LLC. All rights reserved. Page 6 of 6