2350 S Pullman St - DEF - Exterior & Interior Framing - Plan

Home Browse Search

CITY OF SANTA ANA Planning and Building Agency NCE The Steel Framing Industry Association (SFIA) was formed with the objective of assisting companie hWj@19r(erests in the cold -formed steel framing industry to be more successful by unifying the industry to expand them 6gtttpr the use of cold formed steel systems through: (a) Quality Assurance (b) Promotion (c) Advocacy (d) Education (e) Innovation The SFIA developed this Industry leading product technical guide to comply with the latest building codes and standards. The data in this catalog based on the American Iron and Steel Institure's AISI 5100-16/S2-20 "North American Specification for the Design of Cold -Formed Steel Structural Members and meets the requirements of the 2021 International Building Code (IBC). While building codes vary byjurisdiction, this program follows the most recent international standards published by the International Code Council. Material Specification Products manufactured by SFIA members are formed from steel with a minimum yield stress of 33 or 50 kips per square inch (ksi). Unless noted otherwise, all products covered in this SFIA catalog are engineered to meet the 2016 edition of the Ameri- can Iron and Steel Institute (AISI) 5100-16/52-20, "North American Specification of the Design of Cold -Formed Steel Structural Members"and other AISI standards referenced in Section 2210 of the 2021 International Building Code (IBC-2021). The structural properties in this SFIA catalog have been computed based on allowable stress design (ASD) which includes distortional buck- ling considerations for all Stud Sections. For fastener tables, screw sizes and head diameters do not refer to specific fasteners which may or may not be available from SFIA member companies. Shear and tension data for screws was developed using published manufacturer data and evaluation reports available at the time of publications. Disclaimer A concerted effort has been made to ensure the accuracy of the technical data represented in this catalog. The Steel Framing Industry Association makes no representation, warranty, or guarantee in connection with this technical data and expressly disclaims any liabil- ity or responsibility for failure resulting from the use or misapplication of computations, detail drawings and specifications contained herein. All data, specifications and details contained in this catalog publications are intended as a general guide for using SFIA mem- ber companies products. These products should not be used in design or construction without an independent evaluation by a quali- fied engineer or architect to verify the suitability of a particular product for use in a specific application. This publication contoines the latest information available at the time of printing. The SFIA and its member companies reserve the right to make modifications and/ or change materials of any of their products without prior notice or obligation. For the latest information regarding a particular manu- facturer's products contact that manufacturer. All SFIA manufacturers may not produce all of the products listed in this catalog. Please contact manufacturer to verify product availoblity. Copyright ©2023 Steel Framing Industry Association