Laserfiche WebLink
18- ©Mfie;to, <br />Zep Solar ZS COMP I GROUNDING AND BONDING <br />Ground Zep <br />Set screw <br />Keyside <br />The Ground, Zep provides a single point of connection for <br />the Equipment Grounding Conductor (EGG Irom the array <br />loa building ground <br />Ground wire channel <br />Part No 850-1172 <br />UL Listed to UL 467 and UL 2703 <br />Ground Zep Installation <br />Insert Ground Zep into Zep Grooveol module frame <br />onarrayperimeter <br />Use the flat Too to rotate the Ground Zer) 90 degrees go that set screw Insert copper EGC into ground wire <br />is Pointing straight up channel Tighter, set Screw uSing torque <br />values shownin theZS Co mB Insta[[a· <br />tion Manual <br />Bonding Path - Array to Ground <br />t.,A»@S#%94·,·,MG»* Ground Zep <br />Equipment Ground <br />- Conductor <br />* Bonding path <br />, 0/ <br />Down rool <br />Document 800-1478-001 Rev A www.zepsolar.com <br />©2013/EN Ze p Solar, Inc Zep Solar reserves the right to makespecifications chnages wilthout amy prior notice.Allrightsreserved <br />Date LastExported: June25.2013 4.45 PM <br />PAGE: 5 of 5 <br />r