Laserfiche WebLink
Sheet No.:02 <br />Electrical/Optical Characteristics at TA=25t(VIN=DC12VAC, 50Hz) <br />Colour Voltage Current Power CT/WL Lumin.ous Ra <br />WW DC12V 20mA 0.6W 3000-3300K ------ 64 <br />CW DC12V 20mA 0.6W 8000-9000K ------ 83 <br />R DC12V 20mA 0.6W 620-630nm ------ ------ <br />G DC12V 20mA 0.6W 520-525nm ------ ------ <br />P DC12V 20mA 0.6W 380-760nm ------ ------ <br />Y DC12V 20mA 0.6W 585-595nm ------ ------ <br />Maximum <br />'Connection <br />100Pcs <br />100Pcs <br />100Pcs <br />100Pcs <br />100Pcs <br />100Pcs <br />illuminated diagram <br />90° <br />9oooo., 80%6096 4096 20%0%2096 4096 8096 too·:6 <br />INSTALLATION <br />50% <br />1.Please rip PE adhesive tape on the back of the <br />product, then stick to the oblects where you want. <br />2.Use the screws to fasten it again. <br />MAX 100PCS <br />Power .F EDC12V -1- <br />0 <br />3.Connect multiple product (max 100 pcs), (The tatal power consumption of products should be less than 80% of <br />driver's power),the connect the driver. <br />• Connect red wire to the positive polarity and black wire to the negative polarity of power supply <br />• Operate on 12 Volt DC Power Supply(constant voltage) <br />• Wire length of powersupplyshould be no more than 3 meters;if more than that,suggest increasing wirediameter