Laserfiche WebLink
<br />Rev: 08/30//2019 Page 2 of 2 <br />Compliance with the California Electrical Code: <br /> <br />A. Does the plan include EVCS manufacturer's specs and installation guidelines? Y N <br />B. Does the electrical plan identify the amperage and location of existing electrical <br />service panel? Y N <br />CEC 625.43 Y N <br />Y N <br />CEC 300.5 Y N <br /> <br />Compliance with the California Green Building Standards Code (CGBSC): <br /> <br />A. Do the CAL Green EV Readiness installation requirements apply to this project? Y N <br />CGBSC Table 5.106.5.3.3 Y N <br />CGBSC <br />5.106.5.3.1 for single charging spaces or CGBSC 5.106.5.3.2 for multiple charging <br /> <br />Y <br /> <br />N <br /> <br />Compliance with California Building Code, Chapter 11B for Accessibility Features: <br /> <br />B. Do the plans clearly depict all required accessible EVCS features for the disabled? Y N <br />Table 11B-228.3.2.1? Y N <br />11B- <br />812 Figure 11B-812.9? Y N <br /> <br />Notes: This criteria is intended for an expedited EVCS permitting process. If any items are checked NO, <br />please revise plans to fit within the eligibility checklist; otherwise the permit application may go <br />through the standard plan review and approval process. <br /> <br />Electrical plans shall be completed, stamped and signed by a California Licensed Electrical Engineer <br />or a C-10 electrical contractor. <br /> <br />EVCS project review is limited to health and safety requirements found under local, state, and federal <br />law. EVCS permit approval is not subject to approval of an association (as defined in Section 4080 of <br />the Civil Code). <br /> <br />Project Address: <br />Applicant Signature: <br />Applicants Printed Name: <br /> <br />Contractor’s License Number and type: -