Laserfiche WebLink
400 Sunrise Ave., Suite 270 <br />Roseville, CA 95661 <br />916.755.3571 <br />MiTek, Inc. <br />Re: <br />The truss drawing(s) referenced below have been prepared by MiTek USA, Inc. under my direct supervision <br />based on the parameters provided by Precision Truss, Inc.. <br />August 27,2025 <br />Reinmuth, Dustin <br />Pages or sheets covered by this seal: R89895389 thru R89895500 <br />My license renewal date for the state of California is September 30, 2026. <br /> 25-0691-001 <br />Raising Cane's #C1032 <br /> <br /> <br /> <br />IMPORTANT NOTE: The seal on these truss component designs is a certification <br />that the engineer named is licensed in the jurisdiction(s) identified and that the <br />designs comply with ANSI/TPI 1. These designs are based upon parameters <br />shown (e.g., loads, supports, dimensions, shapes and design codes), which were <br />given to MiTek or TRENCO. Any project specific information included is for MiTek's or <br />TRENCO's customers file reference purpose only, and was not taken into account in the <br />preparation of these designs. MiTek or TRENCO has not independently verified the <br />applicability of the design parameters or the designs for any particular building. Before use, <br />the building designer should verify applicability of design parameters and properly <br />incorporate these designs into the overall building design per ANSI/TPI 1, Chapter 2.