Laserfiche WebLink
October 1, 2013 SIGN COMPONENTS MANUAL (SAM) 90 <br />6. The suitability of the diffuser to serve as a barrier or endosure shall be determined in the end use product. Consideration for <br />addressing electrical, flammability, and mechanical properties shall be given. <br />LOUISVILLE LAMP CO <br />3316 GILMORE INDUSTRIAL BLVD <br />E352989 <br />LOUISVILLE, KY 40213 <br />Class 2 LED light board, Models LB-3624A, LB-3624B, LB-3624C. <br />1. These products are only suitable for connedion to a Class 2 power source rated 12 Volt DC or less. <br />2. These products has not been evaluated for use when connected to a power source that does not comply with Class 2 voltage and <br />energy limited circuit and which is rated greater than 12V DC. <br />3. When units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output rating of the <br />Class 2 supply. <br />4. These products are suitable for use in dry, damp and wet locations with supply sources rated at 12 Volts DC or less. <br />5. These products are not required to be enclosed or protected from the weather in the end product. <br />6. When these products are used in applications other than signs the need to conduct a temperature test shall be considered. <br />7. These products cannot be wired in series. <br />LUCKY VALLEY TECHNOLOGY (SHENZHEN) CO LTD <br />NORTHERN DIST OF SCIENCE & TECH PARK <br />3 QIONG YU RD, 1 WORKSHOP, 6RT <br />NAN SHAN DISTRICT <br />E347782 <br />SHENZHEN, GUANGDONG 518000 CHINA <br />Class 2 Output LED Driver, Model RG180-W3V012SD0. <br />1. The output (Red/Black) of each unit complies with Class 2 criteria of UL 1310. <br />2. The device is provided with 18 AWG input and output leads. The suitability of input and output connections shall be determined <br />in end-use application. <br />3. The suitability of grounding means shall be determined by end product. <br />4. The device is not intended for field wiring used. <br />5. The device is intended to be connected to a maximum 20 A branch circuit. <br />6. The devices are of the constant current type that requires the proper number of LED modules and controllers that does not <br />exceed the maximum output voltage/current. <br />7. The measured maximum external enclosure temperature (Tc) is 77.2 degree C when the room ambient temperature are 60 <br />degree C. The suitability shall be determined in end application. <br />8. The devices employ input surge suppression protection, Cat. No. S14K385E2K1 under UL File E321126, which is intended <br />end-use SPD type 2. The suppressed voltage rating is 385 Vac. The suitability of use of this component shall be determined <br />in the end-product application. <br />9. No mechanical test has been conducted for the models and the metal chassis is considered as dead metal. The devices shall <br />be mounted in the intended manner in an enclosure, having adequate strength and thickness with acceptable spacing being <br />provided. <br />10. The device has been evaluated for dry and damp locations use only. <br />11. In the end product, LED driver spacing to other heat producing components shall be minimum 2 inches spacing to sidewalls, <br />and minimum 2 inches spacing to top of enclosure. <br />12. In the end product, LED Drivers shall be located not less than 1 inch (25.4mm) apart when arranged end-to-end, and not less <br />than 4 inches (102mm) apart when arranged otherwise. <br />PLUCKYSTAR ELECTRONIC TECHNOLOGY CO LTD <br />10 FUSHENG RD HECHENG ST <br />GAOMING DISTRICT <br />E320022 <br />FOSHAN, GUANGDONG 528500 CHINA <br />LED Modules, Models LS0723x, LS0766x, LS0769x, LS0776x, LS0782x, LS0783x, and LS-KM02-x where that x may be R, G, B, <br />Y, CW, VWV, P or O indicating LED Color. <br />1. These products are only suitable for connection to the output of a UL Listed or R/C Class 2 Power Supply rated 12VDC. <br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 <br />requirements. <br />3. These products are rated per the Table on Page 2. When units are connected to a Class 2 circuit, their number is to be limited to <br />draw a total wattage of no greater than the secondary current rating of each Class 2 power supply. <br />4. These products are suitable for use in dry, damp and wet locations without additional enclosures. <br />LED Modules, Models LS0766HD, LS0791 R and LS0791 H. <br />1. These products are only suitable for connection to the output of a Class 2 power source. <br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 <br />requirements. <br />3. The LED modules are rated as noted in the electrical ratings table. When units are connected to a Class 2 circuit, they are not to <br />draw a total wattage of greater than the secondary or output rating of the Class 2 supply. <br />4. These products are suitable for use in dry, damp and wet locations with supply sources rated at electrical ratings or less. <br />5. These products are not required to be enclosed or protected from the weather in the end product. <br />6. These products may be secured in place in the end products by any means available. <br />Class 2 LED modules, designated as LSXXXX-YY series, where XXXX and YY may be combinations of any numbers. <br />1. These products are only suitable for connection to a Class 2 power source rated 24 Volt DC or less. <br />2. These products are intended for use only when connected to a power source that complies with Class 2 voltage and energy <br />limited circuits.