Laserfiche WebLink
Sheet No. : 02 <br />Electrical/Optical Characteristics at TA=25t(VIN=DC12VAC, 50Hz) <br />Colour Voltage Current Power CT/WL 3Luminous Ra <br />WW DC12V 20mA 0.6W 3000-3300K ------ 64 <br />Maximum <br />Connection <br />100Pcs <br />CW DC12V 20mA 0.6W 8000-9000K ------ 83 100Pcs <br />R DC12V 20mA 0.6W 620-630nm ------ ------100Pcs <br />G DC12V 20mA 0.6W 520-525nm ------ ------100Pcs <br />P DC12V 20mA 0.6W 380-760nm ------ ------100Pcs <br />Y DC12V 20mA 0.6W 585-595nm ------ ------100Pcs <br />illuminated diagram <br />00 <br />60°60° <br />90° <br />90'10016 BON 40%20,6 096 201· 4096 6096 80%100% <br />INSTALLATION <br />i 60% <br />1.Please rip PE adhesivetape on the back of the <br />product, fhen stickto the obiects where you Want. <br />2.Use the screws to fasten it again. <br />MAX 100PCS <br />PowerDCUV ===== <br />3.Connectmultipleproduct (max 100 pcs), (The tatal powerconsumption of products should be lessthan 80% of <br />driver's power),the connect the driver. <br />• Connect red wire to the positive poiarity and blackwire to the negative polarity of power supply <br />• Operate on 12 Volt DC Power Supply(constant voltage) <br />• Wire length of powersupply should be no more than 3 meters;if more than that,suggest increasing wire diameter