10181412_2926 S. RENE - Plan - Laserfiche WebLink

Home Browse Search

WARNING ELECTRIC SHOCK HAZARD TERMINALS ON BOTH THE LINE AND LOAD SIDE MAY BE ENERGIZED IN THE OPEN POSITION WARNING INVERTER OUTPUT CONNECTION DO NOT RELOCATE THIS OVERCURRENT DEVICE WARNING: DIRECT CURRENT PHOTOVOLTAIC POWER SOURCE DISCONNECT DC Operating Parameters:A Max. System Voltage:419V Maximum Current:11.13A Rated Vmp:321 V Rated Imp:8.42 A DIRECT CURRENT PHOTOVOLTAIC POWER SOURCE DISCONNECT At each junction box, combiner box, disconnect, and device where energized, ungrounded circuits may be exposed during service: (NEC 690.35(F)) WARNING ELECTRIC SHOCK HAZARD. THE DC CONDUCTORS OF THIS PHOTOVOLTAIC SYSTEM ARE UNGROUNDED AND MAY BE ENERGIZED. This Service is fed by multiple power sources. Disconnect all sources prior to servicing this equipment. Generation system AC Disconnect is Interconnect Breaker. OPERATING VOLTAGE = 240 V MAXIMUM CURRENT = 16 A No. C58724 4 \* Exp. 3-31-15 // 41€GM23:;>' DC Operating Parameters: Max. System Voltage: Maximum Current: Rated Vmp: Rated Imp: W. 411 X 251 V 11.13A 193 V 8.42 A Signage: Signage material shall be reflective, weather-resistant material suitable for the environment. All signage shall fall within the format: White Lettering on a Red Background Minimum 3/8" Letter Height All Letters Shall be Capitalized Arial or Similar Font, Non-Bold On Main Service Disconnect: Sign may be placed within the main service disconnect. The sign shall be placed on the outside cover if the main service disconnect is operable with the service panel closed. "CAUTION: SOLAR ELECTRIC SYSTEM Notes: 1. Utility is 120V/240V 1 03\N. O 0 2. PV System is Utility Interactive. 0 - 3. Inverter is fully compliant with NEC 690.61 R zg! concerning Lack of Interactive System Power.0- N 4. All PV system components shall be listed by a 8 <6 recognized testing agency.m " 5. Wiring material shall be suitable for the sun exposure and wet locations. 6.Where the terminal of the disconnecting means may 4 be energized in the open position, a warning sign shall be mounted on or adjacent to the disconnecting means.(1) The sign shall be clearly legible and have the following 06 >CD words or equivalent: "WARNING - ELECTRIC SHOCK HAZARD, DO NOT TOUCH TERMINALS. TERMINALS E I a u ON BOTH THE LINE AND LOAD SIDES MAY BE (0 0 04 ENERGIZED IN THE OPEN POSITION."C cou 7. Signs shall be posted adjacent to each PV disconnect .2 (D (Dand inverter to indicate, "Photovoltaic System". 8. All PV modules and associated equipment and wiring material shall be protected from any physical damage.c (1) Uj <1 9. In one- and two-family dwelling, live parts in PV .59 CE cr source circuits and PV output circuits over 150 Volts to L CD 4- ground shall not be accessible to other than qualified (1) c (\1 C persons while energized.li c o 10. All field installed junction, pull and outlet boxes 1-<C\'U: located behind modules or panels shall be accessible Rev Date directly or by displacement of a module(s) or panel(s) secured by removable fasteners. 11. Pressure terminals tightened to the recommended torque specification 12. Crimp-on terminals listed and installed with listed crimping tools by the same manufacturer. 13. User accessible fuses in "touch-safe" holders or capable of being changed without touching live contacts. 2 www. Loyd W Martin .com Solar Structures Engineering #2014-723 Structural Only CONNECTED" On DC Conduit, Raceways, Enclosures, Cable Assemblies, DC Combiners and Junction Boxes: Markings shall be placed every 10 feet on all interior and exterior DC conduits, raceways, enclosures, and cable assemblies, at turns above and / or below penetrations, all DC combiners, and junction boxes. "WARNING: PHOTOVOLTAIC POWER SOURCE" |REI No. C 58724 6,1(*322!.'Til)«OF-CAL\F¢*Drawn By: Sunny Date: 05/12/2014 Sheet: PV-5 NOTES AND SIGNAGE V V --