Laserfiche WebLink
400 Sunrise Ave., Suite 270 <br />Roseville, CA 95661 <br />916.755.3571 / MiTek-US.com <br />Design valid for use only with MiTek® connectors. This design is based only upon parameters shown, and is for an individual building component, not <br />a truss system. Before use, the building designer must verify the applicability of design parameters and properly incorporate this design into the overall <br />building design. Bracing indicated is to prevent buckling of individual truss web and/or chord members only. Additional temporary and permanent bracing <br />is always required for stability and to prevent collapse with possible personal injury and property damage. For general guidance regarding the <br />fabrication, storage, delivery, erection and bracing of trusses and truss systems, see ANSI/TPI1 Quality Criteria and DSB-22 available from Truss Plate Institute (www.tpinst.org) <br />BCSI Building Component Safety Information <br />WARNING - Verify design parameters and READ NOTES ON THIS AND INCLUDED MITEK REFERENCE PAGE MII-7473 rev. 1/2/2023 BEFORE USE. <br />and available from the Structural Building Component Association (www.sbcscomponents.com) <br />MII-TOENAIL <br />NOTES: <br /> 1. TOE-NAILS SHALL BE DRIVEN AT AN ANGLE OF 30 DEGREES WITH THE MEMBER <br /> AND STARTED 1/3 THE LENGTH OF THE NAIL FROM THE MEMBER END AS SHOWN. <br /> 2. THE END DISTANCE, EDGE DISTANCE, AND SPACING OF NAILS SHALL BE SUCH <br /> AS TO AVOID UNUSUAL SPLITTING OF THE WOOD. <br /> 3. ALLOWABLE VALUE SHALL BE THE LESSER VALUE OF THE BOTTOM CHORD SPECIES <br /> FOR MEMBERS OF DIFFERENT SPECIES. <br />LATERAL TOE-NAIL DETAIL <br />L <br />L/3 <br />30.00° <br />SIDE VIEW <br />(2x3) <br />2 NAILS <br />FAR SIDE <br />NEAR SIDE <br />L/2 <br />L/2 <br />45.00° <br />45.00° <br />SIDE VIEW <br />(2x3) <br />2 NAILS <br />NEAR SIDE <br />NEAR SIDE <br />45 DEGREE ANGLE <br />BEVEL CUT <br />SQUARE CUT <br />SIDE VIEW <br />(2x4) <br />3 NAILS <br />FAR SIDE <br />NEAR SIDE <br />NEAR SIDE <br />SIDE VIEW <br />(2x4) <br />3 NAILS <br />NEAR SIDE <br />NEAR SIDE <br />NEAR SIDE <br />TOE-NAIL SINGLE SHEAR VALUES PER NDS 2018 (lb/nail) <br />3. <br />5 <br />" <br /> <br />L <br />O <br />N <br />G <br />3. <br />2 <br />5 <br />" <br /> <br />L <br />O <br />N <br />G <br />3. <br />0 <br />" <br /> <br />L <br />O <br />N <br />G <br />DIAM.SP SPFDFHF SPF-S <br />.131 <br />.128 <br />.128 <br />.135 <br />.131 <br />.131 <br />.162 <br />.148 <br />.148 <br />.120 <br />118.3 108.3 93.9 91.9 80.2 <br />63.4 <br />59.768.4 <br />72.6 <br />69.9 <br />74.2 <br />80.6 <br />85.6 <br />88.1 <br />93.5 <br />106.6 97.6 84.7 82.8 72.3 <br />59.7 <br />57.065.3 <br />68.4 <br />66.7 <br />69.9 <br />76.9 <br />80.6 <br />84.1 <br />88.1 <br />88.1 80.6 69.9 68.4 59.7 <br />57.0 <br />50.157.4 <br />65.3 <br />58.7 <br />66.7 <br />67.6 <br />76.9 <br />73.9 <br />84.1 <br />106.6 97.6 84.7 82.8 72.3 <br />VALUES SHOWN ARE CAPACITY PER TOE-NAIL. <br />APPLICABLE DURATION OF LOAD INCREASES MAY BE APPLIED. <br />EXAMPLE: <br />(3) - 16d (0.162" X 3.5") NAILS WITH SPF SPECIES BOTTOM CHORD <br />For load duration increase of 1.15: <br />3 (nails) X 91.9 (lb/nail) X 1.15 (DOL) = 317.0 lb Maximum Capacity <br />VIEWS SHOWN ARE FOR <br />ILLUSTRATION PURPOSES ONLY <br />MiTek USA, Inc.Page 1 of 1 <br />NEAR SIDE <br />NEAR SIDE <br />NEAR SIDE <br />SIDE VIEW <br />(2x6) <br />4 NAILS <br />NEAR SIDE <br />NEAR SIDE <br />NEAR SIDE <br />FAR SIDE <br />SIDE VIEW <br />(2x6) <br />4 NAILS <br />FAR SIDE <br />A MiTek Affiliate <br />ENGINEERED BY <br />SEPTEMBER 1, 2021 <br />December 19,2024