My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
HOLD - 910 E Warner Ave - Trusses - Plan
PBA
>
Building
>
ProjectDox
>
W
>
Warner Ave
>
910 E Warner Ave
>
HOLD - 910 E Warner Ave - Trusses - Plan
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
11/13/2025 12:19:16 PM
Creation date
11/5/2025 5:00:05 AM
Metadata
Fields
Template:
Plan
Permit Number
102122458
Full Address
910 E Warner Ave
Street Number
910
Street Direction
E
Street Name
Warner
Street Suffix
Ave
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
20
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
400 Sunrise Ave., Suite 270 <br />Roseville, CA 95661 <br />916.755.3571 <br />MiTek, Inc. <br />Re: <br />The truss drawing(s) referenced below have been prepared by MiTek USA, Inc. under my direct supervision <br />based on the parameters provided by Stone Truss, Inc.. <br />September 4,2025 <br />Zhao, Xiaoming <br />Pages or sheets covered by this seal: R90031374 thru R90031382 <br />My license renewal date for the state of California is September 30, 2026. <br /> 250727-Roof <br />T308060 Cohen Garage <br />IMPORTANT NOTE: The seal on these truss component designs is a certification <br />that the engineer named is licensed in the jurisdiction(s) identified and that the <br />designs comply with ANSI/TPI 1. These designs are based upon parameters <br />shown (e.g., loads, supports, dimensions, shapes and design codes), which were <br />given to MiTek or TRENCO. Any project specific information included is for MiTek's or <br />TRENCO's customers file reference purpose only, and was not taken into account in the <br />preparation of these designs. MiTek or TRENCO has not independently verified the <br />applicability of the design parameters or the designs for any particular building. Before use, <br />the building designer should verify applicability of design parameters and properly <br />incorporate these designs into the overall building design per ANSI/TPI 1, Chapter 2. <br />x <br />AW OCT. 13, 2025
The URL can be used to link to this page
Your browser does not support the video tag.