Laserfiche WebLink
www.hilti.com <br />Hilti PROFIS Engineering 3.1.19 <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c ) 2003-2025 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan <br />2 <br />Company: <br />Address: <br />Phone I Fax: <br />Design: <br />Fastening point: <br />Landscape Structures Inc. <br />8131 Forney Rd. <br /> | <br />CP042041 STD-5 12.75 Rev 2 <br />Page: <br />Specifier: <br />E-Mail: <br />Date: <br />2 <br />felipepena@playlsi.com <br />8/11/2025 <br />1.1 Design results <br />Case Description Forces [kip] / Moments [ft.kip]Seismic Max. Util. Anchor [%] <br />1 Combination 1 N = 4.607; Vx = -8.082; Vy = 8.076; <br />Mx = -91.13000; My = -91.19000; Mz = 0.00000; <br />no 72 <br />2 Load case/Resulting anchor forces <br />Anchor reactions [kip] <br />Tension force: (+Tension, -Compression) <br />Anchor Tension force Shear force Shear force x Shear force y <br />1 19.619 2.856 -2.021 2.019 <br />2 56.437 2.856 -2.021 2.019 <br />3 0.000 2.856 -2.021 2.019 <br />4 19.650 2.856 -2.021 2.019 <br />Max. concrete compressive strain: 0.76 [‰] <br />Max. concrete compressive stress: 3,303 [psi] <br />Resulting tension force in (x/y)=(4.499/-4.494): 95.707 [kip] <br />Resulting compression force in (x/y)=(-7.285/7.283): 91.100 [kip] <br /> Anchor forces are calculated based on the assumption of a rigid anchor plate. <br />3 Tension load <br />Load Nua [kip]Capacity f Nn [kip]Utilization bN = Nua/f Nn Status <br /> Steel Strength*56.437 79.312 72 OK <br /> Pullout Strength*56.437 78.574 72 OK <br /> Concrete Breakout Failure**1 N/A N/A N/A N/A <br /> Concrete Side-Face Blowout, direction **N/A N/A N/A N/A <br /> * highest loaded anchor **anchor group (anchors in tension) <br />1 Tension Anchor Reinforcement has been selected! <br />THESE LOADS ARE THE <br />SUPPORT FORCES ON <br />NODE 14