Laserfiche WebLink
A Model - Location 3 <br />B Model - Parameters 3 <br />C Model - Base Data 3 <br />D Load Cases & Combination Settings 3 <br />1 Basic Objects 4 <br />1.1 Materials 4 <br />1.2 Sections 4 <br />1.3 Thicknesses 7 <br />1.4 Lines 7 <br />1.5 Members 7 <br />1.5.1 Members - Deflection Check - Segments 8 <br />1.6 Surfaces 8 <br />2 Special Objects 8 <br />2.1 Structure Modifications 8 <br />2.1.1 Structure Modifications - Deactivate Objects 8 <br />3 Types for Nodes 9 <br />3.1 Nodal Supports 9 <br />4 Imperfections 9 <br />4.1 Imperfection Cases 9 <br />4.1.1 Imperfection Cases 9 <br />4.2 Local Imperfections 9 <br />4.2.1 IC1 9 <br />4.2.1.1 Member Imperfections 9 <br />4.2.1.1.1 Member Imperfections - Parameters 9 <br />5 Load Cases & Combinations 9 <br />5.1 Load Cases 9 <br />5.1.1 Load Cases - Wind Simulation 11 <br />5.1.2 Load Cases - Wind Tunnel 11 <br />5.2 Actions 13 <br />5.3 Design Situations 13 <br />5.4 Action Combinations 13 <br />5.5 Load Combinations 17 <br />5.5.1 Load Combinations - Included Load Cases 23 <br />5.6 Static Analysis Settings 26 <br />5.7 Wind Simulation Analysis Settings 27 <br />5.8 Combination Wizards 27 <br />5.8.1 Combination Wizards - Initial State Items 28 <br />6 Load Wizards 28 <br />6.1 Wind Profiles 28 <br />6.1.1 Wind Profile - Parameters 28 <br />7 Loads 28 <br />7.1 LC1 - Prestress 28 <br />7.1.1 Member Loads 29 <br />7.1.2 Surface Loads 29 <br />7.2 LC2 - Dead Load 29 <br />7.2.1 Member Loads 29 <br />7.3 LC3 - Snow 29 <br />7.3.1 Surface Loads 29 <br />7.4 LC9 - Uplift 29 <br />7.4.1 Surface Loads 29 <br />8 Guide Objects 29 <br />8.1 Coordinate Systems 29 <br />9 Parts List 30 <br />9.1 Parts List - All by Material 30 <br />10 Static Analysis Results 30 <br />10.1 Summary 31 <br />10.2 Nodes - Support Forces 74 <br />10.3 Members - Internal Forces by Section 97 <br />11 Results of Wind Simulation Analysis 111 <br />11.1 Summary 111 <br />12 Steel Design 113 <br />12.1 Objects to Design 113 <br />12.2 Design Situations 113 <br />12.3 Materials 113 <br />12.4 Sections 113 <br />12.5 Strength Configurations 114 <br />12.5.1 Strength Configurations - Settings 114 <br />12.6 Serviceability Configurations 115 <br />12.6.1 Serviceability Configurations - Settings 115 <br />12.7 Seismic Configurations 115 <br />12.7.1 Seismic Configurations - Settings 115 <br />12.8 Results 116 <br />12.8.1 Design Ratios on Members by Member 116 <br />12.8.2 Steel Design: Max. of all design checks, 117 <br />Serviceability Limit State, Strength Limit State, In <br />Axonometric Direction <br />13 Design Overview 118 <br />13.1 Design Overview 118