Laserfiche WebLink
*,,SANTA <br />NA,'Iffi <br />Plannlng & Bullding Agency <br />BuildinE Srtoly Division <br />20 Clvlc Center Plaza <br />P.O. Box 1988 (M.19) <br />Sant Ana, CA 92702 <br />(7r4) 647-5800 <br />www.santa€na.olg <br />RESIDENTIAL <br />PHOTOVOLTAIC <br />CHECKLIST <br />- <br />sol-01 csc 2013 <br />Solar Photovoltalc (PV) Checklist for Oetached StNcLE FAMTLY RESTDENCES Onty <br />lnstruclions: Thg licensed contractor of record shall complete all seclions, answer the len questions and <br />sign the certification section below. A copy of this form shall be attach€d to each <br />anv of the ouestions. Dlan check <br />of TWO sets of plans, of <br />shall be requlred.minimum 1 'l'' x 17" size. lf answerino NO <br />Project Address:604 RAITT ST, SANTA ANA, CA 92706 <br />Contractor Company Name:SOUTHWEST SUN SOLAR, INC <br />contractorLicenseNumber: 1004667 <br />YES NO <br />1. 8tr <br />2. Etr <br />3. Eltr <br />Aro lhe followlng applicable to tho proposed project? <br />Will the PV system layout provide the required three-foot wide clear accsss pathways <br />per Seclion 605.1 1 of the Califomia Fire Code, and is this shown on the roof plan? <br />Will ths PV systsm be installod on a roof having only one roollng layer with no <br />ovedays? <br />Will the PV anay be flush mounted to the existing roof so that the plane of the <br />modulas (panels) are parall6l to the plane of th8 roof? <br />Will the PV system weigh maximum 4 pounds per square feel or less? <br />Will the PV system be installed where tha modules do not overhang any roof edges <br />(such as eaves, gabled ends, ridges and hips)? <br />Will the PV system be inslallod with a space of 2" minimum lo 10" maximum between <br />the underside oI modules and the surfacs of the roof? <br />Will the PV system be installed without using any ballast system or counter-weight <br />system? <br />Will the anchors be installed with a maximum horizontal anchor spacing of 6 feet <br />and is this maximum horizontal spacing shown on the plans? <br />Will the minimum 5/16" lag screws be installed with a minimum of 2-112 inc,l,, <br />embedm€nt into roof rafters (with pre-drilled holes) and is this minimum emb€dment <br />shown on the plans? <br />Are ALL the structural pages of the plans WET stampod and signed by a California <br />licensed professional engineer? (including project sp€cific site plan, PV layout, <br />4 <br />5 <br />tsD <br />Etr <br />atr <br />Etr <br />Eltr <br />Ettr <br />'t0 Etr <br />anchorage spacing, anchorag e details and manufaclure/s PV su pport information.) <br />I certify under penalty of periury under thc laws ot the State of California <br />Print Name. TRANG CONG PHAM <br />Phone Number: 714 582 3909 <br />Signature <br />Date: <br />Email Address: <br />Rev:8/1712015 <br />PERMIT@SOUTHWESTSUNSOLAR.COM <br />ovo is true: <br />6. <br />7. <br />8. <br />9.