Laserfiche WebLink
l.1.1.1 Pool <br />u_UILL engineering <br />POOL ENGINEERING INC.By: DEBBIEM <br />Location: Santa Ana, CA,92703-1928 Date: 3/3/2014 <br />Job# 14-0360 <br />LATERAL LOADS (Seismic): <br />Seismic Design Parameters: <br />4-1 Risk Category Seismic Importance Factor <br />R= 6.5 Response Modification Factor <br />PF 1 Redundancy Factor <br />Sos- 0.930 Short Period Design Spectral Acceleration Parameter (ASCE 7-10, Eqn. 11.4-3) <br />Sol = 0.529 <br />Site Class: D <br />Risk Cat.: 11 <br />SDC = D <br />ls Period Design Spectral Acceleration Parameter (ASCE 7-10, Eqn. 11.4-3) <br />(ASCE 7-10, Section 11.4.2) <br />(ASCE 7-10, Table 1.5-1) <br />Seismic Design Category (ASCE 7-10, Tables 11.6-1 and 11.6-2) <br />Base Shear Governing Equations: <br />T= Ct (hn)X Approximate Fundamental Period (ASCE 7-10, Eqn. 12.8-7) <br />where:Ct = 0.02 <br />x = 0.75 <br />hn = 18.5 (ft.) Height to Highest Level <br />T= 0.178 (s) <br />TL = 8.00 (s) Long-Period Transition Period (ASCE 7-10, Fig.22-16) <br />Cs = (SOS |e/R Seismic Response Coefficient (ASCE 7-10, Eqn. 12.8-2) <br />= 0.143 <br />Cs_max = (SOS |e)/(T R)Maximum Seismic Response Coefficient (ASCE 7-10, Eqn. 12.8-3) <br />0.802 <br />(Cs_min)1 = 0.010 Minimum Seismic Response Coefficient (ASCE 7-10, Eqn. 12.8-5) <br />(Cs_min)2 = 0.044 1 SDS Minimum Seismic Response Coefficient (ASCE 7-10, Eqn. 12.8-5 - supplement 2) <br />0.023 <br />(Cs_min)3 = (0-5 Sl |e/R Minimum Seismic Response Coefficient (ASCE 7-10, Eqn. 12.8-5 - supplement 2) <br />0.038 <br />Cs = 0.143078 Seismic Base Shear (ASCE 7-10, Section 12.8-1.1) <br />See next sheet for Lateral Load Distribution Tables <br />3/3/2014 4:16 PM <br />\\peanasv2\pool\Projects Solar\2014\0360-14 Residential\14-0360 SOLAR PANEL CALCS.xlsx <br />Page 10 of 13 <br />©Pool Engineering, Inc. 2014