Laserfiche WebLink
www.hilti.com <br />Hilti PROFIS Engineering 3.1.15 <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c ) 2003-2025 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan <br />34 <br />Company: <br />Address: <br />Phone I Fax: <br />Design: <br />Fastening point: <br />Trimar Engineering <br />7868 De Soto Avenue <br />818-453-0394 | <br />Better Buzz - Menu & Canopy Base Anchor Design <br />Top of Footing <br />Page: <br />Specifier: <br />E-Mail: <br />Date: <br />34 <br />CM <br />eco@trimarengineering.com <br />5/27/2025 <br />Coordinates Anchor [in.] <br />Anchor x y c-x c+x c-y c+y <br />1 -4.750 -4.750 5.282 14.782 5.282 14.782 <br />2 4.750 -4.750 14.782 5.282 5.282 14.782 <br />3 -4.750 4.750 5.282 14.782 14.782 5.282 <br />4 4.750 4.750 14.782 5.282 14.782 5.282 <br />1.7 Installation data <br /> Anchor type and diameter: Hex Head ASTM F 1554 GR. <br /> 36 3/4 <br /> Profile: Square HSS (AISC), HSS6X6X.1875; (L x W x T) = 6.000 in. x 6.000 <br /> in. x 0.188 in. <br /> Item number: not available <br /> Hole diameter in the fixture: df = 0.812 in. Maximum installation torque: - <br /> Plate thickness (input): 0.750 in. Hole diameter in the base material: - in. <br /> Hole depth in the base material: 25.000 in. <br /> Minimum thickness of the base material: 26.000 in. <br />Æ 3/4 in Hex Head ASTM F 1554 GR. 36 with 25 in nominal embedment depth per Technical data , cast in place installation per MPII