Laserfiche WebLink
Hilti PROFIS Engineering 3.1.15 <br />www.hilti.com <br />Company:Trimar Engineering Page:40 <br />Address:7868 De Soto Avenue Specifier:CM <br />Phone I Fax:818-453-0394 |E-Mail:eco@trimarengineering.com <br />Design:Better Buzz - Menu & Canopy Base Anchor Design Date:5/27/2025 <br />Fastening point:Top of Footing <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c ) 2003-2025 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan <br />40 <br />4 Remarks; Your Cooperation Duties <br />●Any and all information and data contained in the Software concern solely the use of Hilti products and are based on the principles, formulas <br />and security regulations in accordance with Hilti's technical directions and operating, mounting and assembly instructions, etc., that must be <br />strictly complied with by the user. All figures contained therein are average figures, and therefore use-specific tests are to be conducted prior to <br />using the relevant Hilti product. The results of the calculations carried out by means of the Software are based essentially on the data you put <br />in. Therefore, you bear the sole responsibility for the absence of errors, the completeness and the relevance of the data to be put in by you. <br />Moreover, you bear sole responsibility for having the results of the calculation checked and cleared by an expert, particularly with regard to <br />compliance with applicable norms and permits, prior to using them for your specific facility. The Software serves only as an aid to interpret <br />norms and permits without any guarantee as to the absence of errors, the correctness and the relevance of the results or suitability for a <br />specific application. <br />●You must take all necessary and reasonable steps to prevent or limit damage caused by the Software. In particular, you must arrange for the <br />regular backup of programs and data and, if applicable, carry out the updates of the Software offered by Hilti on a regular basis. If you do not <br />use the AutoUpdate function of the Software, you must ensure that you are using the current and thus up-to-date version of the Software in <br />each case by carrying out manual updates via the Hilti Website. Hilti will not be liable for consequences, such as the recovery of lost or <br />damaged data or programs, arising from a culpable breach of duty by you.