|
ESR-2144 1 Mos}W#dely:Accepted'and Trusted
<br />3.2.6 Rom'an Pan Tile: The Romah Panitile is'19.ittcheb
<br />(483. mm) long, :10 inches (254 mm)· wide and
<br />appro*imat¢ly 1/2 inch (12.7 mni) thick: The tiles are Type
<br />Ill, Grade. 1, in accordance with ASTM C 1167. Two nail
<br />holes ardprovided at th* top of eaph tile.
<br />The Roman Pan tiles Use eithW Classic or Corona
<br />Tapered Mission tiles 'as cover units. When used with
<br />Classic T®ered, Mission tile covers, the tile's weigh 10.4
<br />pounds:per square.foot (50.8 kg/mb, installed with a 3-inchi
<br />,(76 hifit) iIi*idlap arid '12-inch 1305 mm) pentdr-to-center
<br />iside spacing of pan units. When used with the Corona
<br />Tai*red Misdiori tjle covers, the tiles weigh 10.4 pounds
<br />per square foot (50.8 kg/m2),, installed. with..a 3-inch
<br />:(76 mm) headlap and 13-inch (330 mm) center-to-center·
<br />side.spacing 6fpan UAits.
<br />3.2.7 MF108 Interlocking Flat Tile: The tiles are'
<br />interlobking: flat tiles that·are 135/0 inches (345 mm) lohg,
<br />13'/4 inches (348 mmbvide and 11/2 inches (38 mm),thick.
<br />The-tiled weigh 8.9 pounds per square foot-(43.5 kg/m2)
<br />.when instailed with a 214-Inch (57 mm) head lap and a
<br />16/8-inch-(41 mm) side lap. Two nail holes are provided at
<br />the top of each tile.. The tiles are Type Ill„ Grade· 1,. in
<br />accordance with ASTM C 1167.
<br />3.2.8 Improved-S Tile: Improved-S are Spaniskstyle
<br />.interlocking til;s, 12?/, inches (314 mm) long and;
<br />123/8 Inches (314 mni) wide, and having an' approximate
<br />thickness of 5/8 inch (15.9 mm). The tiles Wigh - 10.8
<br />pounds'per square foot (52.7 kg/m2) When installed:With·a
<br />2-inch (51 mrn) headlap.-Two nail holes are providdd in.the
<br />pan portion of the tile and two lugs are: provided -on .the
<br />back. The tiles are T** 11; Gf#46; 1,:lh ac¢drdance with
<br />ASTMC 1167.
<br />(3.2.9: Otlental Tile: Oriental, tiles are interlocking tiles
<br />ithat.are 12 inches·.(305 mm) long.and 12 Inches (305 mm)
<br />wide, and have an approximate thickness of 5/8 inch
<br />(15.9 mm). The tiles -weigh 8.4 pounds per squate foot
<br />(41.0 kg/nf) when installed with a 23/8-inch (60 mm)
<br />headlap. A nail hole is 076\4064 Ih :the pan 00(tioh and
<br />two lugs are provided on the back. The tiles:are Type ll,
<br />Grad61, in accordance with ASTM C 1'167.
<br />3.2.10 Classic "S" Mission Tile: The Classic °S° Mission:
<br />tiles are S-shaped, 19 inches. (483 mm) long, 11 inches
<br />(279 mm) Wide, ahd,an average of 141nch (127 mm) thick.
<br />AThe tiles' weigh 7.9 pounds per square foot (38.5 kg/m2)
<br />wheti installed with a 3-Inch (76-thm) h«adlip and 23/4-inch
<br />(70 mm) sidelap. The tiles.have two nail holes in the pan
<br />tile knd one hole in the- coVer tile. The tiles are Type 1,
<br />Grade 1,:in accordance with ASTM C 1167.
<br />4.0 INSTALLATION
<br />. 4.1 Gun#ral:
<br />The tilds·mutt bd ilistalled in actbrdancetwitli-th@ Coricret€
<br />and Clay Roof Tile Installation Manualfor Moderate
<br />Cliinate Region#, datel March 2010, published by the Tile
<br />- Roofing Institute <and: the Western States -Roofing
<br />Contractors Association (herein teferred to.as the
<br />TRIANSRCA :installati6n manual), :and:recognized in
<br />ICC-ES evalOation report ESR-2015P/except as noted in
<br />tllis· report: This report andithe.TRI/WSRCA installation
<br />manual must be available at the jobsite atiall times durfng
<br />installatibh.
<br />4.2 Adliesivaly Attadlidd:ISyst@hiat
<br />MCA· .clay roof liles may be ihstallad With roof tile
<br />adhesives that are recognized in a current ICC-ES
<br />6valuation report for use in dayrobf tile. applithtions.
<br />Page 2 of 4
<br />-In#t.®ation *f tiles using these: adhesively aitached
<br />systems must be in .accordance With :the Adhedi*e
<br />manufacturer's ICC-ES evaluationreport:
<br />4.3 Roof Slope LIMItations-:
<br />The tilet·Wr* installEd ht a mirilrijum /66f slop# of 216112
<br />(21 percent) texcept<· for·the : MF108 Interlocking) Flat, the
<br />IMprove-d-*abd th# 02!ental tiles; wlilch must be installed
<br />(at a minimum roof slope of,4:12 (33.3 percent).
<br />4.4 Underlayment:
<br />For adhesively attached systams, underlayment must be fh
<br />accordance with the adhesive manufacturer's ICC-ES
<br />evaluation report
<br />4.5 Fire Classification:
<br />Under the 2009 IBC and IRC, the MCA. clay roof tiles,
<br />installed in accordance with this report, are Class A roof
<br />coverings ih accordan-be with IBC Section 1505.2 and IRC
<br />Section R902.1. When roof til6s are installed with a roof'tile
<br />adhesive, installation must be in. accordance with
<br />ESR-1709.
<br />Under the 2006 :IBC .and:IRC, MCA day' roof tiles,
<br />installed; inaccordahde witlj- this repj587 are Class A roof
<br />fassemblies in accordance with the exception to IBC
<br />Saction 1505.2 and IRC Section R902.1
<br />4.6 WindiR#slstinge:
<br />4.6.1 Mddfidnltally'Fadtehed Systemsti:or applitations
<br />beyond the prescriptive parameters of IBC Table 1507.3.7
<br />and IRC Sattion R905.3.7, the fastehing systems must be
<br />determined to withstand the aerodynamic:uplift moment.In
<br />atcordante withythe: Detign Considerations for High Wind
<br />Applications in Appendix B of the TRI/WSRCA.installation
<br />rfiani:tal..
<br />4.6.2 Adheslvely Attach*d Systenis: S.de<th'etidhesiv-e-
<br />manufacturefs ICCLES:evaluation'report
<br />4.7 Reroofing Applications:
<br />The tiles may be ihstalled over ekisting roofs, prdvided the
<br />requirements of IBC Section 1510 or IRC Sectibn R907, asi
<br />applicable, are met. The roof dassification is as 1noted In
<br />Section 4.5.
<br />5.0 CONDITIONS OF OSE
<br />The MCA jclay roof til6s described: In this report c*rnply
<br />with, or are suitable alternatives to what is specified :in,·
<br />those codes listed in Se@ipn 1.0 of thi&: rdiibil,.®Bject 14
<br />the following conditionsy:
<br />5.1 The tiles must, be: manufactured, identified and:
<br />installed in compliance with this report, the applicable
<br />code and. the TRI/WSRCA installation manual. The
<br />instructions within this report·govern if there are any
<br />conflicts betw*en the TRIANSRC8 installation manual
<br />fand this report.
<br />5.2 'The roof' sheathing and0 roof framing must be
<br />designed for the appropriate 16ads determih« in
<br />accordance with the applicablecode.
<br />6.3":Th# tilgs are. manufactofed ih Corona, California,
<br />Hy-60-0,.Jhpan, and Handa, Aichi; Japan, Ufiddr ati
<br />inspection program administered by RI Ogawa &
<br />Assoclates, IHE (AA-705):
<br />6.0 EVIDENCE SUBMITTED
<br />Data iri accordance with- the ICC-ES Accebtatide Ctitetia
<br />for Clay. and Concrete- Roof Tiles- (AC180), dated June
<br />2009.
|