|
November 14,2012 SIGN COMPONENTS MANUAL (SAM) 74
<br />3. These products are suitable for use in dry, damp and wet locations.
<br />4. These products are not required to be enclosed or protected from the weather in the end product.
<br />5. When these products are used in applications other than signs or outline lighting, the need to conduct a temperature test shallbe considered.
<br />Class 2 Power Supply, Cat. Nos. MJ-ABCD-WXYZ Series, where AB is 12 and CD-WXYZ is 20-1670, 40-3300 or 60-5000..1. These power supplies have a maximum of one Class 2 outputs. The output of these power supplies have been evaluated toClass 2 output requirements for dc circuits.
<br />2. These products with Class 2 outputs are suitable for use in dry and damp locations only.
<br />3. In the end product, power supply spacing to other heat producing components shall be minimum 2 inches spacing tosidewalls, and minimum 2 inches spacing to top of enclosure.
<br />4. These products have not been subjected to Leakage Current, Strain Relief, and Impact Tests. The need to conduct these testsshall be considered in the product. In addition to these tests, the need to conduct the Mold Stress test on model MJ-1260-500
<br />shall be considered in the end product.
<br />5. These products shall be provided with additional enclosure when used in the end product.
<br />Class 2 LEDs, Cht. Nos. Cat. Nos. JE-001X (HS-F504BR4TN), JE-002X (HS-F504BN4TN), JE-003X (HS-F504884TN), JE-0041JE-005X (HS-F504BY4TN), JE-006X (HS-R483AR4CY or HS-R484CN4CY or HS-R484CB4CY), where X may be replaced with A,B, G, M, R or W.
<br />1 These products are only suitable for connection to a Class 2 power source, rated 15 Volt (DC or AC) or less.
<br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage
<br />and energy limited circuit.
<br />3. When units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output
<br />rating of the Class 2 supply.
<br />4. These products are suitable for use in dry, damp and wet locations.
<br />5. These products are not required to be enclosed or protected from the weather in the end product.
<br />Class 2 LED Controllers, Models HM-12RGB5A3-RC, HM-12RGB5A3-XY Series, where suffix X and Y may be any alphanumericcharacters.
<br />1. These products are only suitable for connection to the output of a UL Listed or FUC Class 2 Power Supply rated max 24VDC.2. These products are rated per the Table below. When units are connected to a Class 2 circuit, their ratings are to be limited todraw a total wattage of no greater than the secondary current rating of each Class 2 power supply.
<br />Model Input - Class 2 Output - Class 2
<br />HM-12RGB5A3-XY Series 12 - 24 Vdc 10 - 24 V _ .: 24 W
<br />3. These products are suitable for use in dry, and damp.
<br />4. These products are each rated max. 24 watts. When units are connected to a Class 2 circuit, they are not to draw a total
<br />wattage of greater than the secondary or output rating of the Class 2 supply.
<br />JUSTIN INC E235322
<br />2663 N LEE AVE
<br />SOUTH EL MONTE, CA 91733
<br />Class 2 Power Supply, Model 601-12DC, 601-12DCR, 101-24DCR, C2240-12DCR, C2240-24DCR, C2240-12, C2240-12-240,C2240-24, and C2240-24-240.
<br />1. These power supplies have been evaluated for use in LED signs.
<br />2. The power supplies have outputs that individually comply with Class 2 circuit requirements.
<br />3. These units are suitable for use in dry and damp locations without a need for an additional enclosure.
<br />4. The output of this power source shall not be connected to any other power source or provide power to components connectedto another·power source.
<br />5. These products shall have conductors entering, leaving or residing in the wiring compartment or junction box extending atleast 150 mm (6 in) inside.
<br />Class 2 Power Supply, Model 601-12DC-LC, 601-12DCR-LC, 101-24DCR-LC, 02240-12DCR-LC, C2240-24DCR-LC, C2240-12-
<br />LC, C2240-12-240-LC, C2240-24-LC, and C2240-24-240-LC.
<br />1. These power supplies have been evaluated for use in portable LED signs.
<br />2. The power supplies have outputs that individually comply with Class 2 circuit requirements.
<br />3. These units are suitable for use in dry and damp locations without a need for an additional enclosure.
<br />4. The output of this power source shall not be connected to any other power source or provide power to components connectedto another power source.
<br />5. The attachment plug on the end of the power supply cord is not to be removed.
<br />KBJ SIGN INC E350092
<br />1800 W ADAMS BLVD
<br />LOS ANGELES, CA 90018
<br />Class 2 LED Modules, KPL, FPL, KR3.
<br />1. These products are only suitable for connection to a Class 2 power source rated 12 Volt DC or less.
<br />2. These products are intended for use only when connected to a power source that complies with Class 2 voltage and energy
<br />limited circuit and is rated greater than 12 V DC.
<br />3. When these units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or outputrating of the Class 2 supply.
<br />4. These products are suitable for use in dry, damp and wet locations with supply sources rated at 12 Volts DC or less.
<br />5. These products are not required to be enclosed or protected from the weather in the end product.
<br />6. These products may be secured in place in the end product by any means available.
<br />KEYSTONE TECHNOLOGIES LLC E356111
|