|
June 19, 2013 SIGN COMPONENTS MANUAL (SAM) 74
<br />4. These products are not required to be enclosed or protected from the weather in the end product.
<br />5. These products may be secured in place in the end product by any means available.
<br />KEYSTONE TECHNOLOGIES LLC E356111
<br />PO BOX 246
<br />AMBLER, PA 19002
<br />Class 2 LED Modules, Models KTLD-80-1-24V, KTLD-60-1-12V, KTLD-60-1-24V, KTLD-60-1-24\ASC, KTLD-60-UV-24V, KTLD-
<br />60-UV-24V-SC, KTLD-60-UV-24V-DIW, KTLD-60-UV-1214V, KTLD-60-UV-1214V-SC.
<br />1. These LED drivers have been evaluated using resistive load resulting in the electrical input and output noted on page 1.
<br />2. These LED drivers are provided with Class 2 output.
<br />3. These LED drivers are intended to be operated jn_ a maximum ambient (Ta) noted as below:
<br />Model Ta (°C)
<br />TLD-80-1-24V 40
<br />KTLD-60-1-12\/ 40
<br />:KTLD-60-1-24V 40
<br />'KTLD-60-1-24V-SC 40
<br />®TLD-60-UV-24V 40
<br />f KTLD-60-UV-24\ASC 40
<br />kTLD-60-UV-24\ADIW 52
<br />1<TLD-60-UV-1214V 40
<br />1<TLD-60-UV-1214\ASC 40
<br />4. These LED drivers are intended for use in dry and damp locations except that models KTLD-60-UV-1214V and KTLD-60-UV-
<br />1214\ASC are suitable for dry location only.
<br />5. These LED drivers are provided with 18 AWG AWM input and output leads. The suitability of the wiring and the need for a
<br />suitable enclosure shall be considered in the end product.
<br />6. These LED drivers are intended to be operated on a maximum 20 A branch circuit.
<br />7. The need of the grounding means shall be determined in the end product.
<br />8. These LED drivers shall be enclosed within a suitable end product enclosure.
<br />9. For model KTLD-60-UV-24\ADIW, the conduit knockout test was not conducted. The suitability is to be determined in end
<br />product.
<br />10. In the end product, LED driver spacing to other heat producing components shall be minimum 2 inches spacing to sidewalls,
<br />and minimum 2 inches spacing to top of enclosure.
<br />11. In the end product, LED Drivers shall be located not less than 1 inch (25.4 mm) apart when arranged end-to-end, and not less
<br />than 4 inches (102 mm) apart when arranged otherwise.
<br />KING BILLION (ASIA) LTD E362583
<br />UNIT A 3/F CHEONG SUN TOWER
<br />116-118 WING LOK ST
<br />SHEUNG WAN, HONG KONG
<br />Class 2 LED Modules, designated as XXXX YYYYD/M series, where XXXX and YYYY may be combinations of any numbers.
<br />1. These products are only suitable for connection to a Class 2 power source rated 12 Volt DC or less.
<br />2. These products are intended for use only when connected to a power source that complies with Class 2 voltage and energy
<br />limited circuits.
<br />3. When these units are connected to a Class 2 supply circuit, they are not to draw a total wattage of greater than the secondary
<br />or output rating of the Class 2 supply.
<br />4. These products are suitable for use in dry, damp and wet locations.
<br />5. These products are not required to be enclosed or protected from the weather in the end product.
<br />6. These products may be secured in place in the end product by any means available.
<br />KOLEDO INTERNATIONAL BV
<br />EKKERSRIJT 7051
<br />E346915
<br />5692 HB SON EN BREUGEL, THE NETHERLANDS
<br />LED Light Strings, LED Strings Series 12NC - "Affinium High Powered LED Light Strings", Part Nos. 9290 004 61903, 9290 004
<br />62103, 9290 004 62203,9290 004 62303,9290 004 62403.
<br />1. These components are only suitable for connection to a UL Listed or R/C (UYMR2), Component - Sign Accessory Class 2
<br />power source, rated 30V DC or less.
<br />2. These components have not been evaluated for use and connection to a power source supply with outputs parameters
<br />exceeding the limitations for a Class 2 circuit.
<br />3. Class 2 LED Strings when connected to a Class 2 source, are not to draw a total current or wattage of greater than the
<br />secondary or output rating of the Class 2 circuit.
<br />4. These components are suitable for use in Dry, Damp, and wet locations and are not and are not required to be enclosed or
<br />protected from the weather in the end product when connected to Class 2 source of supply with 30 V DC or less maximum
<br />voltage.
<br />5. These products described in this section may be cut into segments per manufacture's installation instructions.
<br />LED Posterbox modules, Models LPM8W6300K325mm (12.8")300, LPM13W6300K565mm (22.2")300, LPM8W6300K565mm
<br />(22,2")300, LPM6W6300K325mm (12.8")300, LPM8W4000K325mm(12.8")330, LPM13W4000K565mm(22.2")300 or Alternate
<br />Catalog Numbers: 9290 004 834,9290 004 835,9290 004 836,9290 004 837,9290 006 007,9290 006 008. Models LPM6300K
<br />371 mm 4leds 400, LPM6300K 565mm 6leds 400, LPM2700K 371 mm 4leds 400, LPM2700K 565mm 6leds 400, LPM4000K
|