Laserfiche WebLink
M215 Microinverter Quick Install Guide <br />0 Position the Enphase Engage Cable <br />Lay out the cable along the installed racking.0 Ground the Microinverters <br />Ground the microinverters using either the <br />grounding lug with a continuous ground wire <br />or WEEB grounding washers. See notes in <br />Step Deitai/s on back. , <br />continuous <br />ground -*- <br />00 <br />Check th dropconnector labels to <br />be sure that you have <br />tlie right cable. 1 <br />You must use 240 Vac <br />cable for single phase or 208 Vac cable for three-phase. <br />Attach the Microinverters to the PV Racking <br />a. Mark the approximate centers of each PV <br />module on the PV facking. See notes in <br />Step Detai/s on back. <br />0 Dress the Cable <br />a. Attach the cabling to the rack using the <br />cable clips, or you may use tiewraps. <br />cable clip <br />release holes <br />b. Mount the microinverters with the silver side <br />facing up and the b:lack side facing down. <br />Keep the drop connector release <br />holes clear and accessible. <br />b. Dress any excess cabling in loops so that <br />it does not contact the roof. <br />L