Laserfiche WebLink
SolarCity SleekMountTM - Comp SolarCity SleekMountTM - Comp <br />The SolarCity SleekMount hardware solution <br />is optimized to achieve superior strength and <br />aesthetics while minimizing roof disruption and <br />labor. The elimination of visible rail ends and <br />mounting clamps, combined with the addition <br />of array trim and a lower profile all contribute <br />to a more visually appealing system. SleekMount <br />utilizes Zep CompatibleTM modules with <br />strengthened frames that attach directly to <br />Zep Solar standoffs, effectively eliminating the <br />need for rail and reducing the number of <br />standoffs required. In addition, composition <br />shingles are not required to be cut for this <br />system, allowing for minimal roof disturbance. <br />e <br />• Utilizes Zep Solar hardware and UL 1703 listed <br />Zep CompatibleTM modules <br />• Interlock and grounding devices in system UL <br />listed to UL 2703 <br />• Interlock and Ground Zep ETL listed to UL 1703 <br />as "Grounding and Bonding System" <br />• Ground Zep UL and ETL listed to UL 467 as <br />grounding device <br />• Painted galvanized waterproof flashing <br />• Anodized components for corrosion resistance <br />• Applicable for vent spanning functions <br />Components <br /> 5/16" Machine Screw <br />® Leveling Foot <br />© Lag Screw <br />@ Comp Mount <br />® Comp Mount Flashing <br />Installation Instructions <br />® Drill Pilot Hole of Proper Diameter for <br />Fastener Size Per NDS Section 1.1.3.2 <br />@ Seal pilot hole with roofing sealant <br />@ Insert Comp Mount flashing under upper <br />layer of shingle <br />® Place Comp Mount centered <br />upon flashing <br />® Install lag pursuant to NDS Section 11.1.3 <br />with sealing washer. <br />@ Secure Leveling Foot to the Comp Mount <br />using machine Screw <br />0 Place module <br />®e <br />%/Solartity January 2013 Solar€ity January 2013 <br />GO.Ar/# <br />COMP¢S. <br />il <br />0 r- 3*@. f,@U <br />1