Laserfiche WebLink
93 SIGN COMPONENTS MANUAL (SAM)June 19,2013 <br />N GLANTZ & SON E352418 <br />2501 CONSTANT COMMENT PL <br />LOUISVILLE, KY 40299 <br />Structural panels, Models EMPB30, EMPB31L <br />1. The;structural panel is suitable for use'in dry, damp and wet locations. <br />2. The structural panel may be used in decorative and sign body applications, and shall not be used as part of the sign enclosure. <br />3. The panel is not suitable for use in component mounting and support applications. <br />4. Rain tightness shall betdetermined in the end product. <br />5. Electrical spacing and bonding for grounding shall comply with the end product standard. <br />6. Not suitable for use in terminating conduit. <br />7. Any parts other than neon standeffs or small decorativeparts secured to the panel must be secured by means of through b01ts, <br />nuts and washers. The minimum washer diameter is 7/16 in. <br />8. A letter made from a structuralipanel shall have at least two points af support and shall have no point more than 10 in. from a <br />point of support. <br />9. The structural panels are rated 75°C, where consideration will need to be given to end product thermal spacing from heat <br />producing components. <br />10. These materials are available as unpainted aluminum or pre-painted aluminum. <br />11. This material has not been investigated for the securernent of conduit,; electrode housings or the like, suitability shall be <br />determined in the end product, <br />NANJING CEDAR GREEN TECHNOLOGIES CO LTD E358556 <br />739 SHENGAN AVENUEY <br />BINJIANG DEVELOPMENT AREA <br />JIANGNING DISTRICT <br />NANJING, JIANGSU CHINA <br />Class 2 LED modules, Cat. No. CD-MXX-XXX-XX-XX-XXX series. The first X can be any one of the Arabic numerals of 1 through <br />9, these;indicate LED quantity; The second X can be any letter in alphabet, represent for beam angel: The third X is for the supplier <br />of the lamp: The fourth X is for the model of the lamp, The fifth X can be any one of alphanumeric characters; The sixth and <br />seventh X is for the color; The eighth and ninth X is for the product versions: The last three X are for the input voltage, 12V <br />represent the input voltage is 12VDC, 15V represent the input voltage is 15VDC. <br />1. These products are only suitable for connection to a Class 2 powersource, rated 15 Volt DC or less. (For model; CD- MXX-XXX- <br />XX-XX-15\0 <br />2 These products are only suitable for connection to a Class 2 power source, rated 1 2'Volt DC or less. (For model CD- MXX-XXX- <br />XX-XX-12\0 <br />3. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage <br />and energy limits and which is rated greater than electrical ratings. <br />4. When units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output eating <br />of the Class 2 supply. <br />5. These products are suitable for use in dry, damp and wet locations with supply sources rated at 15 Vdc or less. (For model CD- <br />MXX-XXX-XX-XX-15\0 <br />6. These products are suitable for use ih dry, damp and wet locations with supply sources rated at 12 Vdc or less. (For model CD- <br />MXX-XXX-XX-XX-12V) <br />7. These products are not required to be enclosed or protected from the weather irrthe end;product. <br />8. The suitability of supply leads shall be determined in end use. <br />NANOLUMENS INC <br />4900 AVALON RIDGE PKY <br />NORCROSS, GA 30071 <br />Component Signs, Models NS-521, NS-600, NS-625. <br />1. These components should be iristalled in accordance with the manufacturers installation instructions. <br />2. These, products are suifable for use in dry locations. <br />3. Each power supply can only drive max number of 15 modules. <br />4. These units are rated as follows; <br />E348993 <br />1 Input Output Per Power Supply <br />Input Voltage Max. Inbut Current Input Frequency Output Voltage Max. Output Current <br />Model Designation Nam (A)(Hz)(Vdc) <br />NS-521. NS-600. NS-625 120-240 5-2.5 50/60 5 60 <br />5. These products shall be enclosed in a suitable electric enclosure in the end product. <br />6. When provided with attachment plug, this product shall be connected to a dedicated receptacle in a permanently connected <br />sign. <br />7. These produets are suitable for factory installation only. <br />NC LED CO LTD <br />16-17 GAGOK-RI <br />HWADO-EUP <br />NAMYANGJU-SI, GYEONGGI-DO 472-841 REPUBLIC OF KOREA <br />E347462 <br />%