|
99 SIGN COMPONENTS MANUAL (SAM)October 1, 2013
<br />11. This material has not been investigated for the securement of conduit, electrode housings or the like, suitability shall be
<br />determined in the end product.
<br />NANJING CEDAR GREEN TECHNOLOGIES CO LTD
<br />739 SHENGAN AVENUEY
<br />BINJIANG DEVELOPMENT AREA
<br />JIANGNING DISTRICT
<br />E358556
<br />NANJING, JIANGSU CHINA
<br />Class 2 LED modules, Cat. No. CD-MXX-XXX-XX-XX-XXX series. The first X can be any one of the Arabic numerals of 1 through
<br />9, these indicate LED quantity; The second X can be any letter in alphabet, represent for beam angel; The third X is for the supplier
<br />of the lamp; The fourth X is for the model of the lamp; The fifth X can be any one of alphanumeric characters; The sixth and
<br />seventh X is for the color; The eighth and ninth X is for the product versions; The last three X are for the input voltage, 12V
<br />represent the input voltage is 12VDC, 15V represent the input voltage is 15VDC.
<br />1. These products are only suitable for connection to a Class 2 power source, rated 15 Volt DC or less. (For model CD- MXX-XXX-
<br />XX-XX-15V)
<br />2. These products are only suitable for connection to a Class 2 power source, rated 12 Volt DC or less. (For model CD- MXX-XXX-
<br />XX-XX-12\0
<br />3. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage
<br />and energy limits and which is rated greater than electrical ratings.
<br />4, When units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output rating
<br />of the Class 2 supply.
<br />5. These products are suitable for use in dry, damp and wet locations. with supply sources rated at 15 Vdc or less. (For model CD-
<br />MXX-XXX-XX-XX-15\,9
<br />6. These products are suitable for use in dry, damp and wet locations with supply sources rated at 12 Vdc or less. (For model CD-
<br />MXX-XXX-XX-XX-12\4
<br />7. These products are not required to be enclosed or protected from the weather in the end product.
<br />8. The suitability of supply leads shall be determined in end use.
<br />NANOLUMENS INC
<br />4900 AVALON RIDGE PKY
<br />NORCROSS, GA 30071
<br />Component Signs, Models NS-400, NS-500, NS-521, NS-600, NS-625, NS-1000.
<br />1. These components should be installed in accordance with the manufacturefs installation instructions.
<br />2. These products are suitable for use in dry locations.
<br />3. Each power supply can only drive max number of 15 modules.
<br />4. These units are rated as follows;
<br />E348993
<br />Input Output Per Power Supply
<br />Input Voltage Max. Input Current Input Frequency Output Voltage Max. Output Current
<br />Model Designation (Vac) (A) (Hz)(\/dc) (A)
<br />NS-400, NS-500, NS-521,120-240 5-2.5 50/60 5 60
<br />NS-600, NS-625, NS-
<br />1000
<br />5. These products shall be enclosed in a suitable electric enclosure in the end product.
<br />6. When provided with attachment plug, this product shall be connected to a dedicated receptacle in a permanently connected
<br />sign.
<br />7. These products are suitable for factory installation only.
<br />NC LED CO LTD
<br />16-17 GAGOK-RI
<br />E347462
<br />HWADO-EUP
<br />NAMYANGJU-SI, GYEONGGI-DO 472-841 REPUBLIC OF KOREA
<br />Sign Accessories, Class 2 LED Modules: HLC1, HLC2S, HLC2, HLC3S, HLC3, HLC4, OMX-L4, OMX-L3, OMX-M3, OMX-M2,
<br />OMX-S2, OMX-Nl, CC-IP-04, CC-IP-03L, CC-IP-03, CC-IP-02L, CC-IP-02, CC-IP-01, ELW4, ELW3L, ELW3, ELW2L, ELW2,
<br />ELW1, CCL4S, CCL3L, CCL3, CCL2L, CCL2, CCL1, LX-HLC4, LX-HLC3S, LX-HLC2S, EC01, ECO2S, EC02, ECO3S, EC03,
<br />ECO4, EC-IP-04, EC-IP-03L, EC-IP-03, EC-IP-02L, EC-IP-02, EC-IP-01, eco max OMX-L4, eco max OMX-L3, eco max OMX-M3,
<br />eco max OMX-M2, eco max OMX-S2, eco max OMX-Nl, LX-ECO4, LX-ECO3S, LX-ECO2S, NCP1, NCP2S, NCP2, NCP3S,
<br />NCP3, NCP4, CC[-4, NCC3, NCC36, NCC2, NCC26, NCC 1, ID<-HLC4, L.X-HLOS, U<-HLC23, LX-ECO4, LX-ECO3S, LX-
<br />ECO2S, MIN13, RGB3, RGB4,1-X-RGB3, LX-RGB4.
<br />1. These products are only suitable for connection to a Class 2 power source rated 12 Volt DC or less.
<br />2. These products are intended for use only when connected to a power source that complies with Class 2 voltage and energy
<br />limited circuit and is rated greater than 12 V DC.
<br />3. When these units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output
<br />rating of the Class 2 supply.
<br />4, These products are suitable for use in dry, damp and wet locations with supply sources rated at 12 Volts DC or less.
<br />5. These products are not required to be enclosed or protected from the weather in the end product.
<br />6. These products may be secured in place in the end product by any means.
<br />NEO-NEON LED LIGHTING INTERNATIONAL LTD
<br />BLK B, 12th FL
<br />E252578
|